Download or read book Comprehensive Semiconductor Science and Technology written by and published by Newnes. This book was released on 2011-01-28 with total page 3572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors are at the heart of modern living. Almost everything we do, be it work, travel, communication, or entertainment, all depend on some feature of semiconductor technology. Comprehensive Semiconductor Science and Technology, Six Volume Set captures the breadth of this important field, and presents it in a single source to the large audience who study, make, and exploit semiconductors. Previous attempts at this achievement have been abbreviated, and have omitted important topics. Written and Edited by a truly international team of experts, this work delivers an objective yet cohesive global review of the semiconductor world. The work is divided into three sections. The first section is concerned with the fundamental physics of semiconductors, showing how the electronic features and the lattice dynamics change drastically when systems vary from bulk to a low-dimensional structure and further to a nanometer size. Throughout this section there is an emphasis on the full understanding of the underlying physics. The second section deals largely with the transformation of the conceptual framework of solid state physics into devices and systems which require the growth of extremely high purity, nearly defect-free bulk and epitaxial materials. The last section is devoted to exploitation of the knowledge described in the previous sections to highlight the spectrum of devices we see all around us. Provides a comprehensive global picture of the semiconductor world Each of the work's three sections presents a complete description of one aspect of the whole Written and Edited by a truly international team of experts

Download or read book Fundamentals of Semiconductor Processing Technology written by Badih El-Kareh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive toward new semiconductor technologies is intricately related to market demands for cheaper, smaller, faster, and more reliable circuits with lower power consumption. The development of new processing tools and technologies is aimed at optimizing one or more of these requirements. This goal can, however, only be achieved by a concerted effort between scientists, engineers, technicians, and operators in research, development, and manufac turing. It is therefore important that experts in specific disciplines, such as device and circuit design, understand the principle, capabil ities, and limitations of tools and processing technologies. It is also important that those working on specific unit processes, such as lithography or hot processes, be familiar with other unit processes used to manufacture the product. Several excellent books have been published on the subject of process technologies. These texts, however, cover subjects in too much detail, or do not cover topics important to modem tech nologies. This book is written with the need for a "bridge" between different disciplines in mind. It is intended to present to engineers and scientists those parts of modem processing technologies that are of greatest importance to the design and manufacture of semi conductor circuits. The material is presented with sufficient detail to understand and analyze interactions between processing and other semiconductor disciplines, such as design of devices and cir cuits, their electrical parameters, reliability, and yield.

Download or read book Semiconductor Technologies in the Era of Electronics written by Yong Hoon Kang and published by Springer. This book was released on 2016-09-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological advances in the field of materials, devices, circuits, and systems began by the discovery of new properties of objects, or the entrepreneurship with the applications of unique or practical concepts for commercial goods. To implement products using these findings and challenges textbook knowledge is usually sufficient. Semiconductor Technologies in the Era of Electronics therefore does not aim to look deeper in certain areas but it offers a broad and comprehensive overview of the field to: - Experts of specific knowledge who want to expand the overall understanding to different areas - Persons who wish to understand the principle of electronic devices often seen in everyday life - Entrepreneurs interested in the innovations and changes of semiconductor technologies and overall electronics industry A profound and theoretical approach is therefore used and special cases essential to understanding these important concept are presented.

Download or read book Dry Etching Technology for Semiconductors written by Kazuo Nojiri and published by Springer. This book was released on 2014-10-25 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a must-have reference to dry etching technology for semiconductors, which will enable engineers to develop new etching processes for further miniaturization and integration of semiconductor integrated circuits. The author describes the device manufacturing flow, and explains in which part of the flow dry etching is actually used. The content is designed as a practical guide for engineers working at chip makers, equipment suppliers and materials suppliers, and university students studying plasma, focusing on the topics they need most, such as detailed etching processes for each material (Si, SiO2, Metal etc) used in semiconductor devices, etching equipment used in manufacturing fabs, explanation of why a particular plasma source and gas chemistry are used for the etching of each material, and how to develop etching processes. The latest, key technologies are also described, such as 3D IC Etching, Dual Damascene Etching, Low-k Etching, Hi-k/Metal Gate Etching, FinFET Etching, Double Patterning etc.

