Download or read book Properties of Semiconductor Alloys written by Sadao Adachi and published by John Wiley & Sons. This book was released on 2009-03-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to provide a comprehensive treatment of the materials aspects of group-IV, III−V and II−VI semiconductor alloys used in various electronic and optoelectronic devices. The topics covered in this book include the structural, thermal, mechanical, lattice vibronic, electronic, optical and carrier transport properties of such semiconductor alloys. The book reviews not only commonly known alloys (SiGe, AlGaAs, GaInPAs, and ZnCdTe) but also new alloys, such as dilute-carbon alloys (CSiGe, CSiSn, etc.), III−N alloys, dilute-nitride alloys (GaNAs and GaInNAs) and Mg- or Be-based II−VI semiconductor alloys. Finally there is an extensive bibliography included for those who wish to find additional information as well as tabulated values and graphical information on the properties of semiconductor alloys.
Download or read book Semiconductor Alloys written by An-Ben Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first comprehensive treatment of these technologically important materials, the authors provide theories linking the properties of semiconductor alloys to their constituent compounds. Topics include crystal structures, bonding, elastic properties, phase diagrams, band structures, transport, ab-initio theories, and semi-empirical theories. Each chapter includes extensive tables and figures as well as problem sets.
Download or read book Spontaneous Ordering in Semiconductor Alloys written by Angelo Mascarenhas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomenonofspontaneous ordering in semiconductoralloys, which can be categorized as a self-organized process, is observed to occur sponta neously during epitaxial growth of certain ternary alloy semiconductors and results in a modification of their structural, electronic, and optical properties. There has been a great dealofinterest in learning how to control this phenome non so that it may be used for tailoring desirable electronic and optical properties. There has been even greater interest in exploiting the phenomenon for its unique ability in providing an experimental environment of controlled alloy statistical fluctuations. As such, itimpacts areasofsemiconductorscience and technology related to the materials science ofepitaxial growth, statistical mechanics, and electronic structure of alloys and electronic and photonic devices. During the past two decades, significant progress has been made toward understanding the mechanisms that drive this phenomenon and the changes in physical properties that result from it. A variety of experimental techniques have been used to probe the phenomenon and several attempts made atproviding theoretical models both for the ordering mechanisms as well as electronic structure changes. The various chapters of this book provide a detailed account of these efforts during the past decade. The first chapter provides an elaborate account of the phenomenon, with an excellent perspective of the structural and elec tronic modifications itinduces.
Download or read book Statistical Thermodynamics of Semiconductor Alloys written by Vyacheslav A Elyukhin and published by Elsevier. This book was released on 2015-10-23 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical Thermodynamics of Semiconductor Alloys is the consideration of thermodynamic properties and characteristics of crystalline semiconductor alloys by the methods of statistical thermodynamics. The topics presented in this book make it possible to solve such problems as calculation of a miscibility gap, a spinodal decomposition range, a short-range order, deformations of crystal structure, and description of the order-disorder transitions. Semiconductor alloys, including doped elemental semiconductors are the basic materials of solid-state electronics. Their structural stability and other characteristics are key to determining the reliability and lifetime of devices, making the investigation of stability conditions an important part of semiconductor physics, materials science, and engineering. This book is a guide to predicting and studying the thermodynamic properties and characteristics of the basic materials of solid-state electronics. Includes a complete and detailed consideration of the cluster variation method (CVM) Provides descriptions of spinodal decomposition ranges of crystalline alloys Presents a representation of thermodynamics characteristics and properties as a miscibility gap by using the different approximations of CVM Covers a unique, detailed consideration of the valence force field model with the complete collection of formulas
Download or read book Ternary Alloys Based on III V Semiconductors written by Vasyl Tomashyk and published by CRC Press. This book was released on 2017-09-29 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-V semiconductors have attracted considerable attention due to their applications in the fabrication of electronic and optoelectronic devices as light-emitting diodes and solar cells. Because of their wide applications in a variety of devices, the search for new semiconductor materials and the improvement of existing materials is an important field of study. This new book covers all known information about phase relations in ternary systems based on III-V semiconductors. This book will be of interest to undergraduate and graduate students studying materials science, solid state chemistry, and engineering. It will also be relevant for researchers at industrial and national laboratories, in addition to phase diagram researchers, inorganic chemists, and solid state physicists.
