Download or read book Self preservation in a Turbulent Free Jet written by Sang-Wook Kim and published by . This book was released on 1979 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Flows written by Jean Piquet and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: obtained are still severely limited to low Reynolds numbers (about only one decade better than direct numerical simulations), and the interpretation of such calculations for complex, curved geometries is still unclear. It is evident that a lot of work (and a very significant increase in available computing power) is required before such methods can be adopted in daily's engineering practice. I hope to l"Cport on all these topics in a near future. The book is divided into six chapters, each· chapter in subchapters, sections and subsections. The first part is introduced by Chapter 1 which summarizes the equations of fluid mechanies, it is developed in C~apters 2 to 4 devoted to the construction of turbulence models. What has been called "engineering methods" is considered in Chapter 2 where the Reynolds averaged equations al"C established and the closure problem studied (§1-3). A first detailed study of homogeneous turbulent flows follows (§4). It includes a review of available experimental data and their modeling. The eddy viscosity concept is analyzed in §5 with the l"Csulting ~alar-transport equation models such as the famous K-e model. Reynolds stl"Css models (Chapter 4) require a preliminary consideration of two-point turbulence concepts which are developed in Chapter 3 devoted to homogeneous turbulence. We review the two-point moments of velocity fields and their spectral transforms (§ 1), their general dynamics (§2) with the particular case of homogeneous, isotropie turbulence (§3) whel"C the so-called Kolmogorov's assumptions are discussed at length.
Download or read book Free Turbulent Mixing written by Philip Thomas Harsha and published by . This book was released on 1971 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Fluid Mechanics written by Andre? Sergeevich Monin and published by Courier Corporation. This book was released on 2007-01-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: "If ever a book on turbulence could be called definitive," declared Science, "it is this book by two of Russia's most eminent and productive scientists in turbulence, oceanography, and atmospheric physics." Noted for its clarity as well as its comprehensive treatment, this two-volume set serves as text or reference. 1971 edition.
Download or read book Mathematical Theory of the Air sprayer Turbulent Fan Jet written by R. D. Brazee and published by . This book was released on 1984 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physically Based Models for Two Phase Flow Phenomena in Steam Injectors A One Dimensional Simulation Approach written by Heinze, David and published by KIT Scientific Publishing. This book was released on 2015-11-24 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1970 with total page 1532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NIST Building Fire Research Laboratory Publications written by and published by . This book was released on 1994 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Variable Density Low Speed Turbulent Flows written by Louis Fulachier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The General Assembly of the International Union of Theoretical and Applied Mechanics in its meeting on August 28, 1994, selected for 1996 only four Mechanics Symposia, of which ours is the only one related to Fluid Mechanics: Variable Density Low Speed Turbulent Flows. This IUTAM Symposium, organized by the Institut de Recherche sur les Phenomenes Hors Equilibre (Marseille), is the logical continuation of the meetings previously organized or co-organized - on the French or European level, such as Euromech 237, Marseille, 1988 - by the same research group ofMarseille. This meeting focused specifically on the structure of turbulent flows in which density varies strongly : the effect of this variation on the velocity and scalar fields is in no sense negligible. We were mainly concerned with low-speed flows subjected to strong local changes of density as a consequence of heat or mass transfer or of chemical reactions. Compressible turbulent flows - such a!" supersonic ones - were also considered in order to underline their similarities to and their differences from low-speed variable density flows.
Download or read book Further Experiments on the Flow and Heat Transfer in a Heated Turbulent Air Jet written by Stanley Corrsin and published by . This book was released on 1949 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurements have been made of the mean total-head and temperature fields in a round turbulent jet with various initial temperatures.
