Download or read book Dynamics of Civil Structures Volume 4 written by Fikret Necati Catbas and published by Springer Science & Business Media. This book was released on 2014-04-15 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume of eight from the IMAC - XXXII Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Linear Systems Substructure Modelling Adaptive Structures Experimental Techniques Analytical Methods Damage Detection Damping of Materials & Members Modal Parameter Identification Modal Testing Methods System Identification Active Control Modal Parameter Estimation Processing Modal Data

Download or read book Engineering Mechanics written by Stein Sture and published by . This book was released on 1995 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2011 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers guidance on bridge design for extreme events induced by human beings. This document provides the designer with information on the response of concrete bridge columns subjected to blast loads as well as blast-resistant design and detailing guidelines and analytical models of blast load distribution. The content of this guideline should be considered in situations where resisting blast loads is deemed warranted by the owner or designer.

Download or read book Practical Lessons from the Loma Prieta Earthquake written by National Research Council and published by National Academies Press. This book was released on 1994-02-01 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Loma Prieta earthquake struck the San Francisco area on October 17, 1989, causing 63 deaths and $10 billion worth of damage. This book reviews existing research on the Loma Prieta quake and draws from it practical lessons that could be applied to other earthquake-prone areas of the country. The volume contains seven keynote papers presented at a symposium on the earthquake and includes an overview written by the committee offering recommendations to improve seismic safety and earthquake awareness in parts of the country susceptible to earthquakes.

Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.

Download or read book Hydraulics of Bridge Waterways written by Joseph N. Bradley and published by . This book was released on 1973 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges

Download or read book Concrete Box girder Bridges written by Jörg Schlaich and published by IABSE. This book was released on 1982 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1981 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High load Multi rotational Bridge Bearings written by John F. Stanton and published by Transportation Research Board. This book was released on 1999 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Induced Structural Pounding written by Robert Jankowski and published by Springer. This book was released on 2015-03-14 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books analyzes different approaches to modeling earthquake-induced structural pounding and shows the results of the studies on collisions between buildings and between bridge segments during ground motions. Aspects related to the mitigation of pounding effects as well as the design of structures prone to pounding are also discussed. Earthquake-induced structural pounding between insufficiently separated buildings, and between bridge segments, has been repeatedly observed during ground motions. The reports after earthquakes indicate that it may result in limited local damage in the case of moderate seismic events, or in considerable destruction or even the collapse of colliding structures during severe ground motions. Pounding in buildings is usually caused by the differences in dynamic properties between structures, which make them vibrate out-of-phase under seismic excitation. In contrast, in the case of longer bridge structures, it is more often the seismic wave propagation effect that induces collisions between superstructure segments during earthquakes.

Download or read book Track Design Handbook for Light Rail Transit written by and published by Transportation Research Board. This book was released on 2012 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: TCRP report 155 provides guidelines and descriptions for the design of various common types of light rail transit (LRT) track. The track structure types include ballasted track, direct fixation ("ballastless") track, and embedded track. The report considers the characteristics and interfaces of vehicle wheels and rail, tracks and wheel gauges, rail sections, alignments, speeds, and track moduli. The report includes chapters on vehicles, alignment, track structures, track components, special track work, aerial structures/bridges, corrosion control, noise and vibration, signals, traction power, and the integration of LRT track into urban streets.

Download or read book Bridge Engineering written by Weiwei Lin and published by Butterworth-Heinemann. This book was released on 2017-05-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Engineering: Classifications, Design Loading, and Analysis Methods begins with a clear and concise exposition of theory and practice of bridge engineering, design and planning, materials and construction, loads and load distribution, and deck systems. This is followed by chapters concerning applications for bridges, such as: Reinforced and Prestressed Concrete Bridges, Steel Bridges, Truss Bridges, Arch Bridges, Cable Stayed Bridges, Suspension Bridges, Bridge Piers, and Bridge Substructures. In addition, the book addresses issues commonly found in inspection, monitoring, repair, strengthening, and replacement of bridge structures. - Includes easy to understand explanations for bridge classifications, design loading, analysis methods, and construction - Provides an overview of international codes and standards - Covers structural features of different types of bridges, including beam bridges, arch bridges, truss bridges, suspension bridges, and cable-stayed bridges - Features step-by-step explanations of commonly used structural calculations along with worked out examples

