Download or read book Semi active Damping for an Intelligent Adaptive Ankle Prosthesis written by Andrew Kennedy LaPrè and published by . This book was released on 2012 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern lower limb prostheses are devices that replace missing limbs, making it possible for lower limb amputees to walk again. Most commercially available prosthetic limbs lack intelligence and passive adaptive capabilities, and none available can adapt on a step by step basis. Often, amputees experience a loss of terrain adaptability as well as stability, leaving the amputee with a severely altered gait. This work is focused on the development of a semi-active damping system for use in intelligent terrain adaptive ankle prostheses. The system designed consists of an optimized hydraulic cylinder with an electronic servo valve which throttles the hydraulic fluid flowing between the cylinder's chambers, acting on the prosthesis joint with a moment arm in series with a carbon spring foot. This provides the capability to absorb energy during the amputees gait cycle in a controlled manner, effectively allowing the passive dynamic response to be greatly altered continuously by leveraging a small energy source. A virtual simulation of an amputee gait cycle with the adaptive semi-active ankle design revealed the potential to replicate adaptive abilities of the human ankle. The results showed very similarly that irregularities in amputee biomechanics can be greatly compensated for using semi-active damping.

Download or read book Advanced Materials for Biomechanical Applications written by Ashwani Kumar and published by CRC Press. This book was released on 2022-05-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth knowledge about cross rolling of biomedical alloys, cellulose, magnetic iron oxide nanoparticles, magnesium-based nanocomposites, titanium, titanium alloys, stainless steel, and improved biodegradable implants materials for biomechanical applications like joint replacements, bone plates, bone cement, artificial ligaments and tendons, dental implants for tooth fixation, and hip implants. It comprehensively covers advancements in materials including graphene-reinforced magnesium metal matrix, magnesium and its alloys, and 2D nanomaterials. The text discusses important topics including advanced materials for biomechanical applications, design, and analysis of stainless steel 316L for femur bone fracture healing, design and manufacturing of prosthetic dental implants, a biomechanical study of a low-cost prosthetic leg, and an energy harvesting mechanism for walking applications. The text will serve as a useful text for graduate students, academic researchers, and general practitioners in areas including materials science, manufacturing engineering, mechanical engineering, and biomechanical engineering.

Download or read book Man Machine Environment System Engineering written by Shengzhao Long and published by Springer. This book was released on 2018-09-24 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings showcase the best papers selected from more than 500 submissions, and introduce readers to the hottest research topics and the latest developmental trends in the theory and application of MMESE. The integrated and advanced science research topic Man-Machine-Environment System Engineering (MMESE) was first established in China by Professor Shengzhao Long in 1981, with direct support from one of the greatest modern Chinese scientists, Xuesen Qian. In a letter to Long from October 22nd, 1993, Qian wrote: “You have created a very important modern science and technology in China!” MMESE primarily focuses on the relationship between Man, Machine and Environment, studying the optimum combination of man-machine-environment systems. In this system, “Man” refers to working people as the subject in the workplace (e.g. operators, decision-makers); “Machine” is the general name for any object controlled by Man (including tools, machinery, computers, systems and technologies), and “Environment” describes the specific working conditions under which Man and Machine interact (e.g. temperature, noise, vibration, hazardous gases etc.). The three main goals of optimizing man-machine-environment systems are to ensure safety, efficiency and economy. These proceedings present interdisciplinary studies on essential concepts and methods from physiology, psychology, system engineering, computer science, environmental science, management, education, and other related disciplines. As such, they offer a valuable resource for all researchers and professionals whose work involves interdisciplinary areas touching on MMESE subjects.

