Download or read book Vibration Control of Active Structures written by A. Preumont and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: My objective in writing this book was to cross the bridge between the structural dynamics and control communities, while providing an overview of the potential of SMART materials for sensing and actuating purposes in active vibration c- trol. I wanted to keep it relatively simple and focused on systems which worked. This resulted in the following: (i) I restricted the text to fundamental concepts and left aside most advanced ones (i.e. robust control) whose usefulness had not yet clearly been established for the application at hand. (ii) I promoted the use of collocated actuator/sensor pairs whose potential, I thought, was strongly underestimated by the control community. (iii) I emphasized control laws with guaranteed stability for active damping (the wide-ranging applications of the IFF are particularly impressive). (iv) I tried to explain why an accurate pred- tion of the transmission zeros (usually called anti-resonances by the structural dynamicists) is so important in evaluating the performance of a control system. (v) I emphasized the fact that the open-loop zeros are more difficult to predict than the poles, and that they could be strongly influenced by the model trun- tion (high frequency dynamics) or by local effects (such as membrane strains in piezoelectric shells), especially for nearly collocated distributed actuator/sensor pairs; this effect alone explains many disappointments in active control systems.

Download or read book Responsive Systems for Active Vibration Control written by A. Preumont and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural vibrations have become the critical factor limiting the performance of many engineering systems, typical amplitudes ranging from meters to a few nanometers. Many acoustic nuisances in transportation systems and residential and office buildings are also related to structural vibrations. The active control of such vibrations involves nine orders of magnitude of vibration amplitude, which exerts a profound influence on the technology. Active vibration control is highly multidisciplinary, involving structural vibration, acoustics, signal processing, materials science, and actuator and sensor technology. Chapters 1-3 of this book provide a state-of-the-art introduction to active vibration control, active sound control, and active vibroacoustic control, respectively. Chapter 4 discusses actuator/sensor placement, Chapter 5 deals with robust control of vibrating structures, Chapter 6 discusses finite element modelling of piezoelectric continua and Chapter 7 addresses the latest trends in piezoelectric multiple-degree-of-freedom actuators/sensors. Chapters 8-12 deal with example applications, including semi-active joints, active isolation and health monitoring. Chapter 13 addresses MEMS technology, while Chapter 14 discusses the design of power amplifiers for piezoelectric actuators.

Download or read book Active Control of Structures written by Andre Preumont and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: With Active Control of Structures, two global pioneers present the state-of-the-art in the theory, design and application of active vibration control. As the demand for high performance structural systems increases, so will the demand for information and innovation in structural vibration control; this book provides an effective treatise of the subject that will meet this requirement. The authors introduce active vibration control through the use of smart materials and structures, semi-active control devices and a variety of feedback options; they then discuss topics including methods and devices in civil structures, modal analysis, active control of high-rise buildings and bridge towers, active tendon control of cable structures, and active and semi-active isolation in mechanical structures. Active Control of Structures: Discusses new types of vibration control methods and devices, including the newly developed reduced-order physical modelling method for structural control; Introduces triple high-rise buildings connected by active control bridges as devised by Professor Seto; Offers a design strategy from modelling to controller design for flexible structures; Makes prolific use of practical examples and figures to describe the topics and technology in an intelligible manner.

Download or read book Nonlinear Vibration with Control written by David Wagg and published by Springer Science & Business Media. This book was released on 2009-12-03 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors discuss the interrelationship of linear vibration theory for multi-degree-of-freedom systems; nonlinear dynamics and chaos; and nonlinear control. No other book covers these areas in the same way, so this is a new perspective on these topics.

Download or read book Structure Vibration Vibration Mitigation Materials and Structures written by Zhao-Dong Xu and published by Frontiers Media SA. This book was released on 2019-12-04 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a common phenomenon when a structure is exposed to one or multiple mechanical or environmental actions, always at great cost to lives and to the economy. In order to reduce the adverse impact of vibration, vibration mitigation materials and structures have recently been at the center of attention. This book “Structure Vibration: Vibration Mitigation Materials and Structures” as the tip of the iceberg, provides a window to let people know about the flourishing of this young field. Twelve original research papers and one review paper have been included in this book to represent the recent development of vibration mitigation technology. The vibration mitigation material manufacture process, testing, analysis, and application have completely thoroughly studied. We wish more cutting-edge achievements will arise to benefit mankind and continually promote the development of vibration mitigation materials and structures.