Download or read book The Design of Modern Steel Bridges written by Sukhen Chatterjee and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges are great symbols of mankind’s conquest of space. They are a monument to his vision and determination, but these alone are not enough. An appreciation of the mathematical theories underlying bridge design is essential to resist the physical forces of nature and gravity. The object of this book is to explain firstly the nature of the problems associated with the building of bridges with steel as the basic material, and then the theories that are available to tackle them. The book covers: a technological history of the different types of iron and steel bridges the basic properties of steel loads on bridges from either natural or traffic-induced forces the process and aims of design based on limit state and statistical probability concepts buckling behaviour of various components and large-deflection behaviour of components with initial imperfections detailed guidance on the design of plate and box girder bridges together with some design examples The Second Edition includes a completely new chapter on the history and design of cable-stayed bridges, the various types of cable used for them and their method of construction, and it addresses many of the changes introduced in the latest version of the British Standard Design Code for steel bridges, BS 5400: Part 3:2000.

Download or read book Bridge Aesthetics Around the World written by and published by Transportation Research Board. This book was released on 1991 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the perspectives and insights of the world's present-day authorities on bridge aesthetics and design. Bridge engineers and architects representing 16 nations examine and highlight the aesthetic appearance of existing bridges with the goal of improving tomorrow's bridge design. Supplementing the individual papers is a comprehensive bibliography on bridge aesthetics, containing annotated references to more than 250 books, papers, and articles. There are 245 black-and-white photographs and numerous line drawings plus 24 pages of color plates. Author biographical information is provided and an index of bridges and locations is included. Individual entries into the TRIS data base have been made for the 22 papers and the bibliography.

Download or read book Timber Bridges written by Michael A. Ritter and published by . This book was released on 2005 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber's strength, light weight, and energy-absorbing properties furnish features desirable for bridge construction. Timber is capable of supporting short-term overloads without adverse effects. Contrary to popular belief, large wood members provide good fire resistance qualities that meet or exceed those of other materials in severe fire exposures. From an economic standpoint, wood is competitive with other materials on a first-cost basis and shows advantages when life cycle costs are compared. Timber bridges can be constructed in virtually any weather conditions, without detriment to the material. Wood is not damaged by continuous freezing and thawing and resists harmful effects of de-icing agents, which cause deterioration in other bridge materials. Timber bridges do not require special equipment for installation and can normally be constructed without highly skilled labor. They also present a natural and aesthetically pleasing appearance, particularly in natural surroundings. The misconception that wood provides a short service life has plagued timber as a construction material. Although wood is susceptible to decay or insect attack under specific conditions, it is inherently a very durable material when protected from moisture. Many covered bridges built during the 19th century have lasted over 100 years because they were protected from direct exposure to the elements. In modem applications, it is seldom practical or economical to cover bridges; however, the use of wood preservatives has extended the life of wood used in exposed bridge applications. Using modem application techniques and preservative chemicals, wood can now be effectively protected from deterioration for periods of 50 years or longer. In addition, wood treated with preservatives requires little maintenance and no painting. Another misconception about wood as a bridge material is that its use is limited to minor structures of no appreciable size. This belief is probably based on the fact that trees for commercial timber are limited in size and are normally harvested before they reach maximum size. Although tree diameter limits the size of sawn lumber, the advent of glued-laminated timber (glulam) some 40 years ago provided designers with several compensating alternatives. Glulam, which is the most widely used modem timber bridge material, is manufactured by bonding sawn lumber laminations together with waterproof structural adhesives. Thus, glulam members are virtually unlimited in depth, width, and length and can be manufactured in a wide range of shapes. Glulam provides higher design strengths than sawn lumber and provides better utilization of the available timber resource by permitting the manufacture of large wood structural elements from smaller lumber sizes. Technological advances in laminating over the past four decades have further increased the suitability and performance of wood for modern highway bridge applications.