Download or read book Semiconductor Defect Engineering Volume 994 written by S. Ashok and published by . This book was released on 2007-09-10 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners. This book, first published in 2007, focuses on the application of defects and impurities in current and emerging semiconductor technologies.
Download or read book Semiconductor Radiation Detectors written by Alan Owens and published by CRC Press. This book was released on 2019-05-31 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Choice Recommended Title, July 2020 Bringing together material scattered across many disciplines, Semiconductor Radiation Detectors provides readers with a consolidated source of information on the properties of a wide range of semiconductors; their growth, characterization and the fabrication of radiation sensors with emphasis on the X- and gamma-ray regimes. It explores the promise and limitations of both the traditional and new generation of semiconductors and discusses where the future in semiconductor development and radiation detection may lie. The purpose of this book is two-fold; firstly to serve as a text book for those new to the field of semiconductors and radiation detection and measurement, and secondly as a reference book for established researchers working in related disciplines within physics and engineering. Features: The only comprehensive book covering this topic Fully up-to-date with new developments in the field Provides a wide-ranging source of further reference material
Download or read book Photoconductivity and Photoconductive Materials 2 Volume Set written by Safa O. Kasap and published by John Wiley & Sons. This book was released on 2022-06-27 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore an authoritative resource with coverage of foundational concepts of photoconductivity and photoconductive materials In Photoconductivity and Photoconductive Materials, Professor Kasap delivers a definitive guide to the basic principles of photoconductivity and a selection of present topical photoconductive materials. Divided into two parts, the set begins with basic concepts and definitions and coverage of characterization using steady state, transient and modulated photoconductivity techniques, including the novel charge extraction by linearly increasing voltage (CELIV) method The physics of terahertz photoconductivity and fundamentals of organic semiconductors lsois are also covered. Part Two of the set starts with a comprehensive review of a wide range of photoconductive materials and then focuses on some of the most important photoconductors, including hydrogenated amorphous silicon, cadmium mercury telluride, various x-ray photoconductors, diamond films, metal halide perovskites, nanowires and quantum dots. Photoconductive antenna application is also included. Filled with contributions from leading authors in the field, this book also offers: A thorough introduction to the characterization of semiconductors from photoconductivity techniques, including uniform illumination and photocarrier grating techniques Comprehensive explorations of organic photoconductors, including photogeneration, transport, and applications in printing Practical discussions of time-of-flight transient photoconductivity, including experimental techniques and interpretation In-depth examinations of transient photoconductivity of organic semiconducting films and novel transient photoconductivity techniques Perfect for research physicists, materials scientists, and electrical engineers, Photoconductivity and Photoconductive Materials is also an indispensable resource for postgraduate and senior undergraduate students working in the area of optoelectronic materials, as well as researchers working in industry.
Download or read book Semiconductor Defect Engineering Volume 864 written by S. Ashok and published by Cambridge University Press. This book was released on 2005-07-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 2005, explores the deliberate introduction and manipulation of defects and impurities for the purpose of engineering desired properties in semiconductor materials and devices. The presentations are grouped around the distinct topics of materials, processing and devices. The papers on grown-in defects in bulk crystals deal with overviews of intrinsic and impurity-related defects and their influence on electrical, optical and mechanical properties, as well as the use of impurities to arrest certain types of defects during growth and defects to control growth. Most of the papers deal with dopant and defect issues relevant to widegap semiconductors. The scope of defect and impurity engineering is far-ranging, as exemplified by phase and morphological stability of silicides, interface control and passivation, and application of ion implantation, plasma treatment and rapid thermal processing for creating/activating/suppressing trap levels. Papers in these areas are also found in the book.
