Download or read book Sensor Technologies for Civil Infrastructures Volume 1 written by Jerome P. Lynch and published by Elsevier. This book was released on 2014-04-26 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are used for civil infrastructure performance assessment and health monitoring, and have evolved significantly through developments in materials and methodologies. Sensor Technologies for Civil Infrastructure Volume I provides an overview of sensor hardware and its use in data collection. The first chapters provide an introduction to sensing for structural performance assessment and health monitoring, and an overview of commonly used sensors and their data acquisition systems. Further chapters address different types of sensor including piezoelectric transducers, fiber optic sensors, acoustic emission sensors, and electromagnetic sensors, and the use of these sensors for assessing and monitoring civil infrastructures. Developments in technologies applied to civil infrastructure performance assessment are also discussed, including radar technology, micro-electro-mechanical systems (MEMS) and nanotechnology. Sensor Technologies for Civil Infrastructure provides a standard reference for structural and civil engineers, electronics engineers, and academics with an interest in the field. Describes sensing hardware and data collection, covering a variety of sensors Examines fiber optic systems, acoustic emission, piezoelectric sensors, electromagnetic sensors, ultrasonic methods, and radar and millimeter wave technology Covers strain gauges, micro-electro-mechanical systems (MEMS), multifunctional materials and nanotechnology for sensing, and vision-based sensing and lasers

Download or read book Sensor Technologies for Civil Infrastructures Volume 2 written by Jerome P. Lynch and published by Elsevier. This book was released on 2014-05-19 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are used for civil infrastructure performance assessment and health monitoring, and have evolved significantly through developments in materials and methodologies. Sensor Technologies for Civil Infrastructure Volume II provides an overview of sensor data analysis and case studies in assessing and monitoring civil infrastructures. Part one focuses on sensor data interrogation and decision making, with chapters on data management technologies, data analysis, techniques for damage detection and structural damage detection. Part two is made up of case studies in assessing and monitoring specific structures such as bridges, towers, buildings, dams, tunnels, pipelines, and roads. Sensor Technologies for Civil Infrastructure provides a standard reference for structural and civil engineers, electronics engineers, and academics with an interest in the field. Provides an in-depth examination of sensor data management and analytical techniques for fault detection and localization, looking at prognosis and life-cycle assessment Includes case studies in assessing structures such as bridges, buildings, super-tall towers, dams, tunnels, wind turbines, railroad tracks, nuclear power plants, offshore structures, levees, and pipelines

Download or read book Sensor Technologies for Civil Infrastructures written by Ming L. Wang and published by Woodhead Publishing. This book was released on 2014-04-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are used for civil infrastructure performance assessment and health monitoring, and have evolved significantly through developments in materials and methodologies. Sensor Technologies for Civil Infrastructure is a two-volume set that provides an overview of sensor hardware and its use in data collection, analysis, and case studies in assessing and monitoring civil infrastructures. Volume I focuses on sensing hardware and data collection, covering a variety of sensors. The book examines fiber optic systems, acoustic emission, piezoelectric sensors, electromagnetic sensors, ultrasonic methods, and radar and millimeter wave technology. Its chapters cover strain gauges, micro-electro-mechanical systems (MEMS), multifunctional materials and nanotechnology for sensing, and vision-based sensing and lasers. Volume II concentrates on data analysis, with an in-depth examination of sensor data management and analytical techniques for fault detection and localization, looking at prognosis and life-cycle assessment. This volume features case studies in assessing structures such as bridges, buildings, super-tall towers, dams, tunnels, wind turbines, railroad tracks, nuclear power plants, offshore structures, levees, and pipelines. Sensor Technologies for Civil Infrastructure: Volumes I and II provide a standard reference for structural and civil engineers, electronics engineers and academics with an interest in the field. Volume 1 describes sensing hardware and data collection and covers a variety of sensors, including fiber optic systems, piezoelectric sensors, strain gauges, MEMS (micro-electro-mechanical systems), and lasers Volume 2 examines sensor data analysis and case studies, assessing structures such as bridges, buildings, dams, tunnels, and pipelines

Download or read book Sensor Technologies for Civil Infrastructures Volume 2 written by Ming Wang and published by . This book was released on 2014 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are used for civil infrastructure performance assessment and health monitoring, and have evolved significantly through developments in materials and methodologies. Sensor Technologies for Civil Infrastructure Volume II provides an overview of sensor data analysis and case studies in assessing and monitoring civil infrastructures. Part one focuses on sensor data interrogation and decision making, with chapters on data management technologies, data analysis, techniques for damage detection and structural damage detection. Part two is made up of case studies in assessing and monitoring specific structures such as bridges, towers, buildings, dams, tunnels, pipelines, and roads. Sensor Technologies for Civil Infrastructure provides a standard reference for structural and civil engineers, electronics engineers, and academics with an interest in the field. Provides an in-depth examination of sensor data management and analytical techniques for fault detection and localization, looking at prognosis and life-cycle assessment Includes case studies in assessing structures such as bridges, buildings, super-tall towers, dams, tunnels, wind turbines, railroad tracks, nuclear power plants, offshore structures, levees, and pipelines.

