Download or read book Seismic Risk and Engineering Decisions written by Cinna Lomnitz and published by Elsevier. This book was released on 2012-12-02 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Risk and Engineering Decisions attempts to bridge the gap in decision making between earthquake characteristics and structural behavior. The book begins by providing the background on earthquake generation and characteristics. It reviews the present state of matters in seismicity assessment and treats uncertainties explicitly. The impact of earthquakes on large bodies of water and structures is also discussed. These discussions set the stage for the final part of the book, which deals with the principles and implications of seismic design decision analysis. The book also delves into the selection of instruments for seismological research and engineering applications, with emphasis on widely used conventional seismological equipment. This book is intended to help experienced consulting engineers in assessing seismic risk and making rational decisions when locating and designing important engineering works and when drafting building codes and land use regulations. It will also provide advanced students of engineering with bases for benefiting from his future experience.

Download or read book Seismic Risk and Engineering Decisions written by Cinna Lomnitz and published by . This book was released on 1976 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Risk Assessment Modeling and Decision Support written by Ann Bostrom and published by Springer Science & Business Media. This book was released on 2008-02-10 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume integrate results from current research efforts in earthquake engineering with research from the larger risk assessment community. The authors include risk and hazard researchers from the major U.S. hazard and earthquake centers. The volume lays out a road map for future developments in risk modeling and decision support, and positions earthquake engineering research within the family of risk analysis tools and techniques.

Download or read book Improved Seismic Monitoring Improved Decision Making written by National Research Council and published by National Academies Press. This book was released on 2006-01-04 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improved Seismic Monitoringâ€"Improved Decision-Making, describes and assesses the varied economic benefits potentially derived from modernizing and expanding seismic monitoring activities in the United States. These benefits include more effective loss avoidance regulations and strategies, improved understanding of earthquake processes, better engineering design, more effective hazard mitigation strategies, and improved emergency response and recovery. The economic principles that must be applied to determine potential benefits are reviewed and the report concludes that although there is insufficient information available at present to fully quantify all the potential benefits, the annual dollar costs for improved seismic monitoring are in the tens of millions and the potential annual dollar benefits are in the hundreds of millions.

Download or read book Seismic Hazard and Risk Analysis written by Jack Baker and published by Cambridge University Press. This book was released on 2021-10-21 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic hazard and risk analyses underpin the loadings prescribed by engineering design codes, the decisions by asset owners to retrofit structures, the pricing of insurance policies, and many other activities. This is a comprehensive overview of the principles and procedures behind seismic hazard and risk analysis. It enables readers to understand best practises and future research directions. Early chapters cover the essential elements and concepts of seismic hazard and risk analysis, while later chapters shift focus to more advanced topics. Each chapter includes worked examples and problem sets for which full solutions are provided online. Appendices provide relevant background in probability and statistics. Computer codes are also available online to help replicate specific calculations and demonstrate the implementation of various methods. This is a valuable reference for upper level students and practitioners in civil engineering, and earth scientists interested in engineering seismology.

Download or read book Risk Assessment Modeling and Decision Support written by Ann Bostrom and published by Springer. This book was released on 2009-09-02 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume integrate results from current research efforts in earthquake engineering with research from the larger risk assessment community. The authors include risk and hazard researchers from the major U.S. hazard and earthquake centers. The volume lays out a road map for future developments in risk modeling and decision support, and positions earthquake engineering research within the family of risk analysis tools and techniques.

Download or read book Handbook of Seismic Risk Analysis and Management of Civil Infrastructure Systems written by S Tesfamariam and published by Elsevier. This book was released on 2013-04-30 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes represent a major risk to buildings, bridges and other civil infrastructure systems, causing catastrophic loss to modern society. Handbook of seismic risk analysis and management of civil infrastructure systems reviews the state of the art in the seismic risk analysis and management of civil infrastructure systems. Part one reviews research in the quantification of uncertainties in ground motion and seismic hazard assessment. Part twi discusses methodologies in seismic risk analysis and management, whilst parts three and four cover the application of seismic risk assessment to buildings, bridges, pipelines and other civil infrastructure systems. Part five also discusses methods for quantifying dependency between different infrastructure systems. The final part of the book considers ways of assessing financial and other losses from earthquake damage as well as setting insurance rates. Handbook of seismic risk analysis and management of civil infrastructure systems is an invaluable guide for professionals requiring understanding of the impact of earthquakes on buildings and lifelines, and the seismic risk assessment and management of buildings, bridges and transportation. It also provides a comprehensive overview of seismic risk analysis for researchers and engineers within these fields. This important handbook reviews the wealth of recent research in the area of seismic hazard analysis in modern earthquake design code provisions and practices Examines research into the analysis of ground motion and seismic hazard assessment, seismic risk hazard methodologies Addresses the assessment of seismic risks to buildings, bridges, water supply systems and other aspects of civil infrastructure

