Download or read book Semiconductor Materials Analysis and Fabrication Processcontrol written by R. Stuck and published by . This book was released on 1993 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Materials Analysis and Fabrication Process Control written by G.M. Crean and published by Elsevier. This book was released on 2012-12-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing awareness that the successful implementation of novel material systems and technology steps in the fabrication of microelectronic and optoelectronic devices, is critically dependent on the understanding and control of the materials, the process steps and their interactions. The contributions in this volume demonstrate that characterisation and analysis techniques are an essential support mechanism for research in these fields. Current major research themes are reviewed both in the development and application of diagnostic techniques for advanced materials analysis and fabrication process control. Two distinct trends are elucidated: the emergence and evaluation of sophisticated in situ optical diagnostic techniques such as photoreflectance and spectroellipsometry and the industrial application of ultra-high sensitivity chemical analysis techniques for contamination monitoring. The volume will serve as a useful and timely overview of this increasingly important field.
Download or read book Semiconductor materials analysis and fabrication process control proceedings of Symposium D on Diagnostic Techniques for Semiconductor Materials Analysis and Fabrication Process Control of the 1992 E MRS Spring Conference Strasbourg France June 2 5 1992 written by G. M. Crean and published by . This book was released on 1993 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diagnostic Techniques for Semiconductor Materials Analysis and Fabrication Process Control written by G. M. Crean and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Materials Analysis and Fabrication Process Control written by G. M. Crean and published by North Holland. This book was released on 1993-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews current research in the development and application of diagnostic techniques for advanced materials analysis and fabrication process control. Contributions discuss the emergence and evaluation of in situ optical diagnostic techniques, such as photoreflectance and spectroellipsometry.
Download or read book Semiconductor Materials Analysis and Fabrication Process Control written by G. M Crean and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Engineering Analysis in Semiconductor Device Fabrication written by Stanley Middleman and published by McGraw-Hill Companies. This book was released on 1993 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written primarily for chemical engineering students, the material included in this new text is an extension of upper level chemical engineering courses. Covering a range of processes in semiconductor device fabrication, the authors try to present traditional chemical engineering methodology in a non-traditional context. The text covers such topics as crystal growth and filtration and contains over 300 worked examples and problems.
Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.
Download or read book Process Engineering Analysis in Semiconductor Device Fabrication written by Stanley Middleman and published by . This book was released on 1993-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This solutions manual accompanies a text which covers a range of processes in semiconductor device fabrication. The authors try to present traditional chemical engineering methodology in a non-traditional context. The text covers topics such as crystal growth and filtration.
Download or read book Methods of Measurement for Semiconductor Materials Process Control and Devices written by United States. National Bureau of Standards and published by . This book was released on 1968-10 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Chemicals and Gases for the Semiconductor Industry written by Ashutosh Misra and published by John Wiley & Sons. This book was released on 2002-03-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive guide to the chemicals and gases used in semiconductor manufacturing The fabrication of semiconductor devices involves a series of complex chemical processes such as photolithography, etching, cleaning, thin film deposition, and polishing. Until now, there has been no convenient source of information on the properties, applications, and health and safety considerations of the chemicals used in these processes. The Handbook of Chemicals and Gases for the Semiconductor Industry meets this need. Each of the Handbook's eight chapters is related to a specific area of semiconductor processing. The authors provide a brief overview of each step in the process, followed by tables containing physical properties, handling, safety, and other pertinent information on chemicals and gases typically used in these processes. The 270 chemical and gas entries include data on physical properties, emergency treatment procedures, waste disposal, and incompatible materials, as well as descriptions of applications, chemical mechanisms involved, and references to the literature. Appendices cross-reference entries by process, chemical name, and CAS number. The Handbook's eight chapters are: Thin Film Deposition Materials Wafer Cleaning Materials Photolithography Materials Wet and Dry Etching Materials Chemical Mechanical Planarizing Methods Carrier Gases Uncategorized Materials Semiconductor Chemicals Analysis No other single source brings together these useful and important data on chemicals and gases used in the manufacture of semiconductor devices. The Handbook of Chemicals and Gases for the Semiconductor Industry will be a valuable reference for process engineers, scientists, suppliers to the semiconductor industry, microelectronics researchers, and students.
