Download or read book Service Limit State Design and Analysis of Engineered Fills for Bridge Support written by Mahsa Khosrojerdi and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineered fills, including compacted granular fill and reinforced soil, are a cost-effective alternative to conventional bridge foundation systems. The Geosynthetic Reinforced Soil Integrated Bridge System (GRS-IBS) is a fast, sustainable and cost-effective method for bridge support. The in-service performance of this innovative bridge support system is largely evaluated through the vertical and lateral deformations of the GRS abutments and the settlements of reinforced soil foundations (RSF) during their service life. While it is a common assumption that granular or engineered fills do not exhibit secondary deformation, it has been observed in in-service bridge abutment applications and large-scale laboratory tests. Evaluation of the secondary, or post-construction, deformation of engineered fills is therefore also needed. The aim of this study is to analyze and quantify the maximum deformations of GRS abutment and RSF under service loads, evaluate the stress distributions within the engineered fills of the GRS abutment and RSF, and investigate the time-dependent behavior of engineered fills for bridge support. The ultimate goal is to provide accurate yet easy-to-use analysis-based design tools that can be used in the performance assessment of GRS abutments and RSF under service loads. It is anticipated that the research performed within the scope of this dissertation will eventually help promote sustainable and efficient design practice of these structures.The research objective was achieved through development of numerical models that employed finite difference solution scheme and simulated the performance of granular backfill and reinforcement material. The backfill soil was simulated using three different constitutive models. Comparison of the simulation results with case studies showed that the behavior of GRS structures under service loads is accurately predicted by the Plastic Hardening model. The developed models were validated through comparison of model predictions with laboratory and field test data reported in the literature. A comprehensive parametric study was conducted to evaluate the effects of backfill soils properties (friction angle and cohesion), reinforcement characteristics (stiffness, spacing, and length), and structure geometry (abutment height and facing batter and foundation width) on the deformations of GRS abutments and RSF. The results of the parametric study were used to conduct a nonlinear regression analysis to develop equations for predicting the maximum lateral deformation and settlement of GRS abutments and maximum settlement of RSF under service loads. The accuracy of the proposed prediction equations was evaluated based on the results of experimental case studies. The developed prediction equations may contribute to better understanding and enable simple calculations in designing these structures. To investigate the time-dependent deformations of GRS abutment and RSF, a numerical model was developed. The time-dependent deformations are also known as secondary deformations and creep. To model the creep behavior of the backfill material, the Burgers creep viscoplastic model that combines the Burgers model and the Mohr-Coulomb model was used in the simulations. To model the creep behavior of geosynthetics, the model proposed by Karpurapu and Bathurst (1995) was used; this model uses a hyperbolic load-strain function to calculate the stiffness of the reinforcement. Results indicated that engineered fills can exhibit noticeable secondary deformation.
Download or read book Synthesis and Evaluation of the Service Limit State Engineered Fills for Bridge Support written by M. Xiao and published by . This book was released on 2016 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering for Structural Stability in Bridge Construction written by Federal Highway Federal Highway Administration and published by . This book was released on 2020-07-19 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is intended to serve as a reference. It will provide technical information which will enable Manual users to perform the following activities:Describe typical erection practices for girder bridge superstructures and recognize critical construction stagesDiscuss typical practices for evaluating structural stability of girder bridge superstructures during early stages of erection and throughout bridge constructionExplain the basic concepts of stability and why it is important in bridge erection* Explain common techniques for performing advanced stability analysis along with their advantages and limitationsDescribe how differing construction sequences effect superstructure stabilityBe able to select appropriate loads, load combinations, and load factors for use in analyzing superstructure components during constructionBe able to analyze bridge members at various stages of erection* Develop erection plans that are safe and economical, and know what information is required and should be a part of those plansDescribe the differences between local, member and global (system) stability
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timber Bridges written by Michael A. Ritter and published by Datamotion Publishing LLC. This book was released on 1990 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Download or read book Development of a Probability Based Load Criterion for American National Standard A58 written by Bruce R. Ellingwood and published by . This book was released on 1980 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2011 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers guidance on bridge design for extreme events induced by human beings. This document provides the designer with information on the response of concrete bridge columns subjected to blast loads as well as blast-resistant design and detailing guidelines and analytical models of blast load distribution. The content of this guideline should be considered in situations where resisting blast loads is deemed warranted by the owner or designer.