Download or read book Development and Application of Semi active Prosthetic Foot ankle Systems written by Kieran Kieran Nichols and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a need for improved design and function of prosthetic devices to aid walking in persons with transtibial amputations. This dissertation focused on two semi-active ankle-foot prosthetic devices, the Variable Stiffness Foot (VSF) and Two Axis aDaptable Ankle (TADA), which allow users to change biomechanical ankle-foot functions using simpler designs, lower costs, and less power than active prostheses. The background for this dissertation explored the main lower-limb biomechanical principles of prosthetic design, prosthetic-walking mechanics, and sensor feedback. The VSF manuscript investigated the mechanical impact of adjusting stiffness on lower limb mechanics using a prosthetic foot, which can modulate forefoot stiffness. A less stiff VSF resulted in increased ankle dorsiflexion angle, decreased ankle plantarflexor moment, decreased knee extension, decreased knee flexor moment, and increased magnitudes of prosthetic energy storage, energy return, and push-off power. These findings suggest that a less stiff VSF may offer advantages in lower joint moments and greater ankle angle range of motion for individuals with lower-limb prostheses. The Two Axis aDaptable Ankle (TADA) is a semi-active prosthetic ankle that offers independent modulation of sagittal and frontal ankle angles. The first TADA study modified a Raspberry Pi 4 for real-time control of brushless direct-current motors, allowing for precise and reliable ankle angle adjustments. The control system employed CANopen over EtherCAT (CoE) for synchronized communication between the Raspberry Pi and motor controllers. The results demonstrated improved movement times, lower movement errors, and higher data transmission rates. As a continuation, the final TADA study aimed to create an ankle prosthesis that can synchronously record lower-body kinematics and kinetics and assess the sensitivity of those mechanics to different walking speeds and ankle angles for an unimpaired participant. Using a pylon load cell, the results showed that peak magnitudes and impulses increased for plantarflexor moments with increased plantarflexion angle and for evertor moments with increased inversion angles. Moreover, the peak sagittal pylon moments increased with higher walking speeds. The integrated control system of the TADA effectively controls ankle angles, can affect lower-body mechanical outcomes, and can allow for efficient adaptation to various speeds and terrains in users with transtibial amputations.

Download or read book Replacement of an Active Metatarsophalangeal Joint with a Passive Spring damper System for Implementation in an Ankle Prosthesis written by Eric S. Kline and published by . This book was released on 2016 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical modeling was used to determine the optimal configuration of a replacement metatarsophalangeal (MTP) joint to be used in a prosthetic ankle. A spring was added to the joint to store energy and release it during the part of the gait cycle where the highest torque is required, reducing the torque the motor must exert. A linear spring-damper system adapted for use on a rotational joint was found to exhibit similar behavior to the biological joint for the range of motion required. The optimal gear ratio for the ankle motor, spring constant, and damping constant for the MTP joint were found using a MATLAB program written for this purpose. A physical prototype was fabricated, and testing was performed on an Instron machine to validate the results.

Download or read book Neuro Robotics written by Panagiotis Artemiadis and published by Springer. This book was released on 2014-07-10 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neuro-robotics is one of the most multidisciplinary fields of the last decades, fusing information and knowledge from neuroscience, engineering and computer science. This book focuses on the results from the strategic alliance between Neuroscience and Robotics that help the scientific community to better understand the brain as well as design robotic devices and algorithms for interfacing humans and robots. The first part of the book introduces the idea of neuro-robotics, by presenting state-of-the-art bio-inspired devices. The second part of the book focuses on human-machine interfaces for performance augmentation, which can seen as augmentation of abilities of healthy subjects or assistance in case of the mobility impaired. The third part of the book focuses on the inverse problem, i.e. how we can use robotic devices that physically interact with the human body, in order (a) to understand human motor control and (b) to provide therapy to neurologically impaired people or people with disabilities.

Download or read book Advanced Mobile Robotics written by DaeEun Kim and published by MDPI. This book was released on 2020-03-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots are widely used for surveillance, guidance, transportation and entertainment tasks, as well as medical applications. This Special Issue intends to concentrate on recent developments concerning mobile robots and the research surrounding them to enhance studies on the fundamental problems observed in the robots. Various multidisciplinary approaches and integrative contributions including navigation, learning and adaptation, networked system, biologically inspired robots and cognitive methods are welcome contributions to this Special Issue, both from a research and an application perspective.

Download or read book Lower limb Prosthetics written by Norman Berger and published by . This book was released on 1997 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuzzy Controller Design written by Zdenko Kovacic and published by CRC Press. This book was released on 2018-10-08 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy control methods are critical for meeting the demands of complex nonlinear systems. They bestow robust, adaptive, and self-correcting character to complex systems that demand high stability and functionality beyond the capabilities of traditional methods. A thorough treatise on the theory of fuzzy logic control is out of place on the design bench. That is why Fuzzy Controller Design: Theory and Applications offers laboratory- and industry-tested algorithms, techniques, and formulations of real-world problems for immediate implementation. With surgical precision, the authors carefully select the fundamental elements of fuzzy logic control theory necessary to formulate effective and efficient designs. The book supplies a springboard of knowledge, punctuated with examples worked out in MATLAB®/SIMULINK®, from which newcomers to the field can dive directly into applications. It systematically covers the design of hybrid, adaptive, and self-learning fuzzy control structures along with strategies for fuzzy controller design suitable for on-line and off-line operation. Examples occupy an entire chapter, with a section devoted to the simulation of an electro-hydraulic servo system. The final chapter explores industrial applications with emphasis on techniques for fuzzy controller implementation and different implementation platforms for various applications. With proven methods based on more than a decade of experience, Fuzzy Controller Design: Theory and Applications is a concise guide to the methodology, design steps, and formulations for effective control solutions.

