Download or read book Semiconductor Devices BJTS JFETS MOSFETS and Integrated Circuits written by Rajendra P. Nanavati and published by . This book was released on 1975 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Devices and Integrated Electronics written by A. G. Milnes and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a need for a semiconductor device book that carries diode and transistor theory beyond an introductory level and yet has space to touch on a wider range of semiconductor device principles and applica tions. Such topics are covered in specialized monographs numbering many hun dreds, but the voluminous nature of this literature limits access for students. This book is the outcome of attempts to develop a broad course on devices and integrated electronics for university students at about senior-year level. The edu cational prerequisites are an introductory course in semiconductor junction and transistor concepts, and a course on analog and digital circuits that has intro duced the concepts of rectification, amplification, oscillators, modulation and logic and SWitching circuits. The book should also be of value to professional engineers and physicists because of both, the information included and the de tailed guide to the literature given by the references. The aim has been to bring some measure of order into the subject area examined and to provide a basic structure from which teachers may develop themes that are of most interest to students and themselves. Semiconductor devices and integrated circuits are reviewed and fundamental factors that control power levels, frequency, speed, size and cost are discussed. The text also briefly mentions how devices are used and presents circuits and comments on representative applications. Thus, the book seeks a balance be tween the extremes of device physics and circuit design.
Download or read book Semiconductor Devices 2nd Edition written by John Sparkes and published by CRC Press. This book was released on 1994-07-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception, the Tutorial Guides in Electronic Engineering series has met with great success among both instructors and students. Designed for first and second year undergraduate courses, each text provides a concise list of objectives at the beginning of every chapter, key definitions and formulas highlighted in margin notes, and references to other texts in the series. Semiconductor Devices begins with a review of the necessary basic background in semiconductor materials and what semiconductor devices are expected to do, that is, their typical applications. Then the author explains, in order of increasing complexity, the main semiconductor devices in use today, beginning with p-n junctions in their various forms and ending with integrated circuits. In doing so, he presents both the "band" model and the "bond" model of semiconductors, since neither one on its own can account for all device behavior. The final chapter introduces more recently developed technologies, particularly the use of compound instead of silicon semiconductors, and the improvement in device performance these materials make possible. True to the Tutorial Guides in Electronic Engineering series standards, Semiconductor Devices offers a clear presentation, a multitude of illustrations, and fully worked examples supported by end-of-chapter exercises and suggestions for further reading. This book provides an ideal introduction to the fundamental theoretical principles underlying the operation of semiconductor devices and to their simple and effective mathematical modelling.
Download or read book Semiconductor Devices written by James Fiore and published by . This book was released on 2017-05-11 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Across 15 chapters, Semiconductor Devices covers the theory and application of discrete semiconductor devices including various types of diodes, bipolar junction transistors, JFETs, MOSFETs and IGBTs. Applications include rectifying, clipping, clamping, switching, small signal amplifiers and followers, and class A, B and D power amplifiers. Focusing on practical aspects of analysis and design, interpretations of device data sheets are integrated throughout the chapters. Computer simulations of circuit responses are included as well. Each chapter features a set of learning objectives, numerous sample problems, and a variety of exercises designed to hone and test circuit design and analysis skills. A companion laboratory manual is available. This is the print version of the on-line OER.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2005-06-28 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of instrumentation is critical in light of the highly sensitive and precise requirements of modern processes and systems. Rapid development in instrumentation technology coupled with the adoption of new standards makes a firm, up-to-date foundation of knowledge more important than ever in most science and engineering fields. Understanding this, Robert B. Northrop produced the best-selling Introduction to Instrumentation and Measurements in 1997. The second edition continues to provide in-depth coverage of a wide array of modern instrumentation and measurement topics, updated to reflect advances in the field. See What's New in the Second Edition: Anderson Current Loop technology Design of optical polarimeters and their applications Photonic measurements with photomultipliers and channel-plate photon sensors Sensing of gas-phase analytes (electronic "noses") Using the Sagnac effect to measure vehicle angular velocity Micromachined, vibrating mass, and vibrating disk rate gyros Analysis of the Humphrey air jet gyro Micromachined IC accelerometers GPS and modifications made to improve accuracy Substance detection using photons Sections on dithering, delta-sigma ADCs, data acquisition cards, the USB, and virtual instruments and PXI systems Based on Northrop's 40 years of experience, Introduction to Instrumentation and Measurements, Second Edition is unequalled in its depth and breadth of coverage.