Download or read book Silicon Germanium and Their Alloys written by Gudrun Kissinger and published by CRC Press. This book was released on 2014-12-09 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the vast knowledge accumulated on silicon, germanium, and their alloys, these materials still demand research, eminently in view of the improvement of knowledge on silicon-germanium alloys and the potentialities of silicon as a substrate for high-efficiency solar cells and for compound semiconductors and the ongoing development of nanodevic
Download or read book Silicon Germanium Carbon Alloys written by S. Pantellides and published by CRC Press. This book was released on 2002-07-26 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon (C) and Silicon Germanium (SiGe) work like a magic sauce. At least in small concentrations, they make everything taste better. It is remarkable enough that SiGe, a new material, and the heterobipolar transistor, a new device, appear on the brink of impacting the exploding wireless market. The addition of C to SiGe, albeit in small concentrations, looks to have breakthrough potential. Here, at last, is proof that materials science can put a rocket booster on the silicon-mind, the silicon transistor. Scientific excitement arises, as always, from the new possibilities a multicomponent materials system offers. Bandgaps can be changed, strains can be tuned, and properties can be tailored. This is catnip to the materials scientist. The wide array of techniques applied here to the SiGeC system bear testimony to the ingenious approaches now available for mastering the complexities of new materials
Download or read book The Materials Science of Semiconductors written by Angus Rockett and published by Springer Science & Business Media. This book was released on 2007-11-20 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes semiconductors from a materials science perspective rather than from condensed matter physics or electrical engineering viewpoints. It includes discussion of current approaches to organic materials for electronic devices. It further describes the fundamental aspects of thin film nucleation and growth, and the most common physical and chemical vapor deposition techniques. Examples of the application of the concepts in each chapter to specific problems or situations are included, along with recommended readings and homework problems.
Download or read book Structural Properties of Bismuth bearing Semiconductor Alloys written by Martha A. Berding and published by . This book was released on 1986 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Indium Nitride and Related Alloys written by Timothy David Veal and published by CRC Press. This book was released on 2011-06-03 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by recognized leaders in this dynamic and rapidly expanding field, Indium Nitride and Related Alloys provides a clear and comprehensive summary of the present state of knowledge in indium nitride (InN) research. It elucidates and clarifies the often confusing and contradictory scientific literature to provide valuable and rigorous insight into the structural, optical, and electronic properties of this quickly emerging semiconductor material and its related alloys. Drawing from both theoretical and experimental perspectives, it provides a thorough review of all data since 2001 when the band gap of InN was identified as 0.7 eV. The superior transport and optical properties of InN and its alloys offer tremendous potential for a wide range of device applications, including high-efficiency solar cells and chemical sensors. Indeed, the now established narrow band gap nature of InN means that the InGaN alloys cover the entire solar spectrum and InAlN alloys span from the infrared to the ultraviolet. However, with unsolved problems including high free electron density, difficulty in characterizing p-type doping, and the lack of a lattice-matched substrate, indium nitride remains perhaps the least understood III-V semiconductor. Covering the epitaxial growth, experimental characterization, theoretical understanding, and device potential of this semiconductor and its alloys, this book is essential reading for both established researchers and those new to the field.
Download or read book Local Structure and Dynamics of III V Semiconductor Alloys by High Resolution X ray Pair Distribution Function Analysis written by Il-Kyoung Jeong and published by . This book was released on 2001 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Dimensional Semiconductors written by Jingbo Li and published by John Wiley & Sons. This book was released on 2020-03-10 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth overview of two-dimensional semiconductors from theoretical studies, properties to emerging applications! Two-dimensional (2D) materials have attracted enormous attention due to their exotic properties deriving from their ultrathin dimensions. 2D materials, such as graphene, transition metal dichalcogenides, transition metal oxides, black phosphorus and boron nitride, exhibit versatile optical, electronic, catalytic and mechanical properties, thus can be used in a wide range of applications, including electronics, optoelectronics and optical applications. Two-Dimensional Semiconductors: Synthesis, Physical Properties and Applications provides an in-depth view of 2D semiconductors from theoretical studies, properties to applications, taking into account the current state of research and development. It introduces various preparation methods and describes in detail the physical properties of 2D semiconductors including 2D alloys and heterostructures. The covered applications include, but are not limited to, field-effect transistors, spintronics, solar cells, photodetectors, light-emitting diode, sensors and bioelectronics. Highly topical: 2D materials are a rapidly advancing field that attracts increasing attention Concise overview: covers theoretical studies, preparation methods, physical properties, potential applications, the challenges and opportunities Application oriented: focuses on 2D semiconductors that can be used in various applications such as field-effect transistors, solar cells, sensors and bioelectronics Highly relevant: newcomers as well as experienced researchers in the field of 2D materials will benefit from this book Two-Dimensional Semiconductors: Synthesis, Physical Properties and Applications is written for materials scientists, semiconductor and solid state physicists, electrical engineers, and readers working in the semiconductor industry.