Download or read book Sensor Technologies for Civil Infrastructures written by Jerome Lynch and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor Technologies for Civil Infrastructure, Volume 1: Sensing Hardware and Data Collection Methods for Performance Assessment, Second Edition, provides an overview of sensor hardware and its use in data collection. --

Download or read book Sensor Technologies for Civil Infrastructures written by Jerome Peter Lynch and published by Woodhead Publishing is. This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Health Monitoring of Civil Infrastructure Systems written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2009-08-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring is an extremely important methodology in evaluating the ‘health’ of a structure by assessing the level of deterioration and remaining service life of civil infrastructure systems. This book reviews key developments in research, technologies and applications in this area of civil engineering. It discusses ways of obtaining and analysing data, sensor technologies and methods of sensing changes in structural performance characteristics. It also discusses data transmission and the application of both individual technologies and entire systems to bridges and buildings. With its distinguished editors and international team of contributors, Structural health monitoring of civil infrastructure systems is a valuable reference for students in civil and structural engineering programs as well as those studying sensors, data analysis and transmission at universities. It will also be an important source for practicing civil engineers and designers, engineers and researchers developing sensors, network systems and methods of data transmission and analysis, policy makers, inspectors and those responsible for the safety and service life of civil infrastructure. Reviews key developments in research, technologies and applications Discusses systems used to obtain and analyse data and sensor technologies Assesses methods of sensing changes in structural performance

Download or read book Sensing Issues in Civil Structural Health Monitoring written by Farhad Ansari and published by Springer Science & Business Media. This book was released on 2005-07-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil infrastructure systems are generally the most expensive assets in any country, and these systems are deteriorating at an alarming rate. In addition, these systems have a long service life in comparison to most other commercial products. As well, the introduction of intelligent materials and innovative design approaches in these systems is painfully slow due to heavy relianceon traditional construction and maintenance practices, and the conservative nature of design codes. Feedback on the "state of the health" of constructed systems is practically nonexistent. In the quest for lighter, stronger and corrosion-resistant structures, the replacement of ferrous materials by high-strength fibrous ones is being actively pursued in several countries around the world, both with respect to the design of new structures as well as for the rehabilitation and strengthening of existing ones. In North America, active research in the design of new highway bridges is focused on a number of specialty areas, including the replacement of steel reinforcing bars in concrete deck slabs by randomly distributed low-modulus fibers, and the replacement of steel prestressing cables for concrete components by tendons comprising super-strong fibers. Research is also being conducted on using FRPs to repair and strengthen existing structures.

Download or read book Sensor Technologies for Civil Infrastructures written by Jerome P. Lynch and published by Woodhead Publishing. This book was released on 2022-07-19 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor Technologies for Civil Infrastructure, Volume 1: Sensing Hardware and Data Collection Methods for Performance Assessment, Second Edition, provides an overview of sensor hardware and its use in data collection. The first chapters provide an introduction to sensing for structural performance assessment and health monitoring, and an overview of commonly used sensors and their data acquisition systems. Further chapters address different types of sensor including piezoelectric transducers, fiber optic sensors, acoustic emission sensors, and electromagnetic sensors, and the use of these sensors for assessing and monitoring civil infrastructures. The new edition now includes chapters on machine learning methods and reliability analysis for structural health monitoring. All chapters have been revised to include the latest advances in materials (such as piezoelectric and mechanoluminescent materials), technologies (such as LIDAR), and applications. Describes sensing hardware and data collection, covering a variety of sensors including LIDAR Examines fiber optic systems, acoustic emission, piezoelectric sensors, electromagnetic sensors, terahertz technologies, ultrasonic methods, and radar and millimeter wave technology Covers strain gauges, micro-electro-mechanical systems (MEMS), multifunctional materials and nanotechnology for sensing, and vision-based sensing and lasers Includes new chapters on machine learning methods and reliability analysis