Download or read book Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation Second Edition written by Robert B. Northrop and published by CRC Press. This book was released on 2012-03-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation, Second Edition helps biomedical engineers understand the basic analog electronic circuits used for signal conditioning in biomedical instruments. It explains the function and design of signal conditioning systems using analog ICs—the circuits that enable ECG, EEG, EMG, ERG, tomographic images, biochemical spectrograms, and other crucial medical applications. This book demonstrates how op amps are the keystone of modern analog signal conditioning system design and illustrates how they can be used to build instrumentation amplifiers, active filters, and many other biomedical instrumentation systems and subsystems. It introduces the mathematical tools used to describe noise and its propagation through linear systems, and it looks at how signal-to-noise ratios can be improved by signal averaging and linear filtering. Features Analyzes the properties of photonic sensors and emitters and the circuits that power them Details the design of instrumentation amplifiers and medical isolation amplifiers Considers the modulation and demodulation of biomedical signals Examines analog power amplifiers, including power op amps and class D (switched) PAs Describes wireless patient monitoring, including Wi-Fi and Bluetooth communication protocols Explores RFID, GPS, and ultrasonic tags and the design of fractal antennas Addresses special analog electronic circuits and systems such as phase-sensitive rectifiers, phase detectors, and IC thermometers By explaining the "building blocks" of biomedical systems, the author illustrates the importance of signal conditioning systems in the devices that gather and monitor patients’ critical medical information. Fully revised and updated, this second edition includes new chapters, a glossary, and end-of-chapter problems. What’s New in This Edition Updated and revised material throughout the book A chapter on the applications, circuits, and characteristics of power amplifiers A chapter on wireless patient monitoring using UHF telemetry A chapter on RFID tags, GPS tags, and ultrasonic tags A glossary to help you decode the acronyms and terms used in biomedical electronics, physiology, and biochemistry New end-of-chapter problems and examples
Download or read book The Engineering Handbook written by Richard C. Dorf and published by CRC Press. This book was released on 2018-10-03 with total page 3080 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1995, The Engineering Handbook quickly became the definitive engineering reference. Although it remains a bestseller, the many advances realized in traditional engineering fields along with the emergence and rapid growth of fields such as biomedical engineering, computer engineering, and nanotechnology mean that the time has come to bring this standard-setting reference up to date. New in the Second Edition 19 completely new chapters addressing important topics in bioinstrumentation, control systems, nanotechnology, image and signal processing, electronics, environmental systems, structural systems 131 chapters fully revised and updated Expanded lists of engineering associations and societies The Engineering Handbook, Second Edition is designed to enlighten experts in areas outside their own specialties, to refresh the knowledge of mature practitioners, and to educate engineering novices. Whether you work in industry, government, or academia, this is simply the best, most useful engineering reference you can have in your personal, office, or institutional library.
Download or read book Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation written by Robert B. Northrop and published by CRC Press. This book was released on 2003-12-29 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic mathematical tools used to describe noise and its propagation through linear systems and provides a basic description of the improvement of signal-to-noise ratio by signal averaging and linear filtering. The text also demonstrates how op amps are the keystone of modern analog signal conditioning systems design, and il
Download or read book Introductory Semiconductor Device Physics written by Greg Parker and published by CRC Press. This book was released on 2004-09-30 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Semiconductor Device Physics is a popular and established text that offers a thorough introduction to the underlying physics of semiconductor devices. It begins with a review of basic solid state physics, then goes on to describe the properties of semiconductors including energy bands, the concept of effective mass, carrier concentr
Download or read book Electronic Devices and Circuits written by Franz Monssen and published by Prentice Hall. This book was released on 1996 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Sources and Voltage References written by Linden T. Harrison and published by Elsevier. This book was released on 2005-08-22 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Sources and Voltage References provides fixed, well-regulated levels of current or voltage within a circuit. These are two of the most important "building blocks " of analog circuits, and are typically used in creating most analog IC designs. Part 1 shows the reader how current sources are created, how they can be optimized, and how they can be utilized by the OEM circuit designer. The book serves as a "must-have reference for the successful development of precision circuit applications. It shows practical examples using either BJTs, FETs, precision op amps, or even matched CMOS arrays being used to create highly accurate current source designs, ranging from nanoAmps to Amps. In each chapter the most important characteristics of the particular semiconductor type being studied are carefully reviewed. This not only serves as a helpful refresher for experienced engineers, but also as a good foundation for all EE student coursework, and includes device models and relevant equations.Part 2 focuses on semiconductor voltage references, from their design to their various practical enhancements. It ranges from the simple Zener diode to today's most advanced topologies, including Analog Devices' XFET® and Intersil's FGATM (invented while this book was being written). Over 300 applications and circuit diagrams are shown throughout this easy-to-read, practical reference book.* Discusses how to design low-noise, precision current sources using matched transistor pairs.* Explains the design of high power current sources with power MOSFETs* Gives proven techniques to reduce drift and improve accuracy in voltage references.
