Download or read book Sensors for Measurement and Control written by Peter Elgar and published by Prentice Hall. This book was released on 1998 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written as a complementary text to TecQuipment's sensors teaching package, but useful as a stand alone reference, Sensors for Measurment and Control describes the principles and applications of sensors used in engineering.
Download or read book Measuring Electronics and Sensors written by Herbert Bernstein and published by Springer Nature. This book was released on 2021-11-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an insight into today's operational measurement technology including analysis technology, without claiming to be complete. For the student, the book is an introduction in addition to the relevant textbooks and manuals. It gives the engineer in the profession a quick overview of measurement methods and instruments not familiar to him. In this book not only the components of measurement technology are presented transparently, but also the analog components that are necessary for the construction of measurement and control systems. The theoretical basics and the measuring methods are as much a part of the book as the description of systems, devices and measuring equipment. By indicating measuring ranges and error limits, additional reference points for the application are given, whereby the values mentioned are to be regarded as minimum values due to the constant technical development. This book is a translation of the original German 1st edition Messelektronik und Sensoren by Herbert Bernstein, published by Springer Fachmedien Wiesbaden GmbH, part of Springer Nature in 2014. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content, so that the book will read stylistically differently from a conventional translation. Springer Nature works continuously to further the development of tools for the production of books and on the related technologies to support the authors.
Download or read book Measurement and Control Basics written by Thomas A. Hughes and published by . This book was released on 1988 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement Systems and Sensors Second Edition written by Waldemar Nawrocki and published by Artech House. This book was released on 2016-01-01 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated and expanded second edition is an authoritative resource on industrial measurement systems and sensors, with particular attention given to temperature, stress, pressure, acceleration, and liquid flow sensors. This edition includes new and expanded chapters on wireless measuring systems and measurement control and diagnostics systems in cars. Moreover, the book introduces new, cost-effective measurement technology utilizing www servers and LAN computer networks - a topic not covered in any other resource. Coverage of updated wireless measurement systems and wireless GSM/LTE interfacing make this book unique, providing in-depth, practical knowledge. Professionals learn how to connect an instrument to a computer or tablet while reducing the time for collecting and processing measurement data. This hands-on reference presents digital temperature sensors, demonstrating how to design a monitoring system with multipoint measurements. From computer-based measuring systems, electrical thermometers and pressure sensors, to conditioners, crate measuring systems, and virtual instruments, this comprehensive title offers engineers the details they need for their work in the field.
Download or read book Process Measurement and Control written by Roy E. Fraser and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an excellent text for students in automatic control systems and is a useful reference for those working in the industry. It focuses on the functions of process control for industrial applications: sensing (measuring) process variables, communicating the sensed data to a central analyzer, deciding on a tactic to adjust the process, and actual adjustment of the process. Design, operation, and maintenance procedures are described. Design procedures include the selection of hardware and software, as well as applications to improve production and reduce costs. Operational procedures include monitoring the presented and recorded data to confirm satisfactory process operation, monitoring the achievement of cost goals, and ensuring that backup equipment functions correctly. Maintenance procedures include calibration of equipment, monitoring the effects of the environment on the system, and repairing equipment.
Download or read book Expanding the Vision of Sensor Materials written by Committee on New Sensor Technologies: Materials and Applications and published by National Academies Press. This book was released on 1995-07-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in materials science and engineering have paved the way for the development of new and more capable sensors. Drawing upon case studies from manufacturing and structural monitoring and involving chemical and long wave-length infrared sensors, this book suggests an approach that frames the relevant technical issues in such a way as to expedite the consideration of new and novel sensor materials. It enables a multidisciplinary approach for identifying opportunities and making realistic assessments of technical risk and could be used to guide relevant research and development in sensor technologies.
Download or read book Measurement Instrumentation and Sensors Handbook Second Edition written by John G. Webster and published by CRC Press. This book was released on 2014-01-29 with total page 1641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Spatial, Mechanical, Thermal, and Radiation Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 96 existing chapters Covers instrumentation and measurement concepts, spatial and mechanical variables, displacement, acoustics, flow and spot velocity, radiation, wireless sensors and instrumentation, and control and human factors A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Spatial, Mechanical, Thermal, and Radiation Measurement provides readers with a greater understanding of advanced applications.
Download or read book Transducers in Measurement and Control written by P. H. Sydenham and published by . This book was released on 1980 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensors and Circuits written by Joseph J. Carr and published by Prentice Hall. This book was released on 1993 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive reference providing detailed treatment of sensors ranging from simple thermistors to strain gauges, electro-optics, and medical laboratory sensors. Practical application and interfacing to both analog and digital circuits are included. Covers the latest analog-to-digital converters for sensor interfacing to computers and interfacing sensors to the IBM-PC series computers. Also delivers a wealth of vital application examples. Intended for practical design of instrumentation devices. KEY FEATURES: - provides grounding, shielding, and interference reduction strategies. - includes in-depth coverage of noise and its effects on sensor signal processing. - covers DC power supply and excitation sources for sensors.