Download or read book Seismic Hazard and Risk Assessment written by Radu Vacareanu and published by Springer. This book was released on 2018-03-21 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the best contributions presented during the 6th National Conference on Earthquake Engineering and the 2nd National Conference on Earthquake Engineering and Seismology - 6CNIS & 2CNISS, that took place on June 14-17, 2017 in Bucharest - Romania, at the Romanian Academy and Technical University of Civil Engineering of Bucharest. The book offers an updated overview of seismic hazard and risk assessment activities, with an emphasis on recent developments in Romania, a very challenging case study because of its peculiar intermediate-depth seismicity and evolutive code-compliant building stock. Moreover, the book collects input of renowned scientists and professionals from Germany, Greece, Italy, Japan, Netherlands, Portugal, Romania, Spain, Turkey and United Kingdom.The content of the book focuses on seismicity of Romania, geotechnical earthquake engineering, structural analysis and seismic design regulations, innovative solutions for seismic protection of building structures, seismic risk evaluation, resilience-based assessment of structures and management of emergency situations. The sub-chapters consist of the best papers of 6CNIS & 2CNISS selected by the International Advisory and Scientific Committees. The book is targeted at researchers and experts in seismic hazard and risk, evaluation and rehabilitation of buildings and structures, insurers and re-insurers, and decision makers in the field of emergency situations and recovery activities.

Download or read book Seismic Hazard and Risk Analysis written by Robin K. McGuire and published by . This book was released on 2004 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the twenty-sixth volume in the Earthquake Engineering Research Institute's series, Connections: The EERI Oral History Series. EERI began this series to preserve the recollections of some of those who have had pioneering careers in the field of earthquake engineering.Mete Sozen (1932-2018) is the Karl H. Kettelhut Distinguished Professor Emeritus of Civil Engineering at Purdue University, Indiana, United States.Besides his academic interest in the development of design codes for concrete structures, Sozen is notable for his contributions to the official post 9/11-government studies of terrorist attacks, including the Oklahoma City bombing, and The Pentagon. Sozen also led a team that created an engineering simulation of American Airlines Flight 11 crashing into the North Tower of the World Trade Center. The computer-animated visualizations were made entirely from the simulation data. He was elected to the National Academy of Engineering in 1977 for contributions to understanding the structural design and behavior of buildings and bridges subjected to earthquake motions.Sozen received his undergraduate education at Robert College (Turkey, 1951) and his master's (1952) and doctoral degrees (1957) from the University of Illinois at Urbana-Champaign.

Download or read book Acceptable Risk Processes written by Craig Taylor and published by ASCE Publications. This book was released on 2002-01-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Council on Disaster Reduction and the Technical Council on Lifeline Earthquake Engineering of ASCE. This TCLEE Monograph provides engineers and decision makers with tools to help them better understand acceptable risk processes and then develop risk reduction strategies and implement mitigation actions to reduce lifeline losses from future earthquakes. The disruption of lifelines from natural hazards has a direct impact on the world's regional economies and the health of their citizens. Therefore, it is important to understand what natural hazards are, how they can affect infrastructure lifelines, and what can be done to minimize their impact. These three elements, in turn, influence decisions that involve acceptable risk processes. The topic of "acceptable risk" provides one way of bringing integrated systems risk evaluations for disaster explicitly into a decision-making context. Topics include technical issues; risk criteria issues; and communication, administration, and regulation issues.

