Download or read book Sensors and GPS for Drones and Quadcopters written by Roland Büchi and published by BoD – Books on Demand. This book was released on 2021-12-21 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning, the development of quadcopters and drones has been strongly influenced by sensors in combination with microprocessors. These flight systems would not be feasible without sensors, because gyros, acceleration sensors and inertial measurement units, for example, are absolutely necessary to make them fly. These are used for axis control. Others, such as the electronic compass, the air pressure sensor or GPS, make control considerably easier for the pilot. Together with sophisticated software, additional sensors such as ultrasonic, infrared or cameras allow additional functions such as automated take-offs and landings, obstacle detection or object tracing. All these sensors and their physical principles are explained in this booklet and their use and possibilities in quadrocopters and drones are discussed.
Download or read book UAV Sensors for Environmental Monitoring written by Felipe Gonzalez Toro and published by MDPI. This book was released on 2018-03-05 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "UAV Sensors for Environmental Monitoring" that was published in Sensors
Download or read book UAV or Drones for Remote Sensing Applications written by Felipe Gonzalez Toro and published by MDPI. This book was released on 2018-11-23 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "UAV or Drones for Remote Sensing Applications" that was published in Sensors
Download or read book UAV Or Drones for Remote Sensing Applications in GPS GNSS Enabled and GPS GNSS Denied Environments written by Felipe Gonzalez Toro and published by Mdpi AG. This book was released on 2021-11-09 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of novel UAV systems and the use of UAV platforms integrated with robotic sensing and imaging techniques, as well as the development of processing workflows and the capacity of ultra-high temporal and spatial resolution data, have enabled a rapid uptake of UAVs and drones across several industries and application domains. This book provides a forum for high-quality peer-reviewed papers that broaden awareness and understanding of single- and multiple-UAV developments for remote sensing applications, and associated developments in sensor technology, data processing and communications, and UAV system design and sensing capabilities in GPS-enabled and, more broadly, Global Navigation Satellite System (GNSS)-enabled and GPS/GNSS-denied environments. Contributions include: UAV-based photogrammetry, laser scanning, multispectral imaging, hyperspectral imaging, and thermal imaging; UAV sensor applications; spatial ecology; pest detection; reef; forestry; volcanology; precision agriculture wildlife species tracking; search and rescue; target tracking; atmosphere monitoring; chemical, biological, and natural disaster phenomena; fire prevention, flood prevention; volcanic monitoring; pollution monitoring; microclimates; and land use; Wildlife and target detection and recognition from UAV imagery using deep learning and machine learning techniques; UAV-based change detection.
Download or read book Unmanned Aerial Remote Sensing written by David R. Green and published by CRC Press. This book was released on 2020-07-10 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned Aircraft Systems (UAS) are a rapidly evolving technology with an expanding array of diverse applications. In response to the continuing evolution of this technology, this book discusses unmanned aerial vehicles (UAVs) and similar systems, platforms and sensors, as well as exploring some of their environmental applications. It explains how they can be used for mapping, monitoring, and modeling a wide variety of different environmental aspects, and at the same time addresses some of the current constraints placed on realizing the potential use of the technology such as s flight duration and distance, safety, and the invasion of privacy etc. Features of the book: Provides necessary theoretical foundations for pertinent subject matter areas Introduces the role and value of UAVs for geographical data acquisition, and the ways to acquire and process the data Provides a synthesis of ongoing research and a focus on the use of technology for small-scale image and spatial data acquisition in an environmental context Written by experts of the technology who bring together UAS tools and resources for the environmental specialist Unmanned Aerial Remote Sensing: UAS for Environmental Applications is an excellent resource for any practitioner utilizing remote sensing and other geospatial technologies for environmental applications, such as conservation, research, and planning. Students and academics in information science, environment and natural resources, geosciences, and geography, will likewise find this comprehensive book a useful and informative resource.
Download or read book Drones written by Louise Spilsbury and published by Gareth Stevens Publishing LLLP. This book was released on 2016-07-15 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Is it a bird, a plane, or maybe even a drone flying overhead? This amazing book tackles the history of drone technology and where future development will take these exciting aircraft. Known mostly for its use in the military as surveillance equipment or even in combat, these pilotless flying machines are now used all over the world by ordinary people who love remote controlled vehicles. Today, drones of all shapes and sizes can achieve amazing things, even if its just taking photos or some video in someones backyard. This book investigates the complicated role drone technology plays in our modern lives, and what future development will mean for our privacy and safety.
