Download or read book Aquananotechnology written by David E. Reisner and published by CRC Press. This book was released on 2014-09-24 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world’s fresh water supplies are dwindling rapidly—even wastewater is now considered an asset. By 2025, most of the world's population will be facing serious water stresses and shortages. Aquananotechnology: Global Prospects breaks new ground with its informative and innovative introduction of the application of nanotechnology to the remediation of contaminated water for drinking and industrial use. It provides a comprehensive overview, from a global perspective, of the latest research and developments in the use of nanotechnology for water purification and desalination methods. The book also covers approaches to remediation such as high surface area nanoscale media for adsorption of toxic species, UV treatment of pathogens, and regeneration of saturated media with applications in municipal water supplies, produced water from fracking, ballast water, and more. It also discusses membranes, desalination, sensing, engineered polymers, magnetic nanomaterials, electrospun nanofibers, photocatalysis, endocrine disruptors, and Al13 clusters. It explores physics-based phenomena such as subcritical water and cavitation-induced sonoluminescence, and fog harvesting. With contributions from experts in developed and developing countries, including those with severe contamination, such as China, India, and Pakistan, the book’s content spans a wide range of the subject areas that fall under the aquananotechnology banner, either squarely or tangentially. The book strongly emphasizes sorption media, with broad application to a myriad of contaminants—both geogenic and anthropogenic—keeping in mind that it is not enough for water to be potable, it must also be palatable.
Download or read book Shaking the Foundations of Geo engineering Education written by Bryan A. McCabe and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the international conference Shaking the Foundations of Geo-engineering Education (NUI Galway, Ireland, 4-6 July 2012), a major initiative of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE) Technical Committee (TC306) on Geo-engineering Education. SFGE 2012 has been carefully crafted to showcase a diversity of effective and engaging approaches to geo-engineering education while raising awareness of how crucial this effort is to the future development of the engineering profession. The five keynote papers were chosen to pr.
Download or read book Engineering Education for a Smart Society written by Michael E. Auer and published by Springer. This book was released on 2017-07-05 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the ‘World Engineering Education Forum & Global Engineering Deans Council,’ held in November 2016 in Seoul, Korea. The massive changes currently underway in all areas of society, especially in engineering (and consequently in engineering education), call for new pedagogic qualifications and approaches. To face these current real-world challenges, higher education has to find innovative ways to quickly respond to these new needs. The papers gathered here address three essential problems:- The main approach to engineering in the 21st century is collaboration - at many levels, within universities or colleges, between institutions, and on a global scale. At the same time, we need a new quality of collaboration between academia, industry, professional and governmental organizations. - The complexity of engineering projects and solutions is rapidly growing, and increasingly includes non-technical aspects. - One of the key tasks for future engineers will be the development of a sustainable society, which is essential to keeping the global environment in balance.
Download or read book Engineering Education Trends in the Digital Era written by SerdarAsan, ?eyda and published by IGI Global. This book was released on 2020-02-21 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the most influential activity for social and economic development of individuals and societies, education is a powerful means of shaping the future. The emergence of physical and digital technologies requires an overhaul that would affect not only the way engineering is approached but also the way education is delivered and designed. Therefore, designing and developing curricula focusing on the competencies and abilities of new generation engineers will be a necessity for sustainable success. Engineering Education Trends in the Digital Era is a critical scholarly resource that examines more digitized ways of designing and delivering learning and teaching processes and discusses and acts upon developing innovative engineering education within global, societal, economic, and environmental contexts. Highlighting a wide range of topics such as academic integrity, gamification, and professional development, this book is essential for teachers, researchers, educational policymakers, curriculum designers, educational software developers, administrators, and academicians.
Download or read book Building Knowledge in Higher Education written by Christine Winberg and published by Taylor & Francis. This book was released on 2020-05-27 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: From pressures to become economically efficient to calls to act as an agent of progressive social change, higher education is facing a series of challenges. There is an urgent need for a rigorous and sophisticated research base to support the informed development of practices. Yet studies of educational practices in higher education remain theoretically underdeveloped and segmented by discipline and country. Building Knowledge in Higher Education illustrates how Legitimation Code Theory is bringing research together from across the disciplinary map and enabling practical change in a rigorously theorized way. The volume addresses both students and educators. Part I explores ways of supporting student achievement from STEM to the arts, from introductory courses to doctoral training, and from using new digital media to reflective writing. Part II focuses on academic staff development in higher education, reaching from curriculum design to pedagogic practices. All chapters focus on issues of contemporary relevance to higher education, showing how Legitimation Code Theory enables these issues to be understood and practices improved. Building Knowledge in Higher Education brings together internationally renowned scholars in higher education studies, academic development, academic literacies, and sociology, with some of the brightest new researchers. The volume significantly extends understandings of teaching and learning in changing higher education contexts and so contributes to educational research and practice. It will be essential reading not only to scholars and students in these fields but also to scholars and educators in higher education more generally.