Download or read book Design and Construction of Bridge Approaches written by Harvey E. Wahls and published by Transportation Research Board. This book was released on 1990 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes case histories of the Dumbarton Bridge (San Francisco Bay, Calif.), the Rainier Avenue Embankment (Seattle, Wash.) and the Gallows Road Grade Separation (Fairfax, Va.)
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Specifications for Highway Bridges written by Nihon Dōro Kyōkai and published by . This book was released on 2003-11-30 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book Canadian Journal of Civil Engineering written by and published by . This book was released on 2007 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drawdown written by Paul Hawken and published by Penguin. This book was released on 2017-04-18 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: • New York Times bestseller • The 100 most substantive solutions to reverse global warming, based on meticulous research by leading scientists and policymakers around the world “At this point in time, the Drawdown book is exactly what is needed; a credible, conservative solution-by-solution narrative that we can do it. Reading it is an effective inoculation against the widespread perception of doom that humanity cannot and will not solve the climate crisis. Reported by-effects include increased determination and a sense of grounded hope.” —Per Espen Stoknes, Author, What We Think About When We Try Not To Think About Global Warming “There’s been no real way for ordinary people to get an understanding of what they can do and what impact it can have. There remains no single, comprehensive, reliable compendium of carbon-reduction solutions across sectors. At least until now. . . . The public is hungry for this kind of practical wisdom.” —David Roberts, Vox “This is the ideal environmental sciences textbook—only it is too interesting and inspiring to be called a textbook.” —Peter Kareiva, Director of the Institute of the Environment and Sustainability, UCLA In the face of widespread fear and apathy, an international coalition of researchers, professionals, and scientists have come together to offer a set of realistic and bold solutions to climate change. One hundred techniques and practices are described here—some are well known; some you may have never heard of. They range from clean energy to educating girls in lower-income countries to land use practices that pull carbon out of the air. The solutions exist, are economically viable, and communities throughout the world are currently enacting them with skill and determination. If deployed collectively on a global scale over the next thirty years, they represent a credible path forward, not just to slow the earth’s warming but to reach drawdown, that point in time when greenhouse gases in the atmosphere peak and begin to decline. These measures promise cascading benefits to human health, security, prosperity, and well-being—giving us every reason to see this planetary crisis as an opportunity to create a just and livable world.
Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.
Download or read book Design Assessment Monitoring and Maintenance of Bridges and Infrastructure Networks written by Fabio Biondini and published by Routledge. This book was released on 2020-08-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Relevant advances have been accomplished by the scientific community and engineering profession in the design, assessment, monitoring, maintenance, and management of sustainable and resilient bridge structures and infrastructures. These advances have been presented and discussed at The Sixth International Conference on Bridge Maintenance, Safety And Management (IABMAS 2012), held in Stresa, Italy, from 8 to 11 July 2012 (http://www.iabmas2012.org). IABMAS 2012 has been organised on behalf of the International Association for Bridge Maintenance And Safety (IABMAS) under the auspices of Politecnico di Milano. This book collects the extended versions of selected papers presented at IABMAS 2012 and invited papers originally published in a Special Issue of Structure and Infrastructure Engineering. These papers provide significant contributions to the process of making more rational decisions in bridge design, assessment, monitoring and maintenance. The editors would like to thank the authors for their contributions and hope that this collection of papers will represent a valuable reference for scientific research and engineering applications in the fields of design, assessment, monitoring, and maintenance of bridges and infrastructure networks.