Download or read book Advances in Earthquake Engineering for Urban Risk Reduction written by S. Tanvir Wasti and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes affecting urban areas can lead to catastrophic situations and hazard mitigation requires preparatory measures at all levels. Structural assessment is the diagnosis of the seismic health of buildings. Assessment is the prelude to decisions about rehabilitation or even demolition. The scale of the problem in dense urban settings brings about a need for macro seismic appraisal procedures because large numbers of existing buildings do not conform to the increased requirements of new earthquake codes and specifications or have other deficiencies. It is the vulnerable buildings - liable to cause damage and loss of life - that need immediate attention and urgent appraisal in order to decide if structural rehabilitation and upgrading are feasible. Current economic, efficient and occupant-friendly rehabilitation techniques vary widely and include the application either of precast concrete panels or layers, strips and patches of fiber reinforced polymers (FRP) in strategic locations. The papers in this book, many by renowned authorities in earthquake engineering, chart new and vital directions of research and application in the assessment and rehabilitation of buildings in seismic regions. While several papers discuss the probabilistic prediction and quantification of structural damage, others present approaches related with the in-situ and occupant friendly upgrading of buildings and propose both economical and practical techniques to address the problem.

Download or read book SYNER G Systemic Seismic Vulnerability and Risk Assessment of Complex Urban Utility Lifeline Systems and Critical Facilities written by K. Pitilakis and published by Springer. This book was released on 2014-06-19 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: SYNER-G, a multidisciplinary effort funded by the European Union, allowed the development of an innovative methodological framework for the assessment of physical as well as socio-economic seismic vulnerability and risk at urban and regional level. The results of SYNER-G are presented in two books both published by Springer, the present and a second one, entitled “SYNER-G: Typology Definition and Fragility Functions for Physical Elements at Seismic Risk: Buildings, Lifelines, Transportation Networks and Critical Facilities”(*), which provides a comprehensive state-of-the-art of the fragility curves, an alternative way to express physical vulnerability of elements at risk. In this second volume of SYNER-G, the focus has been on presenting a unified holistic methodology for assessing vulnerability at systems level considering interactions between elements at risk (physical and non-physical) and between different systems. The proposed methodology and tool encompasses in an integrated fashion all aspects in the chain, from hazard to the vulnerability assessment of components and systems and to the socio-economic impacts of an earthquake, accounting for most relevant uncertainties within an efficient quantitative simulation scheme. It systematically integrates the most advanced fragility functions to assess the vulnerability of physical assets for buildings, utility systems, transportation networks and complex infrastructures such as harbours and hospitals. The increasing impact due to interactions between different components and systems is treated in a comprehensive way, providing specifications for each network and infrastructure. The proposed socio-economic model integrates social vulnerability into the physical systems modelling approaches providing to decision makers with a dynamic platform to capture post disaster emergency issues like shelter demand and health impact decisions. Application examples at city and regional scale have provided the necessary validation of the methodology and are also included in the book. The present volume, with its companion volume on fragility functions, represent a significant step forward in the seismic vulnerability and risk assessment of complex interacting urban and regional systems and infrastructures. These volumes are not only of interest to scientists and engineers but also to the insurance industry, decision makers and practitioners in the sector of civil protection and seismic risk management. (*) Pitilakis K, Crowley E, Kaynia A (eds) (2014) SYNER-G: Typology definition and fragility functions for physical elements at seismic risk, Series: Geotechnical, Geological and Earthquake Engineering 27, ISBN 978-94-007-7872-6, Springer Science+Business Media, Dordrecht.

Download or read book Improved Seismic Monitoring Improved Decision Making written by National Research Council and published by National Academies Press. This book was released on 2006-02-04 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improved Seismic Monitoringâ€"Improved Decision-Making, describes and assesses the varied economic benefits potentially derived from modernizing and expanding seismic monitoring activities in the United States. These benefits include more effective loss avoidance regulations and strategies, improved understanding of earthquake processes, better engineering design, more effective hazard mitigation strategies, and improved emergency response and recovery. The economic principles that must be applied to determine potential benefits are reviewed and the report concludes that although there is insufficient information available at present to fully quantify all the potential benefits, the annual dollar costs for improved seismic monitoring are in the tens of millions and the potential annual dollar benefits are in the hundreds of millions.