Download or read book Technology of Semiactive Devices and Applications in Vibration Mitigation written by Fabio Casciati and published by John Wiley & Sons. This book was released on 2006-06-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers have studied many methods of using active and passive control devices for absorbing vibratory energy. Active devices, while providing significant reductions in structural motion, typically require large (and often multiply-redundant) power sources, and thereby raise concerns about stability. Passive devices are fixed and cannot be modified based on information of excitation or structural response. Semiactive devices on the other hand can provide significant vibration reductions comparable to those of active devices but with substantially reduced power requirements and in a stable manner. Technology of Semiactive Devices and Applications in Vibration Mitigation presents the most up-to-date research into semiactive control systems and illustrates case studies showing their implementation and effectiveness in mitigating vibration. The material is presented in a way that people not familiar with control or structural dynamics can easily understand. Connecting structural dynamics with control, this book: Provides a history of semiactive control and a bibliographic review of the most common semiactive control strategies. Presents state-of-the-art semiactive control systems and illustrates several case studies showing their implementation and effectiveness to mitigate vibration. Illustrates applications related to noise attenuation, wind vibration damping and earthquake effects mitigation amongst others. Offers a detailed comparison between collocated and non-collocated systems. Formulates the design concepts and control algorithms in simple and readable language. Includes an appendix that contains critical considerations about semiactive devices and methods of evaluation of the original damping of a structure. Technology of Semiactive Devices and Applications in Vibration Mitigation is a must-have resource for researchers, practitioners and design engineers working in civil, automotive and mechanical engineering. In addition it is undoubtedly the key reference for all postgraduate students studying in the field.

Download or read book The Shock and Vibration Bulletin written by and published by . This book was released on 1980-09 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics of Controlled Mechanical Systems written by Gerhard Schweitzer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many mechanical systems are actively controlled in order to improve their dynamic performance. Examples are elastic satellites, active vehicle suspension systems, robots, magnetic bearings, automatic machine tools. Problems that are typical for mechanical systems arise in the following areas: - Modeling the mechanical system in such a way that the model is suitable for control design - Designing multivariable controls to be robust with respect to parameter variations and uncertainties in system order of elastic structures - Fast real-time signal processing - Generating high dynamic control forces and providing the necessary control power - Reliability and safety concepts, taking into account the growing role of software within the system The objective of the Symposium has been to present methods that contribute to the solutions of such problems. Typical examples are demonstrating the state of the art It intends to evalua~ the limits of performance that can be achieved by controlling the dynamics, and it should point to gaps in present research and areas for future research. Mainly, it has brought together leading experts from quite different areas presenting their points of view. The International Union of Theoretical and Applied Mechanics (lUTAM) has initiated and sponsored, in cooperation with the International Federation of Automatic Control (IF AC), this Symposium on Dynamics of Controlled Mechanical Systems, held at the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, May 3D-June 3, 1988.

Download or read book Advanced Seat Suspension Control System Design for Heavy Duty Vehicles written by Haiping Du and published by Academic Press. This book was released on 2020-05-22 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Seat Suspension Control System Design for Heavy Duty Vehicles provides systematic knowledge of the advanced seat suspension design and control for heavy duty vehicles. Nowadays, people are paying more and more attention to ride comfort and the health of drivers and passengers. This is especially for heavy duty vehicles, where drivers/operators are exposed to much severer vibrations than those in passenger vehicles due to a harsh working environment, operating conditions, and long hour driving, etc. Seat suspension systems can effectively help to suppress the high magnitude vibration transmitted to drivers with relatively simple structure and low cost, and hence are widely adopted in heavy duty vehicles. This book helps researchers and engineers to have a comprehensive understanding of the seat suspension system and to conduct in-depth studies on seat suspension design and control; this book covers a wide range of perspectives about seat suspension design and control methods. - Describes the variable damping, variable stiffness, and, especially, variable inertance seat suspensions - Provides the advanced and comprehensive knowledge about semi-active vibration control - Introduces the multiple-DOF seat suspension - Includes the innovative hybrid seat suspension and nonlinear seat suspension - All the introduced designs have been prototyped and experimentally validated - Provides Matlab Simulation programming codes

Download or read book Parallel Manipulators of Robots written by Korganbay Sagnayevich Sholanov and published by Springer Nature. This book was released on 2020-09-10 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the theoretical framework of parallel manipulators and presents examples of their application. The theoretical part begins with the theory of parallel manipulator synthesis. Working on this basis, various topology designs of one-loop and multiloop parallel manipulators are then obtained. The next section describes the zero parameters method for the analysis of mechanism (manipulator) structure with closed kinematic circuits, and includes examples of its application, highlighting its advantages compared to traditional methods. The book then presents the redundant parameters method for determining the position of special parallel manipulator links, and discusses its application in solving the direct problem of link position for multiloop manipulators. It also addresses one-loop and multiloop manipulators, and includes a solution for the direct and inverse link position problems of kinematics. In closing, the book presents a range of potential applications for parallel manipulator. These examples are intended to promote the development and implementation of new engineering solutions, e.g. in seismic protection systems, renewable energy and other areas. The book includes a wealth of material that can be used for teaching undergraduate, graduate and PhD students majoring in robotics, automation and related fields, and can also be used by researchers to solve problems in connection with introducing robotics technologies.