Download or read book Sensing Issues in Civil Structural Health Monitoring written by Farhad Ansari and published by Springer Science & Business Media. This book was released on 2005-11-14 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil infrastructure systems are generally the most expensive assets in any country, and these systems are deteriorating at an alarming rate. In addition, these systems have a long service life in comparison to most other commercial products. As well, the introduction of intelligent materials and innovative design approaches in these systems is painfully slow due to heavy relianceon traditional construction and maintenance practices, and the conservative nature of design codes. Feedback on the "state of the health" of constructed systems is practically nonexistent. In the quest for lighter, stronger and corrosion-resistant structures, the replacement of ferrous materials by high-strength fibrous ones is being actively pursued in several countries around the world, both with respect to the design of new structures as well as for the rehabilitation and strengthening of existing ones. In North America, active research in the design of new highway bridges is focused on a number of specialty areas, including the replacement of steel reinforcing bars in concrete deck slabs by randomly distributed low-modulus fibers, and the replacement of steel prestressing cables for concrete components by tendons comprising super-strong fibers. Research is also being conducted on using FRPs to repair and strengthen existing structures.

Download or read book Structural Sensing Health Monitoring and Performance Evaluation written by D. Huston and published by CRC Press. This book was released on 2010-09-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring (SHM) uses one or more in situ sensing systems placed in or around a structure, providing real-time evaluation of its performance and ultimately preventing structural failure. Although most commonly used in civil engineering, such as in roads, bridges, and dams, SHM is now finding applications in other engineering envir

Download or read book Structural Health Monitoring Technologies and Next Generation Smart Composite Structures written by Jayantha Ananda Epaarachchi and published by CRC Press. This book was released on 2016-09-15 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increased use of composite materials in aerospace, energy, automobile, and civil infrastructure applications, concern over composite material failures has grown, creating a need for smart composite structures that are able to self-diagnose and self-heal. Structural Health Monitoring Technologies and Next-Generation Smart Composite Structures provides valuable insight into cutting-edge advances in SHM, smart materials, and smart structures. Comprised of chapters authored by leading researchers in their respective fields, this edited book showcases exciting developments in general embedded sensor technologies, general sensor technologies, sensor response interrogation and data communication, damage matrix formulation, damage mechanics and analysis, smart materials and structures, and SHM in aerospace applications. Each chapter makes a significant contribution to the prevention of structural failures by describing methods that increase safety and reduce maintenance costs in a variety of SHM applications.

Download or read book The Rise of Smart Cities written by Amir Alavi and published by Butterworth-Heinemann. This book was released on 2022-04-12 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rise of Smart Cities: Advanced Structural Sensing and Monitoring Systems provides engineers and researchers with a guide to the latest breakthroughs in the deployment of smart sensing and monitoring technologies. The book introduces readers to the latest innovations in the area of smart infrastructure-enabling technologies and howthey can be integrated into the planning and design of smart cities. With this book in hand, readers will find a valuable reference in terms of civil infrastructure health monitoring, advanced sensor network architectures, smart sensing materials, multifunctional material and structures, crowdsourced/social sensing, remote sensing and aerial sensing, and advanced computation in sensornetworks. Reviews the latest development in smart structural health monitoring (SHM) systems Introduces all major algorithms, with a focus on practical implementation Includes real-world applications and case studies Opens up a new horizon for robust structural sensing methods and their applications in smart cities

Download or read book Underground Sensing written by Sibel Pamukcu and published by Academic Press. This book was released on 2017-11-01 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Sensing: Monitoring and Hazard Detection for Environment and Infrastructure brings the target audience the technical and practical knowledge of existing technologies of subsurface sensing and monitoring based on a classification of their functionality. In addition, the book introduces emerging technologies and applications of sensing for environmental and geo-hazards in subsurface – focusing on sensing platforms that can enable fully distributed global measurements. Finally, users will find a comprehensive exploration of the future of underground sensing that can meet demands for preemptive and sustainable response to underground hazards. New concepts and paradigms based on passively powered and/or on-demand activated, embeddable sensor platforms are presented to bridge the gap between real-time monitoring and global measurements. Presents a one-stop-shop reference for underground sensing and monitoring needs that saves valuable research time Provides application cases for all technologies that are covered and described in detail Includes full, four color images of equipment and applications Designed to cover a wide variety of underground sensors, from agriculture to geohazards