Download or read book Semiconductor Defect Engineering Volume 864 written by S. Ashok and published by Cambridge University Press. This book was released on 2014-06-05 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 2005, explores the deliberate introduction and manipulation of defects and impurities for the purpose of engineering desired properties in semiconductor materials and devices. The presentations are grouped around the distinct topics of materials, processing and devices. The papers on grown-in defects in bulk crystals deal with overviews of intrinsic and impurity-related defects and their influence on electrical, optical and mechanical properties, as well as the use of impurities to arrest certain types of defects during growth and defects to control growth. Most of the papers deal with dopant and defect issues relevant to widegap semiconductors. The scope of defect and impurity engineering is far-ranging, as exemplified by phase and morphological stability of silicides, interface control and passivation, and application of ion implantation, plasma treatment and rapid thermal processing for creating/activating/suppressing trap levels. Papers in these areas are also found in the book.
Download or read book Defect and Impurity Engineered Semiconductors and Devices III Volume 719 written by S. Ashok and published by . This book was released on 2002-08-09 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the deliberate introduction and manipulation of defects and impurities in order to engineer desired properties in semiconductor materials and devices. In view of current exciting developments in wide-bandgap semiconductors like GaN for blue light emission, as well as high-speed and high-temperature electronics, dopant and defect issues relevant to these materials are addressed. Also featured are semiconductor nanocavities and nano-structures, with emphasis on the formation and impact of vacancy-type defects. Defect reaction problems pertaining to impurity gettering, precipitation and hydrogen passivation are specific examples of defect engineering that improve the electronic quality of the material. A number of papers also deal with characterization techniques needed to study and to identify defects in materials and device structures. Finally, papers also address issues such as interface control and passivation, application of ion implantation, plasma treatment and rapid thermal processing for creating/activating/suppressing trap levels, and device applications.
Download or read book Materials Processes Integration and Reliability in Advanced Interconnects for Micro and Nanoelectronics Volume 990 written by Qinghuang Lin and published by . This book was released on 2007-09-12 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Defects and Properties of Semiconductors written by J. Chikawa and published by Springer. This book was released on 2014-01-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains nearly all of the papers presented at the Symposium on "Defects and Qualities of Semiconductors" which was held in Tokyo on May 17-18, 1984, under the sponsorship of the SOCIETY OF NON-TRADITIONAL TECHNOLOGY. The Symposium was organized by the promoting committee of the research project "Quality Developement of Semiconductors by Utilization of Crystal Defects" sponsored by the Science and Technology Agency of Japan. Defect study in semiconductor engineering started originally with seeking methods how to suppress generation of harmful defects during device processing in order to achieve a high yield of device fabrication. Recently, a new trend has appeared in which crystal defects are positively utilized to improve the device performance and reliability. A typical example is the intrinsic gettering technique for Czochralski silicon. Thus, a new term "DEFECT ENGINEERING" was born. It is becoming more important to control density and distribution of defects than to eliminate all the defects. Very precise and deep knowledge on defects is required to establish such techniques as generation and development of defects desired depending on type of devices and degree of integration. Electrical, optical and mechanical effects of defects should be also understood correctly. Such knowledge is essential even for eliminating defects from some specified device regions. It is the time now to investigate defect properties and defect kinetics in an energetic way. From this point of view, all the speakers in this symposium were invited among the most active investigators in the field of defect engineering in Japan.
Download or read book Gettering and Defect Engineering in Semiconductor Technology written by H. Richter and published by Trans Tech Publication. This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains 78 contributions to the important field of semiconductor defect control and defect engineering.
Download or read book Ion Beam Based Nanofabrication Volume 1020 written by Daryush Ila and published by . This book was released on 2007-09-05 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Thin Film Compound Semiconductor Photovoltaics 2007 Volume 1012 written by Timothy Gessert and published by . This book was released on 2007-11-14 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film compound semiconductor photovoltaic solar cells have demonstrated efficiencies of nearly 20% and are leading candidates to provide lower-cost energy due to potential advantages in manufacturing and materials costs. To fulfill the promise, a number of technical issues are being addressed, including a lack of fundamental understanding of these unique materials, devices and processes for large-area deposition. This book focuses on advances in the materials science, chemistry, processing and device issues of thin-film compound semiconductor materials that are used, or have potential use, in photovoltaic solar cells and related applications. Topics include: growth and performance of compound thin-film solar cells; novel materials and processes; defects and impurities; industrial perspectives; contacts and interfaces; grain boundaries and inhomogeneities; and structural, optical and electronic characterization.
