Download or read book Slopes and Excavations written by Bernhard Wietek and published by Springer Nature. This book was released on 2022-01-04 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Böschungen als geneigte Erdoberflächen kommen überall vor. Sie werden bearbeitet und so der Zustand verändert. Damit müssen auch die Auswirkungen dieser Veränderungen betrachten und sich eine Gewissheit über die Sicherheit der Böschungen verschaffen werden. Erst mit dieser Kenntnis sollten Veränderungen durchgeführt werden um so auch deren Auswirkung die Umgebung abschätzen zu können. Baugruben werden immer tiefer und näher an Nachbarbauten gelegt. Es werden Verfahren angewendet, die den Sicherheitserfordernissen entsprechen. Die wirtschaftlichen Anforderungen lassen oft riskante Verfahren in den Blickwinkel kommen. Es sollte jedoch neben der Kosten besonders die Sicherheit für alle Bauwerke im Vordergrund stehen.

Download or read book Fourth Interim Report on the Excavations at Maumbury Rings Dorchester 1912 written by Harold St. George Gray and published by . This book was released on 1913 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ICE Manual of Geotechnical Engineering Volume 2 written by Tim Chapman and published by Emerald Group Publishing. This book was released on 2023-11-17 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.

Download or read book AUA Guidelines for Backfilling and Contact Grouting of Tunnels and Shafts written by Raymond W. Henn and published by Thomas Telford. This book was released on 2003 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Introduction - Affects of geological conditions of grouting - Structural and operations requirements of the completed facility - Grouting of various lining types - Grout materials - Grout properties - Backfill grouting - Contact grouting - Grouting equipment - Record keeping - Quality control - Contract documents

Download or read book Deep Excavations written by Malcolm Puller and published by Thomas Telford. This book was released on 2003 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book assembles the practical rules and details for the efficient and economical execution of deep excavations. It draws together a wealth of experience of both design and construction from published work and the lifetime practice of the author. This second edition is extensively revised to include changes in design emphasis including those due to Eurocode 7 and descriptions of the latest equipment, construction techniques and geotechnical processes. Additional details include those of the latest piling and diaphragm wall equipment and innovations in top-down construction applied to basements and cut-and-cover works. The section on caissons has been expanded to include design methods."--BOOK JACKET.

Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2003 with total page 1432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Excavations at Sarachane in Istanbul Volume 1 written by R. Martin Harrison and published by Princeton University Press. This book was released on 2014-07-14 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is the first volume of two that will be the full report of major excavations carried out by Dumbarton Oaks and the Istanbul Archaeological Museum at Sarachane in the heart of ancient Constantinople. This volume includes discussion of excavation and stratigraphy; catalogs of sculpture, revetment, mosaic, small finds and other materials: and general treatment of architecture, sculpture, and history of the site. Originally published in 1986. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.

Download or read book Drilled Shafts written by National Highway Institute (U.S.) and published by . This book was released on 1988 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.

Download or read book An Introduction to Construction of Tunnels and Shafts for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-06-09 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in construction of tunnels and shafts. Here is what is discussed: 1. GENERAL, 2. TUNNEL EXCAVATION BY DRILLING AND BLASTING, 3. TUNNEL EXCAVATION BY MECHANICAL MEANS, 4. INITIAL GROUND SUPPORT, 5. SEQUENTIAL EXCAVATION AND SUPPORT, 6. PORTAL CONSTRUCTION, 7. SHAFT CONSTRUCTION, 8. OPTIONS FOR GROUND IMPROVEMENT, 9. DRAINAGE AND CONTROL OF GROUNDWATER, 10. CONSTRUCTION OF FINAL, PERMANENT TUNNEL LININGS, 11. VENTILATION OF TUNNELS AND SHAFTS, 12. SURVEYING FOR TUNNELS AND SHAFTS, 13. CONSTRUCTION HAZARDS AND SAFETY REQUIREMENTS, 14. ENVIRONMENTAL CONSIDERATIONS AND EFFECTS, 15. CONTRACTING PRACTICES, 16. PRACTICAL CONSIDERATIONS FOR THE PLANNING OF TUNNEL PROJECTS.

Download or read book Mine Safety Rules written by California. Industrial Accident Commission and published by . This book was released on 1918 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shaft Engineering written by Institution of Mining and Metallurgy and published by CRC Press. This book was released on 2005-08-11 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the Shaft Engineering conference, organized by the Institution of Mining and Metallurgy in association with the Institution of Civil Engineers and the Institution of Mining Engineers, and held in Harrogate, England, from 5 to 7 June, 1989.

Download or read book Design Analysis in Rock Mechanics Second Edition written by William G. Pariseau and published by CRC Press. This book was released on 2011-09-29 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive introduction to rock mechanics treats the basics of rock mechanics in a clear and straightforward manner and discusses important design problems in terms of the mechanics of materials. This extended second edition includes an additional chapter on rock bursts and bumps, a part on basic dynamics, and numerous additional examples and exercises throughout the chapters. Developed for a complete class in rock engineering, Design Analysis in Rock Mechanics, Second Edition uniquely combines the design of surface and underground rock excavations and addresses: Rock slope stability in surface excavations, from planar block and wedge slides to rotational and toppling failures Shaft and tunnel stability, ranging from naturally supported openings to analysis and design of artificial support and reinforcement systems Entries and pillars in stratified ground Three-dimensional caverns, with an emphasis on cable bolting and backfill Geometry and forces of chimney caving, combination support, and trough subsidence Rock bursts and bumps in underground excavations, with a focus on dynamic phenomena and on fast and sometimes catastrophic failures The numerous exercises and examples familiarize the reader with solving basic practical problems in rock mechanics through various design analysis techniques and their applications. Supporting the main text, appendices provide supplementary information about rock, joint, and composite properties, rock mass classification schemes, useful formulas, and an extensive literature list. The large selection of problems at the end of each chapter can be used for homework assignments. Explanatory and illustrative in character, this volume is suited for courses in rock mechanics, rock engineering and geological engineering design for undergraduate and first-year graduate students in mining, civil engineering, and applied earth sciences. Moreover, it will form a good introduction to the subject of rock mechanics for earth scientists and engineers from other disciplines.

Download or read book Report of the Industrial Accident Commission of the State of California written by California. Industrial Accident Commission and published by . This book was released on 1918 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Excavations at El Ashmunein written by A. Jeffrey Spencer and published by . This book was released on 1991 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The American Digest Annotated Key number Series written by and published by . This book was released on 1912 with total page 2466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Elementary Course of Civil Engineering written by Dennis Hart Mahan and published by . This book was released on 1855 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ancient Settlement in the Zammar Region Excavations at Tell Abu Dhahir written by St John Simpson and published by BAR International Series. This book was released on 2003 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: "British School of Archaeology in Iraq. Department of Antiquities and Heritage, Baghdad"--v. 2.