Download or read book Handbook of Semiconductor Technology Volume 2 written by Kenneth A. Jackson and published by Wiley-VCH. This book was released on 2000-08-15 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor technology is the basis of today's microelectronics industry with its many impacts on our modern life, i.e. computer and communication technology. This two-volume handbook covers the basics of semiconductor processing technology, which are as essential for the design of new microelectronic devices as the fundamental physics. Volume 1 'Electronic Structure and Properties' covers the structure and properties of semiconductors, with particular emphasis on concepts relevant to semiconductor technology. Volume 2 'Processing of Semiconductors' deals with the enabling materials technology for the electronics industry. World-renowned authors have contributed to this unique treatment of the processing of semiconductors and related technologies. Of interest to physicists and engineers in research and in the electronics industry, this is a valuable reference source and state-of-the-art review by the world's top authors.

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 3276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.

Download or read book Semiconductor Silicon Crystal Technology written by Fumio Shimura and published by Elsevier. This book was released on 2012-12-02 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Silicon Crystal Technology provides information pertinent to silicon, which is the dominant material in the semiconductor industry. This book discusses the technology of integrated circuits (ICs) in electronic materials manufacturer. Comprised of eight chapters, this book provides an overview of the basic science, silicon materials, IC device fabrication processes, and their interaction for enhancing both the processes and materials. This text then proceeds with a discussion of the atomic structure and bonding mechanisms in order to understand the nature and formation of crystal structures, which are the fundamentals of material science. Other chapters consider the technological crystallography and classify natural crystal morphologies based on observation. The final chapter deals with the interrelationships among silicon material characteristics, circuit design, and IC fabrication in order to ensure the fabrication of very-large-scale-integration/ultra-large-scale-integration circuits. This book is a valuable resource for graduate students, physicists, engineers, materials scientists, and professionals involved in semiconductor industry.

Download or read book Introduction to Semiconductor Manufacturing Technology written by Hong Xiao and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Semiconductor Manufacturing Technology, IC Fabrication Technology, and Devices: Conventional Flow. This up-to-date text on semiconductor manufacturing processes takes into consideration the rapid development of the industry's technology. It thoroughly describes the complicated and new IC chip fabrication processes in detail with minimum mathematics, physics, and chemistry. Advanced technologies are covered along with older ones to assist students in understanding the development processes from a historic point of view.

Download or read book Process Technology for Semiconductor Lasers written by Kenichi Iga and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of the design principles, seen mainly from the fabrication point of view. Following a review of the historical development and of the materials used in lasing at short to long wavelengths, the book goes on to discuss the basic design principles for semiconductor-laser devices and the epitaxy for laser production. One entire chapter is devoted to the technology of liquid-phase epitaxy, while another treats vapor-phase and beam epitaxies. The whole is rounded off with mode-control techniques and an introduction to surface-emitting lasers.

Download or read book Concepts in Spin Electronics written by Sadamichi Maekawa and published by Oxford University Press, USA. This book was released on 2006-01-26 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, a new branch of physics and nanotechnology called The aim of this book is tod, which aims at simultaneously present new directions in the development of spin electronics in both the basic physics and the technologywhich will become the foundation of future electronics.ich will become the foundation of future electronics.

Download or read book ULSI Semiconductor Technology Atlas written by Chih-Hang Tung and published by John Wiley & Sons. This book was released on 2003-10-06 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 1,100 TEM images illustrate the science of ULSI The natural outgrowth of VLSI (Very Large Scale Integration), Ultra Large Scale Integration (ULSI) refers to semiconductor chips with more than 10 million devices per chip. Written by three renowned pioneers in their field, ULSI Semiconductor Technology Atlas uses examples and TEM (Transmission Electron Microscopy) micrographs to explain and illustrate ULSI process technologies and their associated problems. The first book available on the subject to be illustrated using TEM images, ULSI Semiconductor Technology Atlas is logically divided into four parts: * Part I includes basic introductions to the ULSI process, device construction analysis, and TEM sample preparation * Part II focuses on key ULSI modules--ion implantation and defects, dielectrics and isolation structures, silicides/salicides, and metallization * Part III examines integrated devices, including complete planar DRAM, stacked cell DRAM, and trench cell DRAM, as well as SRAM as examples for process integration and development * Part IV emphasizes special applications, including TEM in advanced failure analysis, TEM in advanced packaging development and UBM (Under Bump Metallization) studies, and high-resolution TEM in microelectronics This innovative guide also provides engineers and managers in the microelectronics industry, as well as graduate students, with: * More than 1,100 TEM images to illustrate the science of ULSI * A historical introduction to the technology as well as coverage of the evolution of basic ULSI process problems and issues * Discussion of TEM in other advanced microelectronics devices and materials, such as flash memories, SOI, SiGe devices, MEMS, and CD-ROMs