Download or read book Organic Inorganic Hybrid Materials 2007 Volume 1007 written by Christophe Barbé and published by . This book was released on 2008-05-28 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic/inorganic hybrids has evolved significantly, providing materials with increasing architectural complexities and functionalities. Scientists involved in this field are gradually moving from building materials using a classical molecular approach (e.g. polymerization) to assembling materials on the nanoscale, using a variety of innovative strategies which can vary from the assembly of DNA motifs, to the formation of mesoporous materials by spinodal decomposition, or the use of nanoparticles or oxoclusters as nanobuilding blocks for building complex structures such as nacre-like transition metal oxides. This precise control over the materials architecture also adds functionality to the hybrid materials, whether it is for designing special membranes for phase separation and chromatography or thin films for photonic or magnetic applications. This book presents contributions from researchers worldwide and discusses organosiloxane-based materials; mesoporous materials and films; layered materials; surface and interface modification and characterization; controlled release and biological applications; nanoparticles synthesis and assembly; nanocomposites and new concepts.
Download or read book Defect Electronics in Semiconductors written by Herbert Franz Mataré and published by John Wiley & Sons. This book was released on 1971 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Field Effect Transistors written by Dharmendra Singh Yadav and published by CRC Press. This book was released on 2023-12-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Field-Effect Transistors: Theory and Applications offers a fresh perspective on the design and analysis of advanced field-effect transistor (FET) devices and their applications. The text emphasizes both fundamental and new paradigms that are essential for upcoming advancement in the field of transistors beyond complementary metal–oxide–semiconductors (CMOS). This book uses lucid, intuitive language to gradually increase the comprehension of readers about the key concepts of FETs, including their theory and applications. In order to improve readers’ learning opportunities, Advanced Field-Effect Transistors: Theory and Applications presents a wide range of crucial topics: Design and challenges in tunneling FETs Various modeling approaches for FETs Study of organic thin-film transistors Biosensing applications of FETs Implementation of memory and logic gates with FETs The advent of low-power semiconductor devices and related implications for upcoming technology nodes provide valuable insight into low-power devices and their applicability in wireless, biosensing, and circuit aspects. As a result, researchers are constantly looking for new semiconductor devices to meet consumer demand. This book gives more details about all aspects of the low-power technology, including ongoing and prospective circumstances with fundamentals of FET devices as well as sophisticated low-power applications.
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1994-11 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Semiconductor Science and Technology written by and published by Newnes. This book was released on 2011-01-28 with total page 3572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors are at the heart of modern living. Almost everything we do, be it work, travel, communication, or entertainment, all depend on some feature of semiconductor technology. Comprehensive Semiconductor Science and Technology, Six Volume Set captures the breadth of this important field, and presents it in a single source to the large audience who study, make, and exploit semiconductors. Previous attempts at this achievement have been abbreviated, and have omitted important topics. Written and Edited by a truly international team of experts, this work delivers an objective yet cohesive global review of the semiconductor world. The work is divided into three sections. The first section is concerned with the fundamental physics of semiconductors, showing how the electronic features and the lattice dynamics change drastically when systems vary from bulk to a low-dimensional structure and further to a nanometer size. Throughout this section there is an emphasis on the full understanding of the underlying physics. The second section deals largely with the transformation of the conceptual framework of solid state physics into devices and systems which require the growth of extremely high purity, nearly defect-free bulk and epitaxial materials. The last section is devoted to exploitation of the knowledge described in the previous sections to highlight the spectrum of devices we see all around us. Provides a comprehensive global picture of the semiconductor world Each of the work's three sections presents a complete description of one aspect of the whole Written and Edited by a truly international team of experts
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1994 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