Download or read book Computer Architecture and Interfacing to Mechatronic Systems written by Dario J. Toncich and published by Dario Toncich. This book was released on 1994 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Circuit Analysis with Multisim written by David Baez-Lopez and published by Springer Nature. This book was released on 2022-05-31 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with circuit simulation using National Instruments Multisim. It focuses on the use and comprehension of the working techniques for electrical and electronic circuit simulation. The first chapters are devoted to basic circuit analysis. It starts by describing in detail how to perform a DC analysis using only resistors and independent and controlled sources. Then, it introduces capacitors and inductors to make a transient analysis. In the case of transient analysis, it is possible to have an initial condition either in the capacitor voltage or in the inductor current, or both. Fourier analysis is discussed in the context of transient analysis. Next, we make a treatment of AC analysis to simulate the frequency response of a circuit. Then, we introduce diodes, transistors, and circuits composed by them and perform DC, transient, and AC analyses. The book ends with simulation of digital circuits. A practical approach is followed through the chapters, using step-by-step examples to introduce new Multisim circuit elements, tools, analyses, and virtual instruments for measurement. The examples are clearly commented and illustrated. The different tools available on Multisim are used when appropriate so readers learn which analyses are available to them. This is part of the learning outcomes that should result after each set of end-of-chapter exercises is worked out. Table of Contents: Introduction to Circuit Simulation / Resistive Circuits / Time Domain Analysis -- Transient Analysis / Frequency Domain Analysis -- AC Analysis / Semiconductor Devices / Digital Circuits
Download or read book Introduction to Semiconductor Device Modelling written by Christopher M. Snowden and published by World Scientific. This book was released on 1998 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals mainly with physical device models which are developed from the carrier transport physics and device geometry considerations. The text concentrates on silicon and gallium arsenide devices and includes models of silicon bipolar junction transistors, junction field effect transistors (JFETs), MESFETs, silicon and GaAs MESFETs, transferred electron devices, pn junction diodes and Schottky varactor diodes. The modelling techniques of more recent devices such as the heterojunction bipolar transistors (HBT) and the high electron mobility transistors are discussed. This book contains details of models for both equilibrium and non-equilibrium transport conditions. The modelling Technique of Small-scale devices is discussed and techniques applicable to submicron-dimensioned devices are included. A section on modern quantum transport analysis techniques is included. Details of essential numerical schemes are given and a variety of device models are used to illustrate the application of these techniques in various fields.
Download or read book A Top Down Constraint Driven Design Methodology for Analog Integrated Circuits written by Henry Chang and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design is often the bottleneck when designing mixed analog-digital systems. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits presents a new methodology based on a top-down, constraint-driven design paradigm that provides a solution to this problem. This methodology has two principal advantages: (1) it provides a high probability for the first silicon which meets all specifications, and (2) it shortens the design cycle. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits is part of an ongoing research effort at the University of California at Berkeley in the Electrical Engineering and Computer Sciences Department. Many faculty and students, past and present, are working on this design methodology and its supporting tools. The principal goals are: (1) developing the design methodology, (2) developing and applying new tools, and (3) `proving' the methodology by undertaking `industrial strength' design examples. The work presented here is neither a beginning nor an end in the development of a complete top-down, constraint-driven design methodology, but rather a step in its development. This work is divided into three parts. Chapter 2 presents the design methodology along with foundation material. Chapters 3-8 describe supporting concepts for the methodology, from behavioral simulation and modeling to circuit module generators. Finally, Chapters 9-11 illustrate the methodology in detail by presenting the entire design cycle through three large-scale examples. These include the design of a current source D/A converter, a Sigma-Delta A/D converter, and a video driver system. Chapter 12 presents conclusions and current research topics. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits will be of interest to analog and mixed-signal designers as well as CAD tool developers.
Download or read book Fundamentals of Electronics Book 1 Electronic Devices and Circuit Applications written by Thomas Schubert and published by I K International Pvt Ltd. This book was released on 2017-02-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Electronic Devices and Circuit Applications, is the first of four books of a larger work, Fundamentals of Electronics. It is comprised of four chapters describing the basic operation of each of the four fundamental building blocks of modern electronics: operational amplifiers, semiconductor diodes, bipolar junction transistors, and field effect transistors. Attention is focused on the reader obtaining a clear understanding of each of the devices when it is operated in equilibrium. Ideas fundamental to the study of electronic circuits are also developed in the book at a basic level to lessen the possibility of misunderstandings at a higher level. The difference between linear and non-linear operation is explored through the use of a variety of circuit examples including amplifiers constructed with operational amplifiers as the fundamental component and elementary digital logic gates constructed with various transistor types.
Download or read book The Circuits and Filters Handbook written by Wai-Kai Chen and published by CRC Press. This book was released on 2002-12-23 with total page 3076 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bestseller in its first edition, The Circuits and Filters Handbook has been thoroughly updated to provide the most current, most comprehensive information available in both the classical and emerging fields of circuits and filters, both analog and digital. This edition contains 29 new chapters, with significant additions in the areas of computer-
