Download or read book Sequencing Batch Reactor Technology written by Peter A. Wilderer and published by IWA Publishing. This book was released on 2001-03-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report highlights various types of SBRs, design considerations and procedures, equipment required, and experiences gained from practical applications. This report will help both designers and operators of SBRs understand how to use this technology successfully. The focus is on the application of fill-and-draw, variable volume, periodically operated, unsteady-state principles to activated sludge systems. Research findings are presented, from both the laboratory and pilot and full scale SBRs. Also included is a description of trends for technological developments and a discussion of open questions regarding research, development, application, and operation. Contents Introduction Fundamentals of Periodic Processes General Overview of SBR Applications Design of Activated Sludge SBR Plants Equipment and Instrumentation Practical Experiences Evaluation of SBR Facilities in Australia Evaluation of SBR Facilities in the USA and Canada Evaluation of SBR Facilities in Germany Evaluation of SBR Facilities in France Evaluation of SBR facilities in Japan Scientific and Technical Report No. 10

Download or read book Mechanism and Design of Sequencing Batch Reactors for Nutrient Removal written by Derin Orhon and published by IWA Publishing. This book was released on 2005-05-31 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sequencing batch reactor (SBR) is perhaps the most promising and viable of the proposed activated sludge modifications today for the removal of organic carbon and nutrients. In a relatively short period, it has become increasingly popular for the treatment of domestic and industrial wastewaters, as an effective biological treatment system due to its simplicity and flexibility of operation. Mechanism and Design of Sequencing Batch Reactors for Nutrient Removal has been prepared with the main objective to provide a unified design approach for SBR systems, primarily based on relevant process stoichiometry. Specific emphasis has been placed upon the fact that such a unified design approach is also by nature the determining factor for the selection of the most appropriate cyclic operation scheme, the sequence of necessary phases and filling patterns for the particular application. The proposed basis for design is developed and presented in a stepwise approach to cover both organic carbon and nutrient removal, domestic and industrial wastewaters, strong and specific wastes. The merits of model simulation as an integral complement of process design, along with performance evaluation of SBR models are also emphasized. Scientific and Technical Report No. 19

Download or read book Aerobic Granular Sludge written by S. Bathe and published by IWA Publishing. This book was released on 2005-03-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic Granular Sludge has recently received growing attention by researchers and technology developers, worldwide. Laboratory studies and preliminary field tests led to the conclusion that granular activated sludge can be readily established and profitably used in activated sludge plants, provided 'correct' process conditions are chosen. But what makes process conditions 'correct'? And what makes granules different from activated sludge flocs? Answers to these question are offered in Aerobic Granular Sludge. Major topics covered in this book include: Reasons and mechanism of aerobic granule formation Structure of the microbial population of aerobic granules Role, composition and physical properties of EPS Diffuse limitation and microbial activity within granules Physio-chemical characteristics Operation and application of granule reactors Scale-up aspects of granular sludge reactors, and case studies Aerobic Granular Sludge provides up-to-date information about a rapidly emerging new technology of biological treatment.

Download or read book Respirometry in Control of the Activated Sludge Process written by Henri Spanjers and published by IWA Publishing. This book was released on 1998-01-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ebook only (available soon) The report describes the principles of measurement of respiration rate, the transformation of measurement data into other types of information, and the application of the obtained information in process control strategies. Some fundamental concepts on biological respiration and process control are provided to assist the reader with understanding the principles. A structured overview comprises some eighty control strategies in which respirometry plays a role. To enable the reader to consult the information sources, an extensive literature list of over 500 references in included and classified into six themes. Contents Fundamentals of Respiration Measuring Principles Measured and Deduced Variables Elementary Control Concepts Respirometry in Control of the Activated Sludge Process Summary and Perspectives. Scientific and Technical Report No.7 Also Available Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies

Download or read book Handbook of Research on Resource Management for Pollution and Waste Treatment written by Affam, Augustine Chioma and published by IGI Global. This book was released on 2019-10-25 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is necessary to understand the extent of pollution in the environment in terms of the air, water, and soil in order for both humans and animals to live healthier lives. Poor waste treatment or pollution monitoring can lead to massive environmental issues, such as diminishing valuable resources, and cause a significant negative impact on society. Solutions, such as reuse of waste and sustainable waste management, must be explored to prevent these adverse effects. The Handbook of Research on Resource Management for Pollution and Waste Treatment is a collection of innovative research that examines waste and pollution treatment methods that can be adopted at local and international levels and examines appropriate resource management strategies for environmentally related issues. Featuring coverage on a wide range of topics such as soil washing, bioremediation, and runoff handling, this book is ideally designed for environmentalists, engineers, waste management professionals, natural resource regulators, environmental policymakers, scientists, academicians, researchers, and students seeking current research on viable resource management methods for the regeneration of their immediate environment.

Download or read book Sequencing Batch Reactor Technology II written by J-P. Delgenès and published by IWA Publishing (International Water Assoc). This book was released on 2001 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published as part of the 2001 subscription to Water Science & Technology, Volume 43, Number 3.

Download or read book Benchmarking Water Services written by Enrique Cabrera Jr and published by IWA Publishing. This book was released on 2011-03-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Benchmarking has become a key tool in the water industry to promote and achieve performance targets for utilities. The use of this tool for performance improvement through systematic search and adaptation of leading practices, has expanded globally during the past decade. Many ongoing projects worldwide aim to address different needs and objectives, in varying contexts, with outstanding results and impact. Benchmarking Water Services provides valuable information to everyone interested in benchmarking in the water industry. The text is aimed at utilities considering joining a benchmarking project, experienced practitioners in charge of organizing a benchmarking exercise, consultants, regulators and researchers. The document is presented with a clear practice oriented approach and can be used as a how-to-benchmark guide presented from different perspectives (participants, organizers, supervising bodies). Readers will gain practical insight on real life benchmarking practices and will benefit from the experiences gained in some of the leading benchmarking projects of the water industry (including the IWA-WSAA benchmarking efforts, the European Benchmarking Co-operation and the several benchmarking projects carried out in Austria and Central Europe). The manual also presents the new IWA Benchmarking Framework, which aims to harmonize the terms used to describe benchmarking and performance indicators practices in the water industry, guaranteeing a more fluent and efficient communication. This Manual of Best Practice is edited by the IWA Specialist Group on Benchmarking and Performance Assessment, and co-published by AWWA and IWA Publishing. Praise for Benchmarking Water Services: "The continual trend of conceptual to specifics throughout the book provides for an educational experience each time the book is either casually perused or carefully studied." "The authors (Cabrera, Haskins and Fritiz) diligently pursue the focus of improvement." "Benchmarking Water Services is an in depth and practical ‘must have’ guide for any utility currently engaged in or planning to develop a benchmarking process" - Gregory M. Baird (2012) Benchmarking: An International Journal 19:2. More information about the book can be found on the Water Wiki in an article written by the author: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/TheNewIWABenchmarkingFramework A Spanish language version of this book is available as a free eBook: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/eBookTitlesfromIWAPublishingFreetoDownload-Volume2#HBenchmarkingParaServiciosdeAgua

Download or read book Microbial Community Analysis written by Thomas E. Cloete and published by IWA Publishing. This book was released on 1997-01-01 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbial Community Analysis surveys the vast amount of theoretical and practical knowledge on the design of biological treatment systems. It describes the different types of biological wastewater systems, the role of microbial diversity in these systems, and how this affects design and operation, methods for studying microbial community dynamics, and mathematical modelling of these systems. Contents Biological methods for the treatment of wastewaters Biodiversity and microbial interactions in the biodegradation of organic compounds Microbial population dynamics in biological wastewater treatment plants Molecular techniques for determining microbial community structures in activated sludge Principles in the modelling of biological wastewater treatment plants Practical considerations for the design of biological wastewater treatment systems Scientific and Technical Report No.5