Download or read book Progress in Turbulence X written by Ramis Örlü and published by Springer Nature. This book was released on with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Turbulence V written by Roberto Benzi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under the auspices of the Euromech Committee, the Fifth European Turbulence Conference was held in Siena on 5-8 July 1994. Following the previous ETC meeting in Lyon (1986), Berlin (1988), Stockholm (1990) and Delft (1992), the Fifth ETC was aimed at providing a review of the fundamental aspects of turbulence from a theoretical, numerical and experimental point of view. In the magnificent town of Siena, more than 250 scientists from all over the world, spent four days discussing new ideas on turbulence. As a research worker in the field of turbulence, I must say that the works presented at the Conference, on which this book is based, covered almost all areas in this field. I also think that this book provides a major opportunity to have a complete overview of the most recent research works. I am extremely grateful to Prof. C. Cercignani, Dr. M. Loffredo, and Prof. R. Piva who, as members of the local organizing committee, share the success of the Conference. I also want to thank Mrs. Liu' Catena, for her invaluable contribution to the work done by the local organizing committee and the European Turbulence Committee in the scientific organization of the meeting. The "Servizio Congressi" of the University of Siena provided perfect organization in Siena and wonderful hospitality. The Conference has been supported by CNR, Cira, Alenia, the Universities of Rome "Tor Vergata" and "La Sapienza".
Download or read book Hydraulic Machinery and Cavitation written by Enrique Cabrera and published by Springer. This book was released on 2015-02-27 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic machinery such as turbines and pumps is widely used around the world. Related topics concerning design, operation and maintenance are of relevant interest. In this context, cavitation is a phenomenon to be taken into account, and this was treated in the XVIII IAHR Symposium on Hydraulic Machinery and Cavitation which took place in Valencia, Spain, 16th-19th September, 1996 and which was hosted by the Polytechnic University of Valencia. The proceedings of the Symposium have been published in two volumes. In this first volume, the papers included cover the following topics: Hydraulic Turbines, Analysis and Design Hydraulic Pumps Hydraulic Elements, Dynamic Characterization and Hydraulic Behaviour Cavitation and Sand Erosion In the second volume, the papers included cover the following topics: Hydraulic Transients and Control Systems Related to Hydraulic Machinery and Plants Oscillatory and Vibration Problems in Hydraulic Machinery and Power Stations Experimental Investigations related to Hydraulic Machinery and its Applications Practical Applications of the Hydraulic Machinery Monitoring, Predictive Maintenance and Refurbishment The 119 papers presented at the Symposium, from research groups, consulting companies and manufacturers, constitute an important collection for investigators, engineers and technicians who are interested in updated information on hydraulic machinery. This book is intended to be a reference text comprising the latest innovations on this subject.
Download or read book Structure of Complex Turbulent Shear Flow written by R. Dumas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on structure of Complex turbulent shear flows was proposed by the "Comite National Fran
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 24 (thesis year 1979) a total of 10,033 theses titles from 26 Canadian and 215 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 24 reports these submitted in 1979, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book 50 Years of CFD in Engineering Sciences written by Akshai Runchal and published by Springer Nature. This book was released on 2020-03-09 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prof. D. Brian Spalding, working with a small group of students and colleagues at Imperial College, London in the mid-to late-1960’s, single-handedly pioneered the use of Computational Fluid Dynamics (CFD) for engineering practice.This book brings together advances in computational fluid dynamics in a collection of chapters authored by leading researchers, many of them students or associates of Prof. Spalding. The book intends to capture the key developments in specific fields of activity that have been transformed by application of CFD in the last 50 years. The focus is on review of the impact of CFD on these selected fields and of the novel applications that CFD has made possible. Some of the chapters trace the history of developments in a specific field and the role played by Spalding and his contributions. The volume also includes a biographical summary of Brian Spalding as a person and as a scientist, as well as tributes to Brian Spalding by those whose life was impacted by his innovations. This volume would be of special interest to researchers, practicing engineers, and graduate students in various fields, including aerospace, energy, power and propulsion, transportation, combustion, management of the environment, health and pharmaceutical sciences.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