Download or read book Microchip Fabrication 5th Ed written by Peter Van Zant and published by McGraw Hill Professional. This book was released on 2004-06-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The #1 book in the industry for more than 15 years! Utilizing a straightforward, math-free pathology, this is a novice-friendly guide to the semiconductor fabrication process from raw materials through shipping the finished, packaged device. Challenging quizzes and review summaries make this the perfect learning guide for technicians in training. * NEW chapter on nanotechnology * NEW sections on 300mm wafer processing * Processes and devices, and Green processing * Every chapter updated to reflect the latest processing techniques
Download or read book Methods of Measurement for Semiconductor Materials Process Control and Devices written by W. Murray Bullis and published by . This book was released on 1973 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Measurement for Semiconductor Materials Process Control and Devices written by W. Murray Bullis and published by . This book was released on 1972 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Microchips and Fabrication written by Yaguang Lian and published by John Wiley & Sons. This book was released on 2022-10-18 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Microchips and Fabrication Advanced and highly illustrated guide to semiconductor manufacturing from an experienced industry insider Semiconductor Microchips and Fabrication is a practical yet advanced book on the theory, design, and manufacturing of semiconductor microchips that describes the process using the principles of physics and chemistry, fills in the knowledge gaps for professionals and students who need to know how manufacturing equipment works, and provides valuable suggestions and solutions to many problems that students or engineers often encounter in semiconductor processing, including useful experiment results to help in process work. The explanation of the semiconductor manufacturing process, and the equipment needed, is carried out based on the machines that are used in clean rooms over the world so readers understand how they can use the equipment to achieve their design and manufacturing ambitions. Combining theory with practice, all descriptions are carried out around the actual equipment and processes by way of a highly visual text, with illustrations including equipment pictures, manufacturing process schematics, and structures of semiconductor microchips. Sample topics covered in Semiconductor Microchips and Fabrication include: An introduction to basic concepts, such as impedance mismatch from plasma machines and theories, such as energy bands and Clausius-Clapeyron equation Basic knowledge used in semiconductor devices and manufacturing machines, including DC and AC circuits, electric fields, magnetic fields, resonant cavity, and the components used in the devices and machines Transistor and integrated circuits, including bipolar transistors, junction field effect transistors, and metal-semiconductor field effect transistors The main processes used in the manufacturing of microchips, including lithography, metallization, reactive-ion etching (RIE), plasma-enhanced chemical vapor deposition (PECVD), thermal oxidation and implantation, and more The skills in the design and problem solving of processes, such as how to design a dry etching recipe, and how to solve the micro-grass problems in Bosch process Through Semiconductor Microchips and Fabrication, readers can obtain the fundamental knowledge and skills of semiconductor manufacturing, which will help them better understand and use semiconductor technology to improve their product quality or project research. Before approaching this text, readers should have basic knowledge of physics, chemistry, and circuitry.
Download or read book Run to Run Control in Semiconductor Manufacturing written by James Moyne and published by CRC Press. This book was released on 2018-10-08 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Run-to-run (R2R) control is cutting-edge technology that allows modification of a product recipe between machine "runs," thereby minimizing process drift, shift, and variability-and with them, costs. Its effectiveness has been demonstrated in a variety of processes, such as vapor phase epitaxy, lithography, and chemical mechanical planarization. The only barrier to the semiconductor industry's widespread adoption of this highly effective process control is a lack of understanding of the technology. Run to Run Control in Semiconductor Manufacturing overcomes that barrier by offering in-depth analyses of R2R control.
Download or read book Wafer Fabrication Factory Performance and Analysis written by Linda F. Atherton and published by Springer Science & Business Media. This book was released on 1995-11-30 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with wafer fabrication and the factories that manufacture microprocessors and other integrated circuits. With the invention of the transistor in 1947, the world as we knew it changed. The transistor led to the microprocessor, and the microprocessor, the guts of the modern computer, has created an epoch of virtually unlimited information processing. The electronics and computer revolution has brought about, for better or worse, a new way of life. This revolution could not have occurred without wafer fabrication, and its associated processing technologies. A microprocessor is fabricated via a lengthy, highly-complex sequence of chemical processes. The success of modern chip manufacturing is a miracle of technology and a tribute to the hundreds of engineers who have contributed to its development. This book will delineate the magnitude of the accomplishment, and present methods to analyze and predict the performance of the factories that make the chips. The set of topics covered juxtaposes several disciplines of engineering. A primary subject is the chemical engineering aspects of the electronics industry, an industry typically thought to be strictly an electrical engineer's playground. The book also delves into issues of manufacturing, operations performance, economics, and the dynamics of material movement, topics often considered the domain of industrial engineering and operations research. Hopefully, we have provided in this work a comprehensive treatment of both the technology and the factories of wafer fabrication. Novel features of these factories include long process flows and a dominance of processing over operational issues.