Download or read book Adaptive Mobile Robotics written by Abul K. M. Azad and published by World Scientific. This book was released on 2012 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2012 conference. Robots are no longer confined to industrial and manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.

Download or read book Powered Prostheses written by Houman Dallali and published by Academic Press. This book was released on 2020-04-17 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powered Prostheses: Design, Control, and Clinical Applications presents the state-of-the-art in design, control and application of assistive technologies used in rehabilitation, including powered prostheses used in lower and upper extremity amputees and orthosis used in the rehabilitation of various joint disorders. The progress made in this field over the last decade is so vast that any new researcher in this field will have to spend years digesting the main achievements and challenges that remain. This book provides a comprehensive vision of advances, along with the challenges that remain on the path to the development of true bionic technology. - Describes the latest assistive technologies that can help individuals deal with joint pain or limb loss - Presents a tangible and intuitive description of scientific achievements made - Highlights the existing technologies and devices that are available and used by amputees or patients with mobility limitations - Suggests solutions and new results that can further enhance assistive technologies

Download or read book Active Above Knee Prosthesis written by Zlata Jelacic and published by Academic Press. This book was released on 2020-06-16 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Active Above-Knee Prosthesis: A Guide to a Smart Prosthetic Leg presents original research and development results, providing a firsthand overview of idea generation and prototype production. The book gives insights into the problem of stair ascent for people with above-knee amputation and offers a solution in the form of a physical prototype of an active above-knee prosthesis with an actuated ankle. The book's authors have developed and tested a physical prototype of an active above-knee prosthesis, giving anyone who is researching and designing prosthetic devices firsthand knowledge on how to build on, and continue with, work that has already been done. - Presents state-of-the-art technology in powered prosthetics - Helps readers evaluate design options and create new developments - Provides guidance on the evolution of advanced prosthetic design

Download or read book Mems for Automotive and Aerospace Applications written by Michael Kraft and published by Elsevier. This book was released on 2013-01-02 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS for automotive and aerospace applications reviews the use of Micro-Electro-Mechanical-Systems (MEMS) in developing solutions to the unique challenges presented by the automotive and aerospace industries. Part one explores MEMS for a variety of automotive applications. The role of MEMS in passenger safety and comfort, sensors for automotive vehicle stability control applications and automotive tire pressure monitoring systems are considered, along with pressure and flow sensors for engine management, and RF MEMS for automotive radar sensors. Part two then goes on to explore MEMS for aerospace applications, including devices for active drag reduction in aerospace applications, inertial navigation and structural health monitoring systems, and thrusters for nano- and pico-satellites. A selection of case studies are used to explore MEMS for harsh environment sensors in aerospace applications, before the book concludes by considering the use of MEMS in space exploration and exploitation. With its distinguished editors and international team of expert contributors, MEMS for automotive and aerospace applications is a key tool for MEMS manufacturers and all scientists, engineers and academics working on MEMS and intelligent systems for transportation. Chapters consider the role of MEMS in a number of automotive applications, including passenger safety and comfort, vehicle stability and control MEMS for aerospace applications are also discussed, including active drag reduction, inertial navigation and structural health monitoring systems Presents a number of case studies exploring MEMS for harsh environment sensors in aerospace

Download or read book Magnetorheological Fluid Technology written by Seung-Bok Choi and published by CRC Press. This book was released on 2012-11-08 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetorheological Fluid Technology: Applications in Vehicle Systems compiles the authors’ recent work involving the application of magnetorheological (MR) fluids and other smart materials in vehicles. It collects concepts that have previously been scattered in peer-reviewed international journals. After introducing the physical phenomena and properties of MR fluids, the book presents control methodologies for effectively controlling vehicle devices and systems featuring MR fluids. The authors also introduce the hysteresis identification of MR fluid and discuss its application through the adoption of the Preisach and polynomial models. They then describe the application of MR-equipped suspension systems in passenger, tracked, and railway vehicles; the application of MR brake systems in passenger vehicles, motorcycles, and bicycles; and the application of several MR technologies in heavy vehicles. The final chapter explores the use of haptic technologies for easily operating vehicle instruments and achieving optimal gear shifting with accelerator pedals. Assuming some technical and mathematical background in vibration, dynamics, and control, this book is designed for scientists and engineers looking to create new devices or systems for vehicles featuring controllable MR fluids. It is also suitable for graduate students who are interested in the dynamic modeling and control methodology of vehicle devices and systems associated with MR fluid technology.