Download or read book Compound Semiconductors 1995 Proceedings of the Twenty Second INT Symposium on Compound Semiconductors held in Cheju Island Korea 28 August 2 September 1995 written by Institute of Physics Conference and published by CRC Press. This book was released on 2020-10-28 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound Semiconductors 1995 focuses on emerging applications for GaAs and other compound semiconductors, such as InP, GaN, GaSb, ZnSe, and SiC, in the electronics and optoelectronics industries. The book presents the research and development work in all aspects of compound semiconductors. It reflects the maturity of GaAs as a semiconductor material and the rapidly increasing pool of research information on many other compound semiconductors. Covering the full breadth of the subject, from growth through processing to devices and integrated circuits, this volume provides researchers in materials science, device physics, condensed matter physics, and electrical and electronic engineering with a comprehensive overview of developments in this well-established research area.
Download or read book Electronic Structure of Disordered Alloys Surfaces and Interfaces written by Ilja Turek and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, there is an increasing interest in the prediction of properties of classical and new materials such as substitutional alloys, their surfaces, and metallic or semiconductor multilayers. A detailed understanding based on a thus of the utmost importance for fu microscopic, parameter-free approach is ture developments in solid state physics and materials science. The interrela tion between electronic and structural properties at surfaces plays a key role for a microscopic understanding of phenomena as diverse as catalysis, corrosion, chemisorption and crystal growth. Remarkable progress has been made in the past 10-15 years in the understand ing of behavior of ideal crystals and their surfaces by relating their properties to the underlying electronic structure as determined from the first principles. Similar studies of complex systems like imperfect surfaces, interfaces, and mul tilayered structures seem to be accessible by now. Conventional band-structure methods, however, are of limited use because they require an excessive number of atoms per elementary cell, and are not able to account fully for e.g. substitu tional disorder and the true semiinfinite geometry of surfaces. Such problems can be solved more appropriately by Green function techniques and multiple scattering formalism.
Download or read book Heterojunction Band Line ups and the Alloying Effect in Compound Semiconductor Alloys written by Chih-Kang Shih and published by . This book was released on 1988 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quaternary Alloys Based on II VI Semiconductors written by Vasyl Tomashyk and published by CRC Press. This book was released on 2014-10-20 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doped by isovalent or heterovalent foreign impurities, II–VI semiconductor compounds enable control of optical and electronic properties, making them ideal in detectors, solar cells, and other precise device applications. Quaternary alloys allow a simultaneous adjustment of band gap and lattice constant, increasing radiant efficiency at a wide range of wavelengths. Quaternary Alloys Based on II–VI Semiconductors consolidates data pertaining to diagrams of quaternary systems based on these semiconductor compounds. The book illustrates up-to-date experimental and theoretical information about phase relations based on II–VI semiconductor systems with four components. It critically evaluates many industrially significant systems presented in two-dimensional sections for the condensed phases. The author classifies all materials according to the periodic groups of their constituent atoms and additional components in the order of their group number. Each quaternary database description contains brief information on the diagram type, possible phase transformations and physical–chemical interactions of the components, thermodynamic characteristics, and methods for equilibrium investigation and sample preparation. Most of the phase diagrams are in their original form. For those with varying published data, the text includes several versions for comparison. This book provides invaluable data for technologists and researchers involved in developing and manufacturing II–VI semiconductors at industrial and national laboratories. It is also suitable for phase relations researchers, inorganic chemists, and semiconductor physicists as well as graduate students in materials science and engineering. Check out the companion books: Ternary Alloys Based on II–VI Semiconductor Compounds and Multinary Alloys Based on II–VI Semiconductors
Download or read book Handbook for III V High Electron Mobility Transistor Technologies written by D. Nirmal and published by CRC Press. This book was released on 2019-05-14 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots
