Download or read book Servo Scanning 3D Micro Electro Discharge Machining written by Hao Tong and published by Springer Nature. This book was released on 2022-06-21 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the systematic knowledge of a novel process of servo scanning 3D micro-electro-discharge machining (SS-3D micro-EDM), covering principles, methods, technologies, and optimization for machining 3D microstructures of conductive materials. The content emphasizes the systematic knowledge as well as the frontier research progress of SS-3D micro-EDM, allowing it to be used as a reference handbook for planning the whole machining process of 3D microstructures, for designing machining systems or machine tools, and even for understanding the ideas of innovative processes. The processes and the machine tools of SS-3D micro-EDM have promising applications in multi-fields for machining micro-devices or microstructures made of melt and metal alloy materials. The included methods and technologies are verified by testing and machining experiments. Thus, this book presents many machining examples, including the experimental parameters, conditions, and systems. These help the readers understand the concepts, theories, and methods easily and provide practical operation guidance for engineering applications in industrial machining processes and machine tools.
Download or read book Micro Electro Discharge Machining written by Ajay M. Sidpara and published by CRC Press. This book was released on 2019-08-20 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro Discharge Machining (EDM) is a prominent technology for the fabrication of micro components in many fields. Nowadays, it is used like a conventional machine tool due to favorable characteristics. This book provides the fundamental knowledge of the principles of the process and its variants, the different process parameters, the role of machine components and systems, the challenges, and how to eliminate processing errors. It also includes real life applications of micro EDM in different areas with the most relevant examples.
Download or read book Micro electrical Discharge Machining Processes written by Golam Kibria and published by Springer. This book was released on 2018-12-15 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.
Download or read book Micro Electro fabrication written by Tanveer Saleh and published by Elsevier. This book was released on 2021-05-14 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro-fabrication outlines three major nanoscale electro-fabrication techniques, including electro-discharge machining, electrochemical machining and electrochemical deposition. Applications covered include the fabrication of nozzles for automobiles, miniature hole machining for aerospace turbine blade cooling, biomedical device fabrication, such as stents, the fabrication of microchannels for microfluidic application, the production of various MEMS devices, rapid prototyping of micro components, and nanoelectrode fabrication for scanning electron microscopy. This comprehensive book discusses the fundamental nature of the various electro-fabrication processes as well as mathematical modelling and applications. It is an important reference for materials scientists and engineers working at the nanoscale. Provides state-of-the-art research investigations on various topics of micro/nano EDM, micro LECD, micro/nano ECM and ECDM techniques Compares a variety of electro-fabrication techniques, outlining which is best in different situations Outlines a variety of modeling and optimization techniques relating to micro/nano EDM, micro LECD, micro/nano ECM and ECDM
Download or read book Accuracy Enhancement Technologies for Micromachining Processes written by Golam Kibria and published by Springer Nature. This book was released on 2020-02-20 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the demand for micro-featured components on the one hand, and successful micromachining of miniature products on the other. In addition to covering micromachining in the broader sense, it specifically addresses novel machining strategies implemented in various advanced micromachining processes to improve machining accuracy, energy consumption, component durability, and miniature-scale applicability. The book’s main goal is to present the capabilities of advanced micromachining processes in terms of miniature product manufacturing by highlighting various innovative machining strategies that can be used to augment the production scale and precision alike.
Download or read book Electro Micromachining and Microfabrication written by Sandip Kunar and published by CRC Press. This book was released on 2024-04-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between the need for micro elements and the profitable microfabrication of goods, this new book provides an informative overview of the electro-micromachining and microfabrication processes, varieties, and important applications. Opening with an overview of a variety of micromachining technologies, with an emphasis on nontraditional approaches and recent advances in each, the volume discusses the ultrasonic micromachining processes for producing a variety of micro-shapes, such as micro-holes, micro-slots, and micro-walls, as well as assisted hybrid micromachining with ultrasonic vibration of the tool or workpiece, all which help to improve precision and to advance research. Computer-aided design and computer-aided manufacturing dental micromachining technologies are discussed. Micro-electrical discharge machining, laser micro grooving, and laser micromachining are among the advanced micro-manufacturing processes addressed as well. The volume also covers the use of an electrochemical micromachining method to improve micro texturing and the use of nano-additives to enhance MQL and micromachining process optimization.
Download or read book Innovations in Mechanical Engineering written by G. S. V. L. Narasimham and published by Springer Nature. This book was released on 2022-03-02 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Innovations in Mechanical Engineering (ICIME 2021). It presents innovative ideas and new findings in the field of mechanical engineering. Various topics covered in this book are aerospace engineering, automobile engineering, thermal engineering, renewable energy sources, bio-mechanics, fluid mechanics, MEMS, mechatronics, robotics, CAD/CAM, CAE, CFD, design andoptimization, tribology, materials engineering and metallurgy, mimics, surface engineering, nanotechnology, polymer science, manufacturing, production management, industrial engineering and rapid prototyping. This book will be useful for the students, researchers and professionals working in the various areas of mechanical engineering.
Download or read book Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007 Micro and nano fluidics Micro and nano manufacturing Metrology and control Commercialization of micro and nano technology General written by and published by . This book was released on 2007 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007 Micro and nano systems Micro and nano devices Micro and nano mechanics Energy and micro and nano scale heat transfer written by and published by . This book was released on 2007 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Composite Hybrid and Multifunctional Materials Volume 5 written by Piyush R. Thakre and published by Springer. This book was released on 2018-10-15 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 5 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Recycled Constituent Composites Nanocomposites Mechanics of Composites Fracture & Fatigue of Composites Multifunctional Materials Damage Detection & Non-destructive Evaluation Composites for Wind Energy & Aerospace Applications Computed Tomography of Composites Manufacturing & Joining of Composites Novel Developments in Composites
Download or read book Analysis Design and Fabrication of Micromixers written by Kwang-Yong Kim and published by Mdpi AG. This book was released on 2021-09-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes an editorial and 12 research papers on micromixers collected from the Special Issue published in Micromachines. The topics of the papers are focused on the design of micromixers, their fabrication, and their analysis. Some of them proposed novel micromixer designs. Most of them deal with passive micromixers, but two papers report studies on electrokinetic micromixers. Fully three-dimensional (3D) micromixers were investigated in some cases. One of the papers applied optimization techniques to the design of a 3D micromixer. A review paper is also included and reports a review of recently developed passive micromixers and a comparative analysis of 10 typical micromixers.
Download or read book Electrochemical Micromachining for Nanofabrication MEMS and Nanotechnology written by Bijoy Bhattacharyya and published by William Andrew. This book was released on 2015-04-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Micromachining for Nanofabrication, MEMS and Nanotechnology is the first book solely dedicated to electrochemical micromachining (EMM). It begins with fundamentals, techniques, processes, and conditions, continuing with in-depth discussions of mechanisms of material removal, including an empirical model on the material removal rate for EMM (supported by experimental validation). The book moves next to construction-related features of EMM setup suitable for industrial micromachining applications, varying types of EMM, and the latest developments in the improvement of EMM setup. Further, it covers power supply, roll of electrolyte, and other major factors influencing EMM processes, and reports research findings concerning the improvement of machining accuracy and efficiency. Finally, the book devotes a chapter to the design and development of micro-tools, one of the most vital components in EMM. - Covers the generation of micro features used for advanced engineering of materials for fabrication of MEMS, microsystems and other micro-engineering applications - Explores the trend of decreasing size of fabricated devices, reflected in coverage of generation of high-precision nano-features on metal and semiconductors utilizing SPM, STM, and AFM, and nanotechnology aspects of EMM - Describes nanofabrication utilizing anodic dissolutions for mass manufacturing by overcoming obstacles utilizing electrochemical microsystem technology (EMST) and electrochemical nanotechnology (ENT)
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book Spark Erosion Machining written by Neelesh Kumar Jain and published by CRC Press. This book was released on 2020-11-01 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gaps where limited resources are available on comprehensive coverage of spark erosion machining (SEM) based processes. It provides researchers and scholars a vast amount of information on recent research on the subject. It also serves as a resource of novel and specialized applications of spark erosion machining and its variants, for students and faculties involved with advanced machining processes. Some salient features of the book: Describes various important aspects of spark-erosion based processes including their derived and hybrid processes. Includes a broad scope of SEM applications from industrial, commercial, and scientific to aerospace, automobiles and biomedical domains. Covers a wide range of materials applications of SE-based processes to different exotic and difficult-to-machine materials, i.e. superalloys, composites, ceramics, shape memory alloys, etc. Provides details micro version of EDM and WEDM processes and their specialized applications.
Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Micro Electro Discharge Machining written by Irene Fassi and published by . This book was released on 2021-10-25 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro electrical discharge machining (micro-EDM) is a thermo-electric and contactless process most suited for micro-manufacturing and high-precision machining, especially when difficult-to-cut materials, such as super alloys, composites, and electro conductive ceramics, are processed. Many industrial domains exploit this technology to fabricate highly demanding components, such as high-aspect-ratio micro holes for fuel injectors, high-precision molds, and biomedical parts. Moreover, the continuous trend towards miniaturization and high precision functional components boosted the development of control strategies and optimization methodologies specifically suited to address the challenges in micro- and nano-scale fabrication. This Special Issue showcases 12 research papers and a review article focusing on novel methodological developments on several aspects of micro electrical discharge machining: machinability studies of hard materials (TiNi shape memory alloys, Si3N4-TiN ceramic composite, ZrB2-based ceramics reinforced with SiC fibers and whiskers, tungsten-cemented carbide, Ti-6Al-4V alloy, duplex stainless steel, and cubic boron nitride), process optimization adopting different dielectrics or electrodes, characterization of mechanical performance of processed surface, process analysis, and optimization via discharge pulse-type discrimination, hybrid processes, fabrication of molds for inflatable so���� microactuators, and implementation of low-cost desktop micro- EDM system.
Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.