Download or read book Seismic Hazard and Risk Analysis written by Jack Baker and published by Cambridge University Press. This book was released on 2021-10-21 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic hazard and risk analyses underpin the loadings prescribed by engineering design codes, the decisions by asset owners to retrofit structures, the pricing of insurance policies, and many other activities. This is a comprehensive overview of the principles and procedures behind seismic hazard and risk analysis. It enables readers to understand best practises and future research directions. Early chapters cover the essential elements and concepts of seismic hazard and risk analysis, while later chapters shift focus to more advanced topics. Each chapter includes worked examples and problem sets for which full solutions are provided online. Appendices provide relevant background in probability and statistics. Computer codes are also available online to help replicate specific calculations and demonstrate the implementation of various methods. This is a valuable reference for upper level students and practitioners in civil engineering, and earth scientists interested in engineering seismology.

Download or read book Protection of Built Environment Against Earthquakes written by Matjaž Dolšek and published by Springer Science & Business Media. This book was released on 2011-08-16 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current knowledge and state-of-the-art developments in topics related to the seismic performance and risk assessment of different types of structures and building stock are addressed in the book, with emphasis on probabilistic methods. The first part addresses the global risk components, as well as seismic hazard and ground motions, whereas the second, more extensive part presents recent advances in methods and tools for the seismic performance and risk assessment of structures. The book contains examples of steel, masonry and reinforced concrete buildings, as well as some examples related to various types of infrastructure, such as bridges and concrete gravity dams. The book's aim is to make a contribution towards the mitigation of seismic risk by presenting advanced methods and tools which can be used to achieve well-informed decision-making, this being the key element for the future protection of the built environment against earthquakes. Audience: This book will be of interest to researchers, postgraduate students and practicing engineers working in the fields of natural hazards, earthquake, structural and geotechnical engineering, and computational mechanics, but it may also be attractive to other experts working in the fields related to social and economic impact of earthquakes.

Download or read book Performance Based Seismic Engineering Vision for an Earthquake Resilient Society written by Matej Fischinger and published by Springer. This book was released on 2014-07-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bled workshops have traditionally produced reference documents providing visions for the future development of earthquake engineering as foreseen by leading researchers in the field. The participants of the 2011 workshop built on the tradition of these events initiated by Professors Fajfar and Krawinkler to honor their important research contributions and have now produced a book providing answers to crucial questions in today’s earthquake engineering: “What visible changes in the design practice have been brought about by performance-based seismic engineering? What are the critical needs for future advances? What actions should be taken to respond to those needs?” The key answer is that research interests should go beyond the narrow technical aspects and that the seismic resilience of society as a whole should become an essential part of the planning and design process. The book aims to provide essential guidelines for researchers, professionals and students in the field of earthquake engineering. It will also be of particular interest for all those working at insurance companies, governmental, civil protection and emergency management agencies that are responsible for assessing and planning community resilience. The introductory chapter of the book is based on the keynote presentation given at the workshop by the late Professor Helmut Krawinkler. As such, the book includes Helmut’s last and priceless address to the engineering community, together with his vision and advice for the future development of performance-based design, earthquake engineering and seismic risk management.

Download or read book Seismic Risk Assessment and Retrofitting written by Alper Ilki and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many more people are coming to live in earthquake-prone areas, especially urban ones. Many such areas contain low-rise, low-cost housing, while little money is available to retrofit the buildings to avoid total collapse and thus potentially save lives. The lack of money, especially in developing countries, is exacerbated by difficulties with administration, implementation and public awareness. The future of modern earthquake engineering will come to be dominated by new kinds of measuring technologies, new materials developed especially for low-rise, low-cost buildings, simpler and thus lower cost options for retrofitting, cost cutting and raising public awareness. The book covers all the areas involved in this complex issue, from the prevention of total building collapse, through improvement techniques, to legal, financial, taxation and social issues. The contributors have all made valuable contributions in their own particular fields; all of them are or have been closely involved with the issues that can arise in seismic zones in any country. The recent research results published here offer invaluable pointers to practicing engineers and administrators, as well as other scientists whose work involves saving the lives and property of the many millions of people who live and work in hazardous buildings.