Download or read book Selection Guidelines for Corrosion Resistant Alloys in the Oil and Gas Industry written by and published by . This book was released on 1995 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion resistant Alloys CRAs in the Oil and Gas Production written by Bruce D. Craig and published by . This book was released on 2011 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.
Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. Selects cost-effective methods to control corrosion Quantitatively measures and estimates corrosion rates Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others Provides a gateway to more than 1,000 industry best practices and international standards
Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by European Federation of Corrosion and published by CRC Press. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and updated set of guidelines applicable to stainless steels, nickel alloys and titanium alloys covering: SSC/SCC test procedures; reference environments for SSC and SCC testing; guidance on autoclave testing of CRAs; procedures for testing CRAs exposed to sulphur and H2S.
Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2014-08-11 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-02-10 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Standard Handbook of Petroleum and Natural Gas Engineering written by William C. Lyons and published by Elsevier. This book was released on 2011-03-15 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the Standard Handbook of Petroleum and Natural Gas Engineering provides you with the best, state-of-the-art coverage for every aspect of petroleum and natural gas engineering. With thousands of illustrations and 1,600 information-packed pages, this text is a handy and valuable reference. Written by over a dozen leading industry experts and academics, the Standard Handbook of Petroleum and Natural Gas Engineering provides the best, most comprehensive source of petroleum engineering information available. Now in an easy-to-use single volume format, this classic is one of the true "must haves" in any petroleum or natural gas engineer's library. A classic for the oil and gas industry for over 65 years! A comprehensive source for the newest developments, advances, and procedures in the petrochemical industry, covering everything from drilling and production to the economics of the oil patch Everything you need - all the facts, data, equipment, performance, and principles of petroleum engineering, information not found anywhere else A desktop reference for all kinds of calculations, tables, and equations that engineers need on the rig or in the office A time and money saver on procedural and equipment alternatives, application techniques, and new approaches to problems
Download or read book Corrosion Resistant Alloys for Oil and Gas Production written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2010-12-01 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for engineers and related professionals in the oil and gas production industries. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. It is also an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production. While the may use by technicians and others with limited formal technical training, it will be written on a level intended for use by engineers having had some exposure to college-level chemistry and some familiarity with materials and engineering design.
Download or read book Guidelines on Materials Requirements for Carbon and Low Alloy Steels written by William Moss and published by CRC Press. This book was released on 2019-02-11 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document defines the types of cracking and the conditions under which each can occur in carbon and low alloy steels in wet H2S-containing environments, specifies materials requirements necessary to prevent such cracking, and presents test methods for evaluating materials performance.
Download or read book Corrosion Resistant Alloys for Oil and Gas Production written by Chris Fowler and published by Woodhead Publishing. This book was released on 2020-09-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Resistant Alloys for Oil and Gas Production: Guidance on General Requirements and Test Methods for H2S Service, Volume 69, proposes test methods for assessing the environmental cracking resistance of Corrosion Resistant Alloys (CRAs) and provides a standard methodology for establishing the environmental cracking resistance of CRAs in H2S service. This revised volume discusses changes to the procedure for stress loading Bent Beam specimens, C-ring specimens, ISO 15156/NACE MR0175, and associated corrigenda. Includes procedures and background knowledge on H2S cracking tests Presents a discussion of H2S related cracking in corrosion resistant alloys Proposes test methods for assessing the environmental cracking resistance of CRAs Provides extensive background information relating to the use of CRAs in oil and gas production Includes a more accurate formula for calculating the strain to be applied for loading four point bend or "C" ring samples prior to testing
Download or read book Corrosion resistant Alloys in Oil and Gas Production written by and published by . This book was released on 1996 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum and Natural Gas Industries written by British Standards Institute Staff and published by . This book was released on 1915-09-30 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum technology, Gas technology, Metals, Alloys, Corrosion-resistant materials, Hydrogen sulfide, Petroleum extraction, Natural gas extraction, Environment (working), Steels, Corrosion-resistant steels, Stainless steels, Cracking, Stress corrosion, Hydrogen
Download or read book Microbiologically Influenced Corrosion in the Upstream Oil and Gas Industry written by Torben Lund Skovhus and published by CRC Press. This book was released on 2017-03-03 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microorganisms are ubiquitously present in petroleum reservoirs and the facilities that produce them. Pipelines, vessels, and other equipment used in upstream oil and gas operations provide a vast and predominantly anoxic environment for microorganisms to thrive. The biggest technical challenge resulting from microbial activity in these engineered environments is the impact on materials integrity. Oilfield microorganisms can affect materials integrity profoundly through a multitude of elusive (bio)chemical mechanisms, collectively referred to as microbiologically influenced corrosion (MIC). MIC is estimated to account for 20 to 30% of all corrosion-related costs in the oil and gas industry. This book is intended as a comprehensive reference for integrity engineers, production chemists, oilfield microbiologists, and scientists working in the field of petroleum microbiology or corrosion. Exhaustively researched by leaders from both industry and academia, this book discusses the latest technological and scientific advances as well as relevant case studies to convey to readers an understanding of MIC and its effective management.