Download or read book Using Cognitive and Affective Metrics in Educational Simulations and Games written by Harold F. O'Neil and published by Taylor & Francis. This book was released on 2021-05-17 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting original studies and rich conceptual analyses, this volume explores how cognitive and affective metrics can be used to effectively assess, modify, and enhance learning and assessment outcomes of simulations and games used in education and training. The volume responds to the increasing use of computer-based simulations and games across academic and professional sectors by bringing together contributions from different research communities, including K-12 and postsecondary education, medical, and military contexts. Drawing on empirical results, the chapter authors focus on the design and assessment of educational simulations and games. They describe how quantitative and qualitative metrics can be used effectively to evaluate and tailor instructional resources to the cognitive and affective needs of the individual learner. In doing so, the volume enhances understanding of how games and simulations can intersect with the science of learning to improve educational outcomes. Given its rigorous and multidisciplinary approach, this book will prove an indispensable resource for researchers and scholars in the fields of educational assessment and evaluation, educational technology, military psychology, and educational psychology.
Download or read book Knowledge Curriculum and Preparation for Work written by Stephanie Allais and published by BRILL. This book was released on 2018-04-16 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Knowledge, Curriculum, and Preparation for Work, Stephanie Allais and Yael Shalem offer a timely collection of articles approaching debates on economic and social change and employment within different types of economies.
Download or read book Geotechnical Safety and Risk V written by T. Schweckendiek and published by IOS Press. This book was released on 2015-10-09 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Risk and Safety V contains contributions presented at the 5th International Symposium on Geotechnical Safety and Risk (5th ISGSR, Rotterdam, 13-16 October 2015) which was organized under the auspices of the Geotechnical Safety Network (GEOSNet) and the following technical committees of the of the International Society of Soil Mechanics and Geotechnical Engineering (ISSGME): • TC304 Engineering Practice of Risk Assessment & Management • TC205 Safety and Serviceability in Geotechnical Design • TC212 Deep Foundations • TC302 Forensic Geotechnical Engineering Geotechnical Risk and Safety V covers seven themes: 1. Geotechnical Risk Management and Risk Communication 2. Variability in Ground Conditions and Site Investigation 3. Reliability and Risk Analysis of Geotechnical Structures 4. Limit-state design in Geotechnical Engineering 5. Assessment and Management of Natural Hazards 6. Contractual and Legal Issues of Foundation and (Under)Ground Works 7. Case Studies, Monitoring and Observational Method The 5th ISGSR is the continuation of a series of symposiums and workshops on geotechnical risk and reliability, starting with LSD2000 (Melbourne, Australia), IWS2002 (Tokyo and Kamakura, Japan), LSD2003 (Cambridge, USA), Georisk2004 (Bangalore, India), Taipei2006 (Taipei, Taiwan), the 1st ISGSR (Shanghai, China, 2007), the 2nd ISGSR (Gifu, Japan, 2009), the 3rd ISGSR (Munich, Germany, 2011) and the 4th ISGSR (Hong Kong, 2013).
Download or read book Understanding and Reducing Landslide Disaster Risk written by Kyoji Sassa and published by Springer Nature. This book was released on 2020-12-21 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a part of ICL new book series “ICL Contribution to Landslide Disaster Risk Reduction” founded in 2019. Peer-reviewed papers submitted to the Fifth World Landslide Forum were published in six volumes of this book series. This book contains the followings: • Four Forum lectures and one award paper • Sendai Landslide Partnerships, Kyoto Landslide Commitment, and International Programme on Landslides. • Landslide-induced tsunamis • Landslides at UNESCO designates sites and contribution from WMO, FAO, and IRDR • Education and Capacity Development for Risk Management and Risk Governance Prof. Kyoji Sassa is the Founding President and the Secretary-General of International Consortium on Landslides (ICL). He has been the Editor-in-Chief of International Journal Landslides since its foundation in 2004. Prof. Matjaž Mikoš is the Vice President of International Consortium on Landslides and Vice President of Slovenian Academy of Engineering. He is a Professor and Dean of Faculty of Civil and Geodetic Engineering, University of Ljubljana, Slovenia. Dr. Shinji Sassa is Head of Soil Dynamics Group and Research Director of International Research Center for Coastal Disasters, Port and Airport Research Institute, National Institute of Maritime, Port and Aviation Technology, Japan. Prof. Peter Bobrowsky is the President of International Consortium on Landslides. He is a Senior Scientist of Geological Survey of Canada, Ottawa, Canada. Prof. Kaoru Takara is the Executive Director of International Consortium on Landslides. He is a Professor and Dean of Graduate School of Advanced Integrated Studies (GSAIS) in Human Survivability (Shishu-Kan), Kyoto University. Dr. Khang Dang is the Secretary General of the Fifth World Landslide Forum. He also serves as the Research Promotion Officer of ICL and a Lecturer at the University of Science, Vietnam National University, Hanoi.