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1984 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Software Engineering written by Thomas Zurawka and published by SAE International. This book was released on 2016-09-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early seventies, the development of the automobile has been characterized by a steady increase in the deploymnet of onboard electronics systems and software. This trend continues unabated and is driven by rising end-user demands and increasingly stringent environmental requirements. Today, almost every function onboard the modern vehicle is electronically controlled or monitored. The software-based implementation of vehicle functions provides for unparalleled freedoms of concept and design. However, automobile development calls for the accommodation of contrasting prerequisites – such as higher demands on safety and reliability vs. lower cost ceilings, longer product life cycles vs. shorter development times – along with growing proliferation of model variants. Automotive Software Engineering has established its position at the center of these seemingly conflicting opposites. This book provides background basics as well as numerous suggestions, rare insights, and cases in point concerning those processes, methods, and tools that contribute to the surefooted mastery of the use of electronic systems and software in the contemporary automobile.

Download or read book Vibration Control of Active Structures written by André Preumont and published by Springer. This book was released on 2018-02-10 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is an introduction to the dynamics of active structures and to the feedback control of lightly damped flexible structures; the emphasis is placed on basic issues and simple control strategies that work. Now in its fourth edition, more chapters have been added, and comments and feedback from readers have been taken into account, while at the same time the unique premise of bridging the gap between structure and control has remained. Many examples, covering a broad field of applications from bridges to satellites and telescopes, and problems bring the subject to life and take the audience from theory to practice. The book has 19 chapters dealing with some concepts in structural dynamics; electromagnetic and piezoelectric transducers; piezoelectric beam, plate and truss; passive damping with piezoelectric transducers; collocated versus non-collocated control; active damping with collocated systems; vibration isolation; state space approach; analysis and synthesis in the frequency domain; optimal control; controllability and observability; stability; applications; tendon control of cable structures; active control of deformable mirrors for Adaptive Optics and large earth-based and space telescopes; and semi-active control. The book concludes with an exhaustive bibliography and index. This book is intended for structural engineers who want to acquire some background in vibration control, and for control engineers who are dealing with flexible structures. It can be used as a textbook for a graduate course on vibration control or active structures. A solutions manual is available through the publisher to teachers using this book as a textbook.

Download or read book Energy Dissipation and Vibration Control Modeling Algorithm and Devices written by Gangbing Song and published by MDPI. This book was released on 2018-04-27 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Energy Dissipation and Vibration Control: Modeling, Algorithm and Devices" that was published in Applied Sciences

Download or read book Proceedings of the 1st International Conference on New Materials Machinery and Vehicle Engineering written by J. Xu and published by IOS Press. This book was released on 2022-05-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: New materials are constantly being developed which may improve or transform many aspects of our lives, and nowhere is this more exciting than in the fields of vehicle and machinery technology. This book presents the proceedings of the 2022 International Conference on New Materials, Machinery and Vehicle Engineering (NMMVE 2022), held as a virtual event due to the COVID-19 pandemic and travel restrictions, from 18 - 20 March 2022. NMMVE 2022 provides an international forum for researchers and engineers to present and discuss recent advances, new techniques, and applications in the fields of new materials, machinery and vehicle engineering, and attracts academics, scientists, engineers, postgraduates, and other professionals from a wide range of universities and institutions. A total of 121 submissions were received, from which 48 were accepted for inclusion in the conference and proceeding after a rigorous, standard single-blind reviewing process. The papers are grouped into 3 sections: machinery (30 papers); new materials (11 papers); and vehicle engineering (7 papers). Providing an overview of the latest developments in these fields, the book will be of interest to all those wishing to know more about new materials and machine and vehicle engineering.

Download or read book Advances in Control Instrumentation Systems written by V. I. George and published by Springer Nature. This book was released on 2020-07-10 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the Control Instrumentation System Conference (CISCON 2019) in the specialized area of cyber-physical systems. The topics include current trends in the areas of instrumentation, sensors and systems, industrial automation and control, image and signal processing, robotics, renewable energy, power systems and power drives, and artificial intelligence technologies. Wide-ranging applications in various fields such as aerospace, biomedical, optical imaging and biomechanics are covered in the book. The contents of this book are useful for students, researchers as well as industry professionals working in the field of instrumentation and control engineering.

Download or read book Advances in Applied Nonlinear Dynamics Vibration and Control 2021 written by Xingjian Jing and published by Springer Nature. This book was released on 2021-09-23 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is to provide readers with up-to-date advances in applied and interdisciplinary engineering science and technologies related to nonlinear dynamics, vibration, control, robotics, and their engineering applications, developed in the most recent years. All the contributed chapters come from active scholars in the area, which cover advanced theory & methods, innovative technologies, benchmark experimental validations and engineering practices. Readers would benefit from this state-of-the-art collection of applied nonlinear dynamics, in-depth vibration engineering theory, cutting-edge control methods and technologies, and definitely find stimulating ideas for their on-going R&D work. This book is intended for graduate students, research staff and scholars in academics, and also provides useful hand-up guidance for professional and engineers in practical engineering missions.