Download or read book Wastewater Microbiology written by Gabriel Bitton and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater Microbiology focuses on microbial contaminants found in wastewater, methods of detection for these contaminants, and methods of cleansing water of microbial contamination. This classic reference has now been updated to focus more exclusively on issues particular to wastewater, with new information on fecal contamination and new molecular methods. The book features new methods to determine cell viability/activity in environmental samples; a new section on bacterial spores as indicators; new information covering disinfection byproducts, UV disinfection, and photoreactivation; and much more. A PowerPoint of figures from the book is available at ftp://ftp.wiley.com/public/sci_tech_med/wastewater_microbiology.

Download or read book Biological Wastewater Treatment Processes written by Davide Dionisi and published by CRC Press. This book was released on 2017-02-03 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the book is on how to use mass and heat balances to simulate and design biological wastewater treatment processes. All the main processes for biological wastewater treatment are covered viz. activated sludge processes for carbon and nitrogen removal, anaerobic digestion, sequencing batch reactors, and attached growth processes.

Download or read book Secondary Settling Tanks written by G. A. Ekama and published by International Water Assn. This book was released on 1997-01-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The secondary settling tank (SST) plays a major ro

Download or read book Biotreatment of Industrial Effluents written by Mukesh Doble and published by Elsevier. This book was released on 2005-04-07 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing government regulation of pollution, as well as willingness to levy punitive fines for transgressions, treatment of industrial waste is a important subject. This book is a single source of information on treatment procedures using biochemical means for all types of solid, liquid and gaseous contaminants generated by various chemical and allied industries. This book is intended for practicing environmental engineers and technologists from any industry as well as researchers and professors. The topics covered include the treatment of gaseous, liquid and solid waste from a large number of chemical and allied industries that include dye stuff, chemical, alcohol, food processing, pesticide, pharmaceuticals, paint etc. Information on aerobic and anaerobic reactors and modeling and simulation of waste treatment systems are also discussed.* Compares chemical and biochemical means of industrial waste treatment* Provides details of technology (i.e. reactors, operating conditions etc) with regard to the biochemistry aspects.* Can be used as a teaching aid for graduate courses and a reference material by practicing environmental scientists and engineers.* Researchers can extract synergy between treatment procedures and various effluents.

Download or read book Troubleshooting the Sequencing Batch Reactor written by Michael H. Gerardi and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practical guide on what to do right when biological influences cause a sequencing batch reactor to go wrong This richly illustrated, straightforward guide carries forth the legacy established by previous editions in the Wiley Wastewater Microbiology series by focusing attention on the mixed gathering of organisms cohabitating within a sequencing batching reactor (SBR), and the key roles their biology plays in this wastewater processing tank's function. With a clear, user-friendly presentation of complex subject matter, Troubleshooting the Sequence Batch Reactor first teaches plant operators how to differentiate the positive and expected organismal dynamics present in optimal SBR performance from the negative and damaging ones that create unhealthy sludge, and a stoppage in SBR operations. Next, Troubleshooting the Sequence Batch Reactor delivers all the tools necessary to get an SBR back on track and running safely. In this book you'll get: Short-course situations tested by the author for the past fifteen years Accessible material aimed at operators instead of design and consulting engineers Essential information for understanding biological conditions such as aerobic, anoxic, and anaerobic/fermentative at the treatment process Examination of the properties of protozoa (single-celled) and metazoa (multi-celled) organisms, and their significance in wastewater treatment Devoid of overwhelming scientific jargon, chemical equations, and kinetics, this book simplifies details to provide quick instruction for plant operators on how to make more informed day-to-day process control decisions, how to troubleshoot confidently when SBR conditions become compromised, and how to act decisively when the problem is ultimately identified.