Download or read book Introduction to Instrumentation Sensors and Process Control written by William C. Dunn and published by Artech House Publishers. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This clear, easy-to-comprehend resource offers a state-of-art treatment of the instrumentation, sensors and process control used in modern manufacturing. The book covers a wide range of technologies and techniques, fully explaining important related terminology. You learn how to use microprocessors for both analog and digital process control, as well as signal conditioning. Additionally, you gain a thorough understanding of the various types of valves and actuators used for flow control.
Download or read book Measurement Instrumentation and Sensors Handbook written by John G. Webster and published by CRC Press. This book was released on 2018-09-03 with total page 2273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences; explains sensors and the associated hardware and software; and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Second Edition: Consists of 2 volumes Features contributions from 240+ field experts Contains 53 new chapters, plus updates to all 194 existing chapters Addresses different ways of making measurements for given variables Emphasizes modern intelligent instruments and techniques, human factors, modern display methods, instrument networks, and virtual instruments Explains modern wireless techniques, sensors, measurements, and applications A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition provides readers with a greater understanding of advanced applications.
Download or read book Instrumentation for Process Measurement and Control Third Editon written by Norman A. Anderson and published by CRC Press. This book was released on 1997-10-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perennially bestselling third edition of Norman A. Anderson's Instrumentation for Process Measurement and Control provides an outstanding and practical reference for both students and practitioners. It introduces the fields of process measurement and feedback control and bridges the gap between basic technology and more sophisticated systems. Keeping mathematics to a minimum, the material meets the needs of the instrumentation engineer or technician who must learn how equipment operates. I t covers pneumatic and electronic control systems, actuators and valves, control loop adjustment, combination control systems, and process computers and simulation
Download or read book Measurement Testing and Sensor Technology written by Horst Czichos and published by Springer. This book was released on 2018-04-12 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the principles, methods and techniques to characterize materials and technical systems. The book is organized with concise text-graphics compilations in three parts: The first part describes the fundamentals of measurement, testing and sensor technology, including a survey of sensor types for dimensional metrology, kinematics, dynamics, and temperature. It describes also microsensors and embedded sensors. The second part gives an overview of materials and explains the application of measurement, testing and sensor technology to characterize composition, microstructure, properties and performance of materials as well as deterioration mechanisms and reliability. The third part introduces the general systems theory for the characterization of technical systems, exemplified by mechatronic and tribological systems. It describes technical diagnostics for structural health monitoring and performance control.
Download or read book Measurement and Instrumentation written by Alan S Morris and published by Academic Press. This book was released on 2015-08-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement and Instrumentation: Theory and Application, Second Edition, introduces undergraduate engineering students to measurement principles and the range of sensors and instruments used for measuring physical variables. This updated edition provides new coverage of the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces, also featuring chapters on data acquisition and signal processing with LabVIEW from Dr. Reza Langari. Written clearly and comprehensively, this text provides students and recently graduated engineers with the knowledge and tools to design and build measurement systems for virtually any engineering application. Provides early coverage of measurement system design to facilitate a better framework for understanding the importance of studying measurement and instrumentation Covers the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces Includes significant material on data acquisition and signal processing with LabVIEW Extensive coverage of measurement uncertainty aids students’ ability to determine the accuracy of instruments and measurement systems
Download or read book Smart Sensors for Real Time Water Quality Monitoring written by Subhas C Mukhopadhyay and published by Springer Science & Business Media. This book was released on 2013-03-17 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are being utilized to increasing degrees in all forms of industry. Researchers and industrial practitioners in all fields seek to obtain a better understanding of appropriate processes so as to improve quality of service and efficiency. The quality of water is no exception, and the water industry is faced with a wide array of water quality issues being present world-wide. Thus, the need for sensors to tackle this diverse subject is paramount. The aim of this book is to combine, for the first time, international expertise in the area of water quality monitoring using smart sensors and systems in order that a better understanding of the challenges faced and solutions posed may be available to all in a single text.
Download or read book In Process Measurement and Control written by Stephan D. Murphy and published by CRC Press. This book was released on 2020-07-24 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to encompass in-process measurement and control holistically as opposed to dealing with the bits and pieces. It discusses various types of sensors and strategies for using the data derived from the sensors in a closed-loop feedback arrangement.
Download or read book Smart Sensors Measurements and Instrumentation written by Santhosh K V and published by Springer Nature. This book was released on 2021-05-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of Control Instrumentation and System Conference, (CISCON 2020) held at Manipal Institute of Technology, MAHE, Manipal. It examines a wide spectrum covering the latest trends in the fields of instrumentation, sensors and systems, and industrial automation and control. The topics covered include image and signal processing, robotics, renewable energy, power systems and power drives, performance attributes of MEMS, multi-sensor data fusion, machine learning, optimization techniques, process control, safety monitoring, safety critical control, supervisory control, system modeling and virtual instrumentation. The book is a valuable reference for researchers and professionals interested in sensors, adaptive control, automation and control and allied fields.