Download or read book Geotechnical Engineering Education and Training written by I Antonescu and published by CRC Press. This book was released on 2020-09-10 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers and reports from the Conference held in Romania, June 2000. The book covers many topics, for example, place, role and content of geotechnical engineering in civil, environmental and earthquake engineering.
Download or read book Education and Training in Geo Engineering Sciences written by Iacint Manoliu and published by CRC Press. This book was released on 2008-05-20 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of topics (curricular matters in geo-engineering education, teaching; learning and assessment in geo-engineering education; challenges in geotechnical engineering education; issues in education and training in Engineering Geology; the link university -professional world in geo-engineering, this book will be invaluable to university teachers, academics and professionals involved in education and training in geo-engineering sciences.
Download or read book Geotechnical Engineering for the Preservation of Monuments and Historic Sites III written by Renato Lancellotta and published by CRC Press. This book was released on 2022-06-15 with total page 1238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conservation of monuments and historic sites is one of the most challenging problems facing modern civilization. It involves, in inextricable patterns, factors belonging to different fields (cultural, humanistic, social, technical, economical, administrative) and the requirements of safety and use appear to be (or often are) in conflict with the respect of the integrity of the monuments. The complexity of the topic is such that a shared framework of reference is still lacking among art historians, architects, structural and geotechnical engineers. The complexity of the subject is such that a shared frame of reference is still lacking among art historians, architects, architectural and geotechnical engineers. And while there are exemplary cases of an integral approach to each building element with its static and architectural function, as a material witness to the culture and construction techniques of the original historical period, there are still examples of uncritical reliance on modern technology leading to the substitution from earlier structures to new ones, preserving only the iconic look of the original monument. Geotechnical Engineering for the Preservation of Monuments and Historic Sites III collects the contributions to the eponymous 3rd International ISSMGE TC301 Symposium (Naples, Italy, 22-24 June 2022). The papers cover a wide range of topics, which include: - Principles of conservation, maintenance strategies, case histories - The knowledge: investigations and monitoring - Seismic risk, site effects, soil structure interaction - Effects of urban development and tunnelling on built heritage - Preservation of diffuse heritage: soil instability, subsidence, environmental damages The present volume aims at geotechnical engineers and academics involved in the preservation of monuments and historic sites worldwide.
Download or read book Fundamentals of Geotechnical Engineering written by Braja M. Das and published by CL Engineering. This book was released on 2005 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the essential components of Braja Das' market leading texts, PRINCIPLES OF GEOTECHNICAL ENGINEERING and PRINCIPLES OF FOUNDATION ENGINEERING. It includes the fundamental concepts of soil mechanics as well as foundation engineering, including bearing capacity and settlement of shallow foundations (spread footings and mats), retaining walls, raced cuts, piles, and drilled shafts. Intended as an introductory text, the book stresses the fundamental principles without becoming cluttered with excessive details and alternatives. While featuring a wealth of worked-out examples and figures that help students with theory and problem-solving skills, Das maintains the careful balance of current research and practical field applications that has made has made his books the leaders in the fields.
Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 8083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Download or read book Physical Modelling in Geotechnics Two Volume Set written by Sarah Springman and published by CRC Press. This book was released on 2010-06-17 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions.Topics presented at the conference:Soil - Structure - Interaction;
Download or read book Geotechnical Earthquake Engineering written by Ikuo Towhata and published by Springer Science & Business Media. This book was released on 2008-12-19 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating new book examines the issues of earthquake geotechnical engineering in a comprehensive way. It summarizes the present knowledge on earthquake hazards and their causative mechanisms as well as a number of other relevant topics. Information obtained from earthquake damage investigation (such as ground motion, landslides, earth pressure, fault action, or liquefaction) as well as data from laboratory tests and field investigation is supplied, together with exercises/questions.
