Download or read book Sensitivity of Simulated Anisotropy to Initial Texture Definitions written by and published by . This book was released on 1999 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free compression tests were performed on 0.040 inch thick 5754 aluminum sheet stock producing a slight in-plane anisotropy. A visco-plastic self-consistent (VPSC) deformation modeling code was used to model the mechanical properties and resultant deformation textures. Calculations using a discretized description of the initial texture simulated the deformation texture very closely. Simulation of the mechanical properties were also captured nicely with one exception. The direction of simulated in-plane anisotropy was reversed from the experimental results. Simulation of the impact of various texture components on the anisotropy indicted that the shift of texture toward stronger brass, {l_brace}110{r_brace}112, and Goss, {l_brace}110{r_brace}001, components led to the reversal of anisotropy. The simulated deformation texture was more intense than the experimental texture in the brass and Goss positions. This result suggests that the more intense simulated texture components may be responsible for the reversal of an isotropy.
Download or read book Microstructure Sensitive Design for Performance Optimization written by Brent L. Adams and published by Butterworth-Heinemann. This book was released on 2012-09-25 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accelerating rate at which new materials are appearing, and transforming the engineering world, only serves to emphasize the vast potential for novel material structure and related performance. Microstructure Sensitive Design for Performance Optimization (MSDPO) embodies a new methodology for systematic design of material microstructure to meet the requirements of design in optimal ways. Intended for materials engineers and researchers in industry, government and academia as well as upper level undergraduate and graduate students studying material science and engineering, MSDPO provides a novel mathematical framework that facilitates a rigorous consideration of the material microstructure as a continuous design variable in the field of engineering design. Presents new methods and techniques for analysis and optimum design of materials at the microstructure level Authors' methodology introduces spectral approaches not available in previous texts, such as the incorporation of crystallographic orientation as a variable in the design of engineered components with targeted elastic properties Numerous illustrations and examples throughout the text help readers grasp the concepts
Download or read book Approximation Methods for High Dimensional Simulation Results Parameter Sensitivity Analysis and Propagation of Variations for Process Chains written by Daniela Steffes-lai and published by Logos Verlag Berlin GmbH. This book was released on 2014 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work addresses the analysis of a sequential chain of processing steps, which is particularly important for the manufacture of robust product components. In each processing step, the material properties may have changed and distributions of related characteristics, for example, strains, may become inhomogeneous. For this reason, the history of the process including design-parameter uncertainties becomes relevant for subsequent processing steps. Therefore, we have developed a methodology, called PRO-CHAIN, which enables an efficient analysis, quantification, and propagation of uncertainties for complex process chains locally on the entire mesh. This innovative methodology has the objective to improve the overall forecast quality, specifically, in local regions of interest, while minimizing the computational effort of subsequent analysis steps. We have demonstrated the benefits and efficiency of the methodology proposed by means of real applications from the automotive industry.
Download or read book Texture and Anisotropy written by U. F. Kocks and published by Cambridge University Press. This book was released on 2000-08-15 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful book covering an important area of materials science, now available in paperback.
Download or read book The Virtual Fields Method written by Fabrice Pierron and published by Springer Science & Business Media. This book was released on 2012-03-21 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Virtual Fields Method: Extracting Constitutive Mechanical Parameters from Full-field Deformation Measurements is the first and only one on the Virtual Fields Method, a recent technique to identify materials mechanical properties from full-field measurements. It contains an extensive theoretical description of the method as well as numerous examples of application to a wide range of materials (composites, metals, welds, biomaterials etc.) and situations(static, vibration, high strain rate etc.). Finally, it contains a detailed training section with examples of progressive difficulty to lead the reader to program the VFM. This is accompanied with a set of commented Matlab programs as well as with a GUI Matlab based software for more general situations.
Download or read book Numerical Methods for Simulation of Industrial Metal Forming Processes written by American Society of Mechanical Engineers. Winter Annual Meeting and published by American Society of Civil Engineers. This book was released on 1992 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anisotropy and Localization of Plastic Deformation written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present developments in materials science, mechanics and engineering, as well as the demands of modern technology, result in a new and growing interest in plasticity and in bordering domains of the mechanical behavior of materials. This growing interest is attested to by the success of both The International Journal of Plasticity, which after its inception rapidly became the leading journal for plasticity research, and the series ofInternational Symposia on Plasticity and Its Current Applications, which is now the premier international forum for plasticity research dissemination. The First International Symposium on Plasticity and Its Current Applications was conceived and organized by Professor Akhtar S. Khan, and was held at the University of Oklahoma (Norman, Oklahoma, USA) from July 30 to August 3, 1984. It was attended by over one hundred scientists from fifteen countries. "Plasticity '89: the Second International Symposium on Plasticity and Its Current Applications" was held at Mie University (Tsu, Japan) from July 31 to August 4, 1989; this symposium was co-chaired by Professors Khan and Tokuda. The main emphasis of this meeting was on dynamic plasticity and micromechanics, although it included other aspects of plasticity as well. It was attended by over two hundred researchers from twenty-three nations.