Download or read book Structural Health Monitoring of Large Civil Engineering Structures written by Hua-Peng Chen and published by John Wiley & Sons. This book was released on 2018-01-29 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: A critical review of key developments and latest advances in Structural Health Monitoring technologies applied to civil engineering structures, covering all aspects required for practical application Structural Health Monitoring (SHM) provides the facilities for in-service monitoring of structural performance and damage assessment, and is a key element of condition based maintenance and damage prognosis. This comprehensive book brings readers up to date on the most important changes and advancements in the structural health monitoring technologies applied to civil engineering structures. It covers all aspects required for such monitoring in the field, including sensors and networks, data acquisition and processing, damage detection techniques and damage prognostics techniques. The book also includes a number of case studies showing how the techniques can be applied in the development of sustainable and resilient civil infrastructure systems. Structural Health Monitoring of Large Civil Engineering Structures offers in-depth chapter coverage of: Sensors and Sensing Technology for Structural Monitoring; Data Acquisition, Transmission, and Management; Structural Damage Identification Techniques; Modal Analysis of Civil Engineering Structures; Finite Element Model Updating; Vibration Based Damage Identification Methods; Model Based Damage Assessment Methods; Monitoring Based Reliability Analysis and Damage Prognosis; and Applications of SHM Strategies to Large Civil Structures. Presents state-of-the-art SHM technologies allowing asset managers to evaluate structural performance and make rational decisions Covers all aspects required for the practical application of SHM Includes case studies that show how the techniques can be applied in practice Structural Health Monitoring of Large Civil Engineering Structures is an ideal book for practicing civil engineers, academics and postgraduate students studying civil and structural engineering.

Download or read book Optical Phenomenology and Applications written by Masoud Ghandehari and published by Springer. This book was released on 2018-06-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to techniques and applications of optical methods for materials Characterization in civil and environmental engineering. Emphasizing chemical sensing and diagnostics, it is written for students and researchers studying the physical and chemical processes in manmade or natural materials. Optical Phenomenology and Applications - Health Monitoring for Infrastructure Materials and the Environment, describes the utility of optical-sensing technologies in applications that include monitoring of transport processes and reaction chemistries in materials of the infrastructure and the subsurface environment. Many of the applications reviewed will address long standing issues in infrastructure health monitoring such as the alkali silica reaction, the role of pH in materials degradation, and the remote and inset characterization of the subsurface environment. The remarkable growth in photonics has contributed immensely to transforming bench-top optical instruments to compact field deployable systems. This has also contributed to optical sensors for environmental sensing and infrastructure health monitoring. Application of optical waveguides and full field imaging for civil and environmental engineering application is introduced and chemical and physical recognition strategies are presented; this is followed by range of filed deployable applications. Emphasizing system robustness, and long-term durability, examples covered include in-situ monitoring of transport phenomena, imaging degradation chemistries, and remote sensing of the subsurface ground water.

Download or read book Fundamentals of Wireless Sensor Networks written by Waltenegus Dargie and published by John Wiley & Sons. This book was released on 2010-11-05 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors describe the fundamental concepts and practical aspects of wireless sensor networks. The book provides a comprehensive view to this rapidly evolving field, including its many novel applications, ranging from protecting civil infrastructure to pervasive health monitoring. Using detailed examples and illustrations, this book provides an inside track on the current state of the technology. The book is divided into three parts. In Part I, several node architectures, applications and operating systems are discussed. In Part II, the basic architectural frameworks, including the key building blocks required for constructing large-scale, energy-efficient sensor networks are presented. In Part III, the challenges and approaches pertaining to local and global management strategies are presented – this includes topics on power management, sensor node localization, time synchronization, and security. At the end of each chapter, the authors provide practical exercises to help students strengthen their grip on the subject. There are more than 200 exercises altogether. Key Features: Offers a comprehensive introduction to the theoretical and practical concepts pertaining to wireless sensor networks Explains the constraints and challenges of wireless sensor network design; and discusses the most promising solutions Provides an in-depth treatment of the most critical technologies for sensor network communications, power management, security, and programming Reviews the latest research results in sensor network design, and demonstrates how the individual components fit together to build complex sensing systems for a variety of application scenarios Includes an accompanying website containing solutions to exercises (http://www.wiley.com/go/dargie_fundamentals) This book serves as an introductory text to the field of wireless sensor networks at both graduate and advanced undergraduate level, but it will also appeal to researchers and practitioners wishing to learn about sensor network technologies and their application areas, including environmental monitoring, protection of civil infrastructure, health care, precision agriculture, traffic control, and homeland security.