Download or read book Semiconductor Processing and Characterization with Lasers written by M. Briege and published by Trans Tech Publications Ltd. This book was released on 1994-09-08 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers are playing an increasingly important role in various fields of semiconductor and device technology. Of special significance is their contribution to the advanced technologies that are needed for economic solutions in photovoltaics. There, lasers are used in processing and characterization of photovoltaic materials, solar cells and module technology.
Download or read book Semiconductor Processing and Characterization with Lasers written by International Symposium on Semiconductor Processing and Characterization with Lasers and published by . This book was released on 1995 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Processing and Characterization with Lasers Applications in Photovoltaics written by M. Brieger and published by . This book was released on 1995 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers are playing an increasingly important role in various fields of semiconductor and device technology. Of special significance is their contribution to the advanced technologies that are needed for economic solutions in photovoltaics. There, lasers are used in processing and characterization of photovoltaic materials, solar cells and module technology.
Download or read book Nanomaterials written by S. C. Singh and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first in-depth treatment of the synthesis, processing, and characterization of nanomaterials using lasers, ranging from fundamentals to the latest research results, this handy reference is divided into two main sections. After introducing the concepts of lasers, nanomaterials, nanoarchitectures and laser-material interactions in the first three chapters, the book goes on to discuss the synthesis of various nanomaterials in vacuum, gas and liquids. The second half discusses various nanomaterial characterization techniques involving lasers, from Raman and photoluminescence spectroscopies to light dynamic scattering, laser spectroscopy and such unusual techniques as laser photo acoustic, fluorescence correlation spectroscopy, ultrafast dynamics and laser-induced thermal pulses. The specialist authors adopt a practical approach throughout, with an emphasis on experiments, set-up, and results. Each chapter begins with an introduction and is uniform in covering the basic approaches, experimental setups, and dependencies of the particular method on different parameters, providing sufficient theory and modeling to understand the principles behind the techniques.
Download or read book Process Technology for Semiconductor Lasers written by Kenichi Iga and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of the design principles, seen mainly from the fabrication point of view. Following a review of the historical development and of the materials used in lasing at short to long wavelengths, the book goes on to discuss the basic design principles for semiconductor-laser devices and the epitaxy for laser production. One entire chapter is devoted to the technology of liquid-phase epitaxy, while another treats vapor-phase and beam epitaxies. The whole is rounded off with mode-control techniques and an introduction to surface-emitting lasers.
Download or read book Characterization in Compound Semiconductor Processing written by Gary E. McGuire and published by Momentum Press. This book was released on 2010-01-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound semiconductors such as Gallium Arsenide, Gallium Aluminum Arsenide, and Indium Phosphide are often difficult to characterize and present a variety of challenges from substrate preparation, to epitaxial growth to dielectric film deposition to dopant introduction. This book reviews the common classes of compound semiconductors, their physical, optical and electrical properties and the various types of methods used for characterizing them when analyzing for defects and application problems. The book features: -- Characterization of III-V Thin Films for Electronic and Optical applications -- Characterization of Dielectric Insulating Film layers -- A Special case study on Deep Level Transient Spectroscopy on GaAs -- Concise summaries of major characterization technologies for compound semiconductor materials, including Auger Electron Spectroscopy, Ballistic Electron Emission Microscopy, Energy-Dispersive X-Ray Spectroscopy, Neutron Activation Analysis and Raman Spectroscopy
Download or read book Fabrication and Characterization of Edge emiting Semiconductor Lasers written by Junyeob Song and published by . This book was released on 2014 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The semiconductor laser was invented in 1962, and has recently become ubiquitous in modern life. This thesis focuses on the development of a semiconductor laser fabricating process which utilizes semiconductor manufacturing technology in a cleanroom environment including photolithography, etching, deposition, and bonding processes. A photomask for patterning is designed, recipes of photolithography process and etching process are developed with experiments. This work gives how to develop the process of fabrication and determine the parameters for each processes. A series of semiconductor laser devices are then fabricated using the developed process and characterization is performed to assess device performance with industrial standard methods. A fabricated device has 18W power and 11% conversion efficiency.
Download or read book Theory of Semiconductor Lasers written by Minoru Yamada and published by Springer. This book was released on 2014-04-10 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified and complete theory for semiconductor lasers, covering topics ranging from the principles of classical and quantum mechanics to highly advanced levels for readers who need to analyze the complicated operating characteristics generated in the real application of semiconductor lasers. The author conducts a theoretical analysis especially on the instabilities involved in the operation of semiconductor lasers. A density matrix into the theory for semiconductor lasers is introduced and the formulation of an improved rate equation to help understand the mode competition phenomena which cause the optical external feedback noise is thoroughly described from the basic quantum mechanics. The derivation of the improved rate equation will allow readers to extend the analysis for the different types of semiconductor materials and laser structures they deal with. This book is intended not only for students and academic researchers but also for engineers who develop lasers for the market, as the advanced topics covered are dedicated to real problems in implementing semiconductor lasers for practical use.
Download or read book Characterization in Silicon Processing written by Yale Strausser and published by Elsevier. This book was released on 2013-10-22 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the consideration of the use use of surface, thin film and interface characterization tools in support of silicon-based semiconductor processing. The approach taken is to consider each of the types of films used in silicon devices individually in its own chapter and to discuss typical problems seen throughout that films' history, including characterization tools which are most effectively used to clarifying and solving those problems.