Download or read book Drones as Cyber Physical Systems written by Jung-Sup Um and published by Springer. This book was released on 2019-01-31 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of using drones as a teaching tool to explore the fundamental principles, technology and applications of Cyber-Physical Systems (CPS). A short introduction sets CPS in the context of the 4th industrial revolution, and describes various CPS technologies including self-driving cars, commercial intelligent drones and mobile robots, in which artificial intelligence routinely supports smarter decision-making. The core of the book then focuses on commercially available drones, the only available system offering the advantage of cyber-physical bridging through 3D autonomous dynamic flying in classroom conditions. Chapters describe drone technology, including location sensors and imaging systems. CPS theory is explained through typical drone flying procedures and do-it-yourself (DIY) aerial photography in which communication between sensors, actuators and controllers occurs through cyber-physical bi-directional bridging. This book opens new possibilities in fostering 4th industrial revolution literacy, introducing relevant examples from readily available equipment, making core elements of cyber-physical bridging accessible. It is aimed primarily at those students who have an interest in CPS, drones and those from disciplines that are concerned with spatial information.
Download or read book UAV or Drones for Remote Sensing Applications written by Felipe Gonzalez Toro and published by MDPI. This book was released on 2018-11-23 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "UAV or Drones for Remote Sensing Applications" that was published in Sensors
Download or read book First International Conference on Sustainable Technologies for Computational Intelligence written by Ashish Kumar Luhach and published by Springer Nature. This book was released on 2019-11-01 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers high-quality papers presented at the First International Conference on Sustainable Technologies for Computational Intelligence (ICTSCI 2019), which was organized by Sri Balaji College of Engineering and Technology, Jaipur, Rajasthan, India, on March 29–30, 2019. It covers emerging topics in computational intelligence and effective strategies for its implementation in engineering applications.
Download or read book Basics of Unmanned Aerial Vehicles written by Garvit Pandya and published by Notion Press. This book was released on 2021-03-06 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hey, we all must have noticed a drone flying at an event or maybe some other application. ? Have you ever thought about how a Drone flies? ? What are all the types and sizes of Unmanned Aerial Vehicles? ? What are all the parts and applications of a Drone? Are you interested in getting knowledge of the above questions and more related to them? Get Ready! After reading this book, the next time you see a Drone you will see it from a whole different perspective.
Download or read book Algorithms for Unmanned Aerial Vehicle Navigation Systems Simplified Navigation Algorithms for Small Unmanned Aerial Vehicles written by Vladimir Larin and published by Outskirts Press. This book was released on 2019-04-19 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The algorithms presented in this book were designed to achieve an acceptable trade-off between contradictive requirements to the software of small UAV navigation systems: sufficient accuracy and reliability in order to perform required flight missions on the one hand, and acceptable cost and simplicity of this software on the other hand. The core of modern navigation systems is integrated Strapdown Inertial Navigation System (SINS) and GPS, so in this book, the SINS algorithms and the algorithms of sensor fusion are described primarily. Inertial sensors (rate gyros and accelerometers) used in SINS are manufactured on the basis of the MEMS-technology. That is why they possess poor accuracy and need to be corrected with other sensors (GPS, magnetometers, and barometric altimeters). It is necessary to take into account that flight missions of small UAVs are characterized by small flight distances, small flight times, small flight speeds, etc. These properties of small UAV flight missions and properties of MEMS-sensors create a practical background for simplification of the SINS algorithms, simultaneously preserving their accuracy at acceptable levels. The navigation algorithms for gyro-free SINS are also considered. Increasing reliability of the UAV navigation systems requires a solution of the problems of the detection of the faulty sensors. These algorithms are described. Some practical aspects of the operation of navigation systems such as initial alignment, sensors calibration, and laboratory, ground, and flight testing of integrated SINS for small UAVs are also presented. This book will be useful for a wide circle of researchers, engineers, and graduate students involved in modern UAV design and manufacturing.
Download or read book Navigating Digital Transformation in Management written by Richard Busulwa and published by Taylor & Francis. This book was released on 2022-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Navigating Digital Transformation in Management provides a thorough introduction to the implications of digital transformation for leaders and managers. The book clearly outlines what new or enhanced roles and activities digital transformation requires of them. The book takes a practical approach and shapes an actionable guide that students can take with them into their future careers as managers themselves. With core theoretical grounding, the book explains how the digital transformation imperative requires all organizations to continuously undertake digital business transformation to adapt to ongoing digital disruption and to effectively compete as digital businesses. The book discusses the critical roles managers need to play in establishing, facilitating, and accelerating the day-to-day activities required to build and continuously upgrade these capabilities. Drawing on cutting edge research, this textbook: Explains how digital technology advancements drive digital disruption and why digital business transformation and operating as a digital business are critical to organization survival Unpacks the different digital business capabilities required to effectively compete as a digital business Considers the new or digitally enhanced competencies required of leaders, managers, and their supporting professionals to effectively play their roles in digital transformation Discusses how leaders, managers, and their supporting professionals can keep up with digital technology advancements Unpacks key digital technology advancements, providing a plain language understanding of what they are, how they work, and their implications for organizations Enriched with pedagogical features to support understanding and reinforce learning, such as reflective questions, learning summaries, and case studies, and supported by a suite of instructor materials, this textbook is an ideal choice for teachers that want to enable their information systems, information technology, and digital business students to compete and thrive in the contemporary business environment.