Download or read book Guide To Semiconductor Engineering written by Jerzy Ruzyllo and published by World Scientific. This book was released on 2020-03-10 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Guide to Semiconductor Engineering is concerned with semiconductor materials, devices and process technologies which in combination constitute an enabling force behind the growth of our technical civilization. This book was conceived and written keeping in mind those who need to learn about semiconductors, who are professionally associated with select aspects of this technical domain and want to see it in a broader context, or for those who are simply interested in state-of-the-art semiconductor engineering. In its coverage of semiconductor properties, materials, devices, manufacturing technology, and characterization methods, this Guide departs from textbook-style, monothematic in-depth discussions of each topic. Instead, it considers the entire broad field of semiconductor technology and identifies synergistic interactions within various areas in one concise volume. It is a holistic approach to the coverage of semiconductor engineering which distinguishes this Guide among other books concerned with semiconductors related issues.

Download or read book Semiconductor Integrated Circuit Processing Technology written by W. R. Runyan and published by Addison Wesley Publishing Company. This book was released on 1990 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2000-08-09 with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Semiconductor Manufacturing Technology describes the individual processes and manufacturing control, support, and infrastructure technologies of silicon-based integrated-circuit manufacturing, many of which are also applicable for building devices on other semiconductor substrates. Discussing ion implantation, rapid thermal processing, photomask fabrication, chip testing, and plasma etching, the editors explore current and anticipated equipment, devices, materials, and practices of silicon-based manufacturing. The book includes a foreword by Jack S. Kilby, cowinner of the Nobel Prize in Physics 2000 "for his part in the invention of the integrated circuit."

Download or read book Semiconductor Detector Systems written by Helmuth Spieler and published by OUP Oxford. This book was released on 2005-08-25 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor sensors patterned at the micron scale combined with custom-designed integrated circuits have revolutionized semiconductor radiation detector systems. Designs covering many square meters with millions of signal channels are now commonplace in high-energy physics and the technology is finding its way into many other fields, ranging from astrophysics to experiments at synchrotron light sources and medical imaging. This book is the first to present a comprehensive discussion of the many facets of highly integrated semiconductor detector systems, covering sensors, signal processing, transistors and circuits, low-noise electronics, and radiation effects. The diversity of design approaches is illustrated in a chapter describing systems in high-energy physics, astronomy, and astrophysics. Finally a chapter "Why things don't work" discusses common pitfalls. Profusely illustrated, this book provides a unique reference in a key area of modern science.

Download or read book Semiconductor Nanomaterials for Flexible Technologies written by Yugang Sun and published by William Andrew. This book was released on 2010-05-20 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of the strategies to generate high-quality films of one-dimensional semiconductor nanostructures on flexible substrates (e.g., plastics) and the use of them as building blocks to fabricating flexible devices (including electronics, optoelectronics, sensors, power systems). In addition to engineering aspects, the physics and chemistry behind the fabrication and device operation will also be discussed as well. Internationally recognized scientists from academia, national laboratories, and industries, who are the leading researchers in the emerging areas, are contributing exceptional chapters according to their cutting-edge research results and expertise. This book will be an on-time addition to the literature in nanoscience and engineering. It will be suitable for graduate students and researchers as a useful reference to stimulate their research interest as well as facilitate their research in nanoscience and engineering. - Considers the physics and chemistry behind fabrication and device operation - Discusses applications to electronics, optoelectronics, sensors and power systems - Examines existing technologies and investigates emerging trends

Download or read book Tiger Technology written by John A. Mathews and published by Cambridge University Press. This book was released on 2000-01-27 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the dynamics of the semi-conductor industry in East Asia.