Download or read book Process Design Manual for Nitrogen Control written by United States. Environmental Protection Agency. Office of Technology Transfer and published by . This book was released on 1975 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovative Wastewater Treatment Resource Recovery Technologies Impacts on Energy Economy and Environment written by Juan M. Lema and published by IWA Publishing. This book was released on 2017-06-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.

Download or read book Constructed Wetlands for Pollution Control written by Robert H. Kadlec and published by IWA Publishing. This book was released on 2000-03-31 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a comprehensive up-to-date survey of wetland design techniques and operational experience from treatment wetlands. This book is the first and only global synthesis of information related to constructed treatment wetlands. Types of constructed wetlands, major design parameters, role of vegetation, hydraulic patterns, loadings, treatment efficiency, construction, operation and maintenance costs are discussed in depth. History of the use of constructed wetlands and case studies from various parts of the world are included as well. Constructed Wetlands for Pollution Control will be indispensable for wastewater treatment researchers and designers, decision makers in public authorities, wetland engineers, environmentalists and landscape ecologists. Contents Biological methods for the treatment of wastewaters Types of constructed wetland Aplications of the technology Framework for interpreting and predicting water quality improvement Mechanisms and results for water quality improvement Design Plants and planting System start-up Economics Case studies Scientific and Technical Report No.8

Download or read book River Water Quality Model written by P. Reichert and published by IWA Publishing. This book was released on 2001-08-31 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Scientific and Technical Report (STR) presents the findings of the IWA Task Group on River Water Quality Modelling (RWQM). The task group was formed to create a scientific and technical base from which to formulate standardized, consistent river water quality models and guidelines for their implementation. This STR presents the first outcome in this effort: River Water Quality Model No. 1 (RWQM1). As background to the development of River Water Quality Model No.1, the Task Group completed a critical evaluation of the current state of the practice in water quality modelling. A major limitation in model formulation is the continued reliance on BOD as the primary state variable, despite the fact BOD does not include all biodegradable matter. A related difficulty is the poor representation of benthic flux terms. As a result of these limitations, it is impossible to close mass balances completely in most existing models. These various limitations in current river water quality models impair their predictive ability in situations of marked changes in a river's pollutant load, streamflow, morphometry, or other basic characteristics. RWQM 1 is intended to serve as a framework for river water quality models that overcome these deficiencies in traditional water quality models and most particularly the failure to close mass balances between the water column and sediment. To these ends, the model incorporates fundamental water quality components and processes to characterise carbon, oxygen, nitrogen, and phosphorus (C, O, N, and P) cycling instead of biochemical oxygen demand as used in traditional models. The model is presented in terms of process and components represented via a 'Petersen stoichiometry matrix', the same approach used for the IWA Activated Sludge Models. The full RWQM1 includes 24 components and 30 processes. The report provides detailed examples on reducing the numbers of components and processes to fit specific water quality problems. Thus, the model provides a framework for both complicated and simplified models. Detailed explanations of the model components, process equations, stoichiometric parameters, and kinetic parameters are provided, as are example parameter values and two case studies. The STR is intended to launch a participatory process of model development, application, and refinement. RWQM1 provides a framework for this process, but the goal of the Task Group is to involve water quality professionals worldwide in the continued work developing a new water quality modelling approach. This text will be an invaluable reference for researchers and graduate students specializing in water resources, hydrology, water quality, or environmental modelling in departments of environmental engineering, natural resources, civil engineering, chemical engineering, environmental sciences, and ecology. Water resources engineers, water quality engineers and technical specialists in environmental consultancy, government agencies or regulated industries will also value this critical assessment of the state of practice in water quality modelling. Key Features presents a unique new technical approach to river water quality modelling provides a detailed technical presentation of the RWQM1 water quality process model gives an informative critical evaluation of the state of the practice in water quality modelling, and problems with those practices provides a step by step procedure to develop a water quality model Scientific & Technical Report No. 12