Download or read book Make Drones written by David McGriffy and published by Maker Media, Inc.. This book was released on 2016-10-10 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make: Drones will help the widest possible audience understand how drones work by providing several DIY drone projects based on the world's most popular robot controller--the Arduino. The information imparted in this book will show Makers how to build better drones and be better drone pilots, and incidentally it will have applications in almost any robotics project. Why Arduino? Makers know Arduinos and their accessories, they are widely available and inexpensive, and there is strong community support. Open source flight-control code is available for Arduino, and flying is the hook that makes it exciting, even magical, for so many people. Arduino is not only a powerful board in its own right, but it's used as the controller of most inexpensive 3d printers, many desktop CNCs, and the majority of open source drone platforms.
Download or read book Drone Operator written by Alix Wood and published by The Rosen Publishing Group, Inc. This book was released on 1900-01-01 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drones are frequently associated with spies and the military, but the truth is that they are used for many other purposes--animal observation, disaster surveillance, and filmmaking, for example! As the uses for drones and need for skilled operators rises, this is a field that is proving itself to be increasingly challenging, exciting, and fun.
Download or read book Drones Various Applications written by Dragan Cvetković and published by BoD – Books on Demand. This book was released on 2024-02-07 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many believe that unmanned aerial vehicles or drones are a recent invention, unmanned flight has a rich history that goes all the way back to ancient times. The first systems that can be specified under the modern definition of unmanned aerial vehicles or drones include reconnaissance drones developed and deployed during the Cold War period. Today, such systems have evolved and can have different designs. In the last twenty years, many drones with different aerodynamic characteristics, flight endurance, methods and places of launch and acceptance, and even more diverse purposes have been developed. The achievements of modern science, technique, and technology, especially in the field of microelectronics and control systems, have made it possible to design and manufacture drones that are capable of performing controllable flight in a wide range of altitudes, speeds, and distances while performing complex and diverse tasks with almost the same efficiency as well as manned aircraft. This book provides a comprehensive overview of drone technology and applications with chapters on the detection and classification of drones, issues related to electric unmanned aerial vehicles, integrating drones into educational curricula, and the uses of different types of drones in various situations, among other topics.
Download or read book Advanced Technologies for Security Applications written by Claudio Palestini and published by Springer Nature. This book was released on 2020-06-26 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology has been the spark that ignited NATO’s interest and commitment to scientific advancement during its history. Since its creation, the Science for Peace and Security (SPS) Programme has been instrumental to NATO’s commitment to innovation, science and technological advancement. During the years, SPS has demonstrated a flexible and versatile approach to practical scientific cooperation, and has promoted knowledge-sharing, building capacity, and projected stability outside NATO territory. The priorities addressed by the SPS Programme are aligned with NATO’s strategic objectives, and aim to tackle emerging security challenges that require dynamic adaptation for the prevention and mitigation of risks. By addressing priorities such as advanced technologies, hybrid threats, and counter-terrorism, the Programme deals with new, contemporary challenges. On 17-18 September 2019, the SPS Programme gathered at the KU Leuven University a wide number of researchers from a selection of on-going and recently closed SPS projects in the field of security-related advanced technologies for a “Cluster Workshop on Advanced Technologies”. The workshop covered, in particular, the following scientific domains: communication systems, advanced materials, sensors and detectors, and unmanned and autonomous systems. This book provides an overview on how these projects have contributed to the development of new technologies and innovative solutions and recommendations for future actions in the NATO SPS programme.
Download or read book Getting Started with Drones written by Terry Kilby and published by Maker Media, Inc.. This book was released on 2015-10-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Want to make something that can fly? How about a flying robot? In this book, you'll learn how drones work, how to solve some of the engineering challenges a drone presents, and how to build your own--an autonomous quadcopter that you can build, customize, and fly. Your drone will be your eyes in the sky and in places where a human could never get to-much less fit!