Download or read book How the Body Shapes the Way We Think written by Rolf Pfeifer and published by MIT Press. This book was released on 2006-10-27 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of embodied intelligence and its implications points toward a theory of intelligence in general; with case studies of intelligent systems in ubiquitous computing, business and management, human memory, and robotics. How could the body influence our thinking when it seems obvious that the brain controls the body? In How the Body Shapes the Way We Think, Rolf Pfeifer and Josh Bongard demonstrate that thought is not independent of the body but is tightly constrained, and at the same time enabled, by it. They argue that the kinds of thoughts we are capable of have their foundation in our embodiment—in our morphology and the material properties of our bodies. This crucial notion of embodiment underlies fundamental changes in the field of artificial intelligence over the past two decades, and Pfeifer and Bongard use the basic methodology of artificial intelligence—"understanding by building"—to describe their insights. If we understand how to design and build intelligent systems, they reason, we will better understand intelligence in general. In accessible, nontechnical language, and using many examples, they introduce the basic concepts by building on recent developments in robotics, biology, neuroscience, and psychology to outline a possible theory of intelligence. They illustrate applications of such a theory in ubiquitous computing, business and management, and the psychology of human memory. Embodied intelligence, as described by Pfeifer and Bongard, has important implications for our understanding of both natural and artificial intelligence.

Download or read book Wearable Robots written by José L. Pons and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wearable robot is a mechatronic system that is designed around the shape and function of the human body, with segments and joints corresponding to those of the person it is externally coupled with. Teleoperation and power amplification were the first applications, but after recent technological advances the range of application fields has widened. Increasing recognition from the scientific community means that this technology is now employed in telemanipulation, man-amplification, neuromotor control research and rehabilitation, and to assist with impaired human motor control. Logical in structure and original in its global orientation, this volume gives a full overview of wearable robotics, providing the reader with a complete understanding of the key applications and technologies suitable for its development. The main topics are demonstrated through two detailed case studies; one on a lower limb active orthosis for a human leg, and one on a wearable robot that suppresses upper limb tremor. These examples highlight the difficulties and potentialities in this area of technology, illustrating how design decisions should be made based on these. As well as discussing the cognitive interaction between human and robot, this comprehensive text also covers: the mechanics of the wearable robot and it’s biomechanical interaction with the user, including state-of-the-art technologies that enable sensory and motor interaction between human (biological) and wearable artificial (mechatronic) systems; the basis for bioinspiration and biomimetism, general rules for the development of biologically-inspired designs, and how these could serve recursively as biological models to explain biological systems; the study on the development of networks for wearable robotics. Wearable Robotics: Biomechatronic Exoskeletons will appeal to lecturers, senior undergraduate students, postgraduates and other researchers of medical, electrical and bio engineering who are interested in the area of assistive robotics. Active system developers in this sector of the engineering industry will also find it an informative and welcome resource.

Download or read book Vehicle Noise and Vibration Refinement written by Xu Wang and published by Elsevier. This book was released on 2010-03-12 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: High standards of noise, vibration and harshness (NVH) performance are expected in vehicle design. Refinement is therefore one of the main engineering/design attributes to be addressed when developing new vehicle models and components.Vehicle noise and vibration refinement provides a review of noise and vibration refinement principles, methods, advanced experimental and modelling techniques and palliative treatments necessary in the process of vehicle design, development and integration in order to meet noise and vibration standards. Case studies from the collective experience of specialists working for major automotive companies are included to form an important reference for engineers practising in the motor industry who seek to overcome the technological challenges faced in developing quieter, more comfortable cars.The reader will be able to develop an in-depth knowledge of the source and transmission mechanisms of noise and vibration in motor vehicles, and a clear understanding of vehicle refinement issues that directly influence a customer's purchasing decision. - Reviews noise and vibration refinement principles, methods and modelling techniques necessary in vehicle design, development and integration in order to meet noise and vibration standards - Outlines objectives driving development and the significance of vehicle noise and vibration refinement whilst documenting definitions of key terms for use in practice - Case studies demonstrate measurement and modelling in industry and illustrate key testing methods including hand sensing and environmental testing