Download or read book Laser Processing and Analysis of Materials written by Walter W. Duley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has often been said that the laser is a solution searching for a problem. The rapid development of laser technology over the past dozen years has led to the availability of reliable, industrially rated laser sources with a wide variety of output characteristics. This, in turn, has resulted in new laser applications as the laser becomes a familiar processing and analytical tool. The field of materials science, in particular, has become a fertile one for new laser applications. Laser annealing, alloying, cladding, and heat treating were all but unknown 10 years ago. Today, each is a separate, dynamic field of research activity with many of the early laboratory experiments resulting in the development of new industrial processing techniques using laser technology. Ten years ago, chemical processing was in its infancy awaiting, primarily, the development of reliable tunable laser sources. Now, with tunability over the entire spectrum from the vacuum ultraviolet to the far infrared, photo chemistry is undergoing revolutionary changes with several proven and many promising commercial laser processing operations as the result. The ability of laser sources to project a probing beam of light into remote or hostile environments has led to the development of a wide variety of new analytical techniques in environmental and laboratory analysis. Many of these are reviewed in this book.
Download or read book Characterization of GaAs Quantum Well Edge Emitting Semiconductor Lasers written by Isabelle A. Smith and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis will involve the details surrounding and describing the fabrication and characterization of GaAs laser diodes comprised of quantum well active regions. Within the scope of this thesis is a background to this realm of semiconductor technology, the processing tools that facilitate the fabrication, recipes for photolithography utilizing masks, and an explanation of results for the characterization methods and tests of device performance.
Download or read book Semiconductor Lasers written by Junji Ohtsubo and published by Springer. This book was released on 2017-05-03 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fascinating recent advances made concerning the chaos, stability and instability of semiconductor lasers, and discusses their applications and future prospects in detail. It emphasizes the dynamics in semiconductor lasers by optical and electronic feedback, optical injection, and injection current modulation. Applications of semiconductor laser chaos, control and noise, and semiconductor lasers are also demonstrated. Semiconductor lasers with new structures, such as vertical-cavity surface-emitting lasers and broad-area semiconductor lasers, are intriguing and promising devices. Current topics include fast physical number generation using chaotic semiconductor lasers for secure communication, development of chaos, quantum-dot semiconductor lasers and quantum-cascade semiconductor lasers, and vertical-cavity surface-emitting lasers. This fourth edition has been significantly expanded to reflect the latest developments. The fundamental theory of laser chaos and the chaotic dynamics in semiconductor lasers are discussed, but also for example the method of self-mixing interferometry in quantum-cascade lasers, which is indispensable in practical applications. Further, this edition covers chaos synchronization between two lasers and the application to secure optical communications. Another new topic is the consistency and synchronization property of many coupled semiconductor lasers in connection with the analogy of the dynamics between synaptic neurons and chaotic semiconductor lasers, which are compatible nonlinear dynamic elements. In particular, zero-lag synchronization between distant neurons plays a crucial role for information processing in the brain. Lastly, the book presents an application of the consistency and synchronization property in chaotic semiconductor lasers, namely a type of neuro-inspired information processing referred to as reservoir computing.
Download or read book Advanced Semiconductor Processing and Characterization of Electronic and Optical Materials written by Devendra K. Sadana and published by . This book was released on 1984 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Semiconductor Lasers for Optical Communications written by David J. Klotzkin and published by Springer Nature. This book was released on 2020-01-07 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated, second edition textbook provides a thorough and accessible treatment of semiconductor lasers from a design and engineering perspective. It includes both the physics of devices as well as the engineering, designing and testing of practical lasers. The material is presented clearly with many examples provided. Readers of the book will come to understand the finer aspects of the theory, design, fabrication and test of these devices and have an excellent background for further study of optoelectronics.
Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Laser Annealing Processes in Semiconductor Technology written by Fuccio Cristiano and published by Woodhead Publishing. This book was released on 2021-04-21 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Annealing Processes in Semiconductor Technology: Theory, Modeling and Applications in Nanoelectronics synthesizes the scientific and technological advances of laser annealing processes for current and emerging nanotechnologies. The book provides an overview of the laser-matter interactions of materials and recent advances in modeling of laser-related phenomena, with the bulk of the book focusing on current and emerging (beyond-CMOS) applications. Reviewed applications include laser annealing of CMOS, group IV semiconductors, superconducting materials, photonic materials, 2D materials. This comprehensive book is ideal for post-graduate students, new entrants, and experienced researchers in academia, research and development in materials science, physics and engineering. - Introduces the fundamentals of laser materials and device fabrication methods, including laser-matter interactions and laser-related phenomena - Addresses advances in physical modeling and in predictive simulations of laser annealing processes such as atomistic modeling and TCAD simulations - Reviews current and emerging applications of laser annealing processes such as CMOS technology and group IV semiconductors
Download or read book Packaging of High Power Semiconductor Lasers written by Xingsheng Liu and published by Springer. This book was released on 2014-07-14 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces high power semiconductor laser packaging design. The challenges of the design and various packaging and testing techniques are detailed by the authors. New technologies and current applications are described in detail.