Download or read book Texture and Anisotropy of Polycrystals II written by C. Esling and published by . This book was released on 2005 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural, as well as man-made, materials are often assumed to behave uniformly, exhibiting equal strength in all directions, because most of them have a polycrystalline structure. The anisotropy of the individual crystals, however, is smoothed out only in the presence of a large number of grains having a random distribution of orientations. In reality, there usually remains an anisotropy due to the existence of preferred orientations. Its magnitude depends upon the statistical distribution of grain orientations - the crystallographic texture or, more simply, the texture. -This governs the extremes, of the physical property of interest, which a single crystal of the material under consideration can exhibit in directional tests. Local variations in texture, as well as the arrangements and types of grain/phase boundaries, may give rise to inhomogeneous material properties. The texture also carries with it information on the history of a material's processing, use and misuse. A knowledge of the texture is a prerequisite for all quantitative techniques of materials characterization, and is based upon the interpretation of diffraction-peak intensities. It is also necessary to model the relationships between microstructural features and physical or mechanical properties. Therefore, the texture is of great value for quality control in a wide range of industrial applications, and in basic materials research.
Download or read book Magnesium Technology 2012 written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Essential Readings in Magnesium Technology written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of the best papers in the history of Magnesium Technology, a definitive annual reference in the field of magnesium production and related light metals technologies. The volume contains a strong topical mix of application and fundamental research articles on magnesium technology. Section titles: 1.Magnesium Technology History and Overview 2.Electrolytic and Thermal Primary Production 3.Melting, Refining, Recycling, and Life-Cycle Analysis 4.Casting and Solidification 5.Alloy and Microstructural Design 6.Wrought Processing 7.Modeling and Simulation 8.Joining 9.Corrosion, Surface Treatment, and Coating
Download or read book ICOTOM Eighth International Conference on Textures of Materials written by J. S. Kallend and published by . This book was released on 1988 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book NUMISHEET 2005 written by Lorenzo Marco Smith and published by . This book was released on 2005 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Material Processing Theory Methods and Application written by Ken-ichiro Mori and published by CRC Press. This book was released on 2001-01-01 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains about 180 papers including seven keynotes presented at the 7th NUMIFORM Conference. It reflects the state-of-the-art of simulation of industrial forming processes such as rolling, forging, sheet metal forming, injection moulding and casting.
Download or read book Applications of Texture Analysis written by A. D. Rollett and published by John Wiley & Sons. This book was released on 2008-12-05 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA. Chapters include: Thin Films Texture at Non-Ambient Conditions Novel Texture Measurement Techniques Including 3D Complex Oxides Interface Textures Recrystallization Texture Biomaterials Texture Effects on Damage Accumulation Digital Microstructures View information on Materials Processing and Texture: Ceramic Transactions, Volume 200.
Download or read book Magnesium Alloys 2003 written by Yutaka Kojima and published by . This book was released on 2003 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium alloys are among the most promising ecomaterials for various high-tech applications in the 21st Century. This 2-volume set comprises the proceedings of the 2nd International Conference on Platform Science and Technology for Advanced Magnesium Alloys (PSTAM 2003). The papers cover a wide spread of perspectives on the academic fundamentals, and industrial applications, of magnesium alloys.
Download or read book Handbook of Research on Advanced Computational Techniques for Simulation Based Engineering written by Samui, Pijush and published by IGI Global. This book was released on 2015-11-30 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in information processing systems have driven the advancement of computational methods in the engineering realm. New models and simulations enable better solutions for problem-solving and overall process improvement. The Handbook of Research on Advanced Computational Techniques for Simulation-Based Engineering is an authoritative reference work representing the latest scholarly research on the application of computational models to improve the quality of engineering design. Featuring extensive coverage on a range of topics from various engineering disciplines, including, but not limited to, soft computing methods, comparative studies, and hybrid approaches, this book is a comprehensive reference source for students, professional engineers, and researchers interested in the application of computational methods for engineering design.
