Download or read book Seismic Response of Multi storey Cross laminated Timber Buildings written by Cagatay Demirci and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Displacement based seismic design for multi storey cross laminated timber buildings written by Hummel, Johannes and published by kassel university press GmbH. This book was released on 2017 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key Terms: cross laminated timber, displacement-based seismic design, time history analysis, multi-storey timber structures, hysteretic behaviour

Download or read book Seismic Response and Design of Subassemblies for Multi storey Prestressed Timber Buildings written by Md Asif Iqbal and published by . This book was released on 2011 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design and Testing of Rocking Cross Laminated Timber Walls written by Ryan S. Ganey and published by . This book was released on 2015 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass timber is an attractive alternative to nonrenewable materials such as concrete and steel. High rise timber buildings have not been built in high seismic areas due to lack of ductile lateral force resisting systems that can have large seismic force reduction factors. Seismically resilient, lateral systems for tall timber buildings can be created by combining cross laminated timber (CLT) panels with post-tensioned (PT) self-centering technology. The concept features a system of stacked CLT walls where particular stories are equipped to rock against the above and below floor diaphragms through PT connections and are supplemented with mild steel U-shaped flexural plate energy dissipation devices (UFPs). Experiments were conducted to better understand rocking CLT wall behavior and seismic performance. The testing program consisted of five single wall tests with varying PT areas, initial tensioning force, CLT panel composition, and rocking surface and one coupled wall test with UFPs as the coupling devices. The walls were tested with a quasi-static reverse-cyclic load protocol. The experimental results showed a ductile response and good energy dissipation qualities. To evaluate the feasibility and performance of the rocking CLT wall system, prototype designs were developed for 8 to 14 story buildings in Seattle using a performance-based seismic design procedure. Performance was assessed using numerical simulations performed in OpenSees for ground motions representing a range of seismic hazards. The results were used to validate the performance-based seismic design procedure for tall timber buildings with rocking CLT walls.

Download or read book CLT Handbook written by Erol Karacabeyli and published by . This book was released on 2013-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Use of Timber in Tall Multi Storey Buildings written by Ian Smith and published by International Association for Bridge and Structural Engineering. This book was released on 2014-01-01 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the dawn of civilization, timber has been a primary material for achieving great structural engineering feats. Yet during the late 19th century and most of the 20th century it lost currency as a preferred material for construction of large and tall multi-storey building superstructures. This Structural Engineering Document (SED) addresses a reawakening of interest in timber and timber-based products as primary con-struction materials for relatively tall, multi-storey buildings. Emphasis throughout is on holistically addressing various aspects of performance of complete systems, reflecting that major gaps in knowhow relate to design concepts rather than technical information about timber as a material. Special con-sideration is given to structural form, fire vulnerability, and durability aspects for attaining desired building performance over lifespans that can be centuries long.

Download or read book 100 Projects UK CLT written by Waugh Thistleton Architects and published by . This book was released on 2018 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The benefits of cross-laminated timber (CLT) are clear: building in timber is quick, clean, and easy. It can be achieved with a measured accuracy and lack of noise, waste, or need for material storage space. This book is a study of the 100 of the most significant buildings constructed from CLT in the United Kingdom over the past 15 years. Authors Andrew Waugh and Anthony Thistleton of Waugh Thistleton Architects have contacted a wide range of individuals and businesses to interview them about their experiences building in CLT to help inform this book." -- Thinkwood.com.

Download or read book The Seismic Response of Multi storey Buildings written by R. C. Fenwick and published by . This book was released on 1991 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Timber Engineering written by Sven Thelandersson and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber construction is one of the most prevalent methods of constructing buildings in North America and an increasingly significant method of construction in Europe and the rest of the world. Timber Engineering deals not only with the structural aspects of timber construction, structural components, joints and systems based on solid timber and engineered wood products, but also material behaviour and properties on a wood element level. Produced by internationally renowned experts in the field, this book represents the state of the art in research on the understanding of the material behaviour of solid wood and engineered wood products. There is no comparable compendium currently available on the topic - the subjects represented include the most recent phenomena of timber engineering and the newest development of practice-related research. Grouped into three different sections, 'Basic properties of wood-based structural elements', 'Design aspects on timber structures' and 'Joints and structural assemblies', this book focuses on key issues in the understanding of: timber as a modern engineered construction material with controlled and documented properties the background for design of structural systems based on timber and engineered wood products the background for structural design of joints in structural timber systems Furthermore, this invaluable book contains advanced teaching material for all technical schools and universities involved in timber engineering. It also provides an essential resource for timber engineering students and researchers, as well as practicing structural and civil engineers.

Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam

Download or read book NEHRP Recommended Provisions National Earthquake Hazards Reduction Program for Seismic Regulations for New Buildings and Other Structures Commentary written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Modeling and Seismic Performance of Post tensioned Cross laminated Timber Rocking Wall Systems written by Alex William Wilson and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Both the high- and reduced-order model compared well against experimental tests for both single and coupled PT CLT rocking walls. Both archetypes were able to meet predetermined performance objectives and code acceptance criteria, while the assessed responses of the low- and mid-rise archetype proved to be more sensitive to ground motion pulses and far-field motions, respectively. For all assessed intensity levels, both buildings showed that nonstructural repair could be performed at a cost cheaper than total replacement. The low- and mid-rise building exhibited better nonstructural economic performance in high and low intensity level events, respectively

Download or read book A study on seismic response of reinforced structures retrofitted with fluid viscous dampers in shear walls written by Sachin Kuckian and published by GRIN Verlag. This book was released on 2019-08-05 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2015 in the subject Engineering - Geotechnology, grade: 9.44, , course: Masters (Structural Engineering), language: English, abstract: The present study investigates the seismic behavior of multi-story building using damping devices strategically located within the lateral load resisting elements. It concentrates on a retrofitting strategy with passive energy dissipation device known as Fluid Viscous Damper (FVD) which will be applicable to new design as well as retrofitting existing buildings to ensure seismic safety by fitting damping devices which can transform a wall panel into a damping element. The first study involves analysis of a nine-story model having cut-outs and the use of the dampers of different configuration in these structures. The second study involves the use the diagonal brace configuration dampers provided in the cutout sections of 2D 9, 18, 27 storey structures and 3D 27 storey with core wall structure at three consecutive story levels each. For the second study, the cut out locations is varied depending on their relative positions. The relative position is the ratio of the total height of the structure to the upper edge of the topmost cut-out. These structures were initially modeled and time history analysis was performed on the structure without FVD and the structure retrofitted with FVD. Three different ground motions were used for the analysis. Results of the un- retrofitted structures are then compared with a retrofitted structure in terms of peak story displacements, roof accelerations, and pseudo-spectral accelerations. Study shows that there has been a significant reduction in seismic demands for a structure retrofitted with FVD in terms of peak storey displacements, pseudo-spectral accelerations and roof accelerations when the dampers are placed at lower three cut outs i.e. with high relative position. It is also observed that damping coefficient value obtained is least for upper toggle-brace configuration out of the four different damper configurations and with maximum reduction compared to other configurations. For modeling and analysis purpose the software SAP2000® is used. Through the study it could be concluded that FVD significantly reduces the seismic demands of the structure in terms of peak storey displacements, pseudo-spectral accelerations and roof accelerations. This suggests that FVDs can be efficiently used in retrofitting. Also damping coefficient value obtained is least for upper toggle-brace configuration out of the four different damper configurations suggesting this is the most efficient configuration for retrofitting.

Download or read book Displacement based Seismic Design of Structures written by M. J. N. Priestley and published by Iuss Press. This book was released on 2007 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Displacement-Based Seismic Design of Structures is a book primarily directed towards practicing structural designers who are interested in applying performance-based concepts to seismic design. Since much of the material presented in the book has not been published elsewhere, it will also be of considerable interest to researchers, and to graduate and upper-level undergraduate students of earthquake engineering who wish to develop a deeper understanding of how design can be used to control seismic response. The design philosophy is based on determination of the optimum structural strength to achieve a given performance limit state, related to a defined level of damage, under a specified level of seismic intensity. Emphasis is also placed on how this strength is distributed through the structure. This takes two forms: methods of structural analysis and capacity design. It is shown that equilibrium considerations frequently lead to a more advantageous distribution of strength than that resulting from stiffness considerations. Capacity design considerations have been re-examined, and new and more realistic design approaches are presented to insure against undesirable modes of inelastic deformation. The book considers a wide range of structural types, including separate chapters on frame buildings, wall buildings, dual wall/frame buildings, masonry buildings, timber structures, bridges, structures with isolation or added damping devices, and wharves. These are preceded by introductory chapters discussing conceptual problems with current force-based design, seismic input for displacement-based design, fundamentals of direct displacement-based design, and analytical tools appropriate for displacement-based design. The final two chapters adapt the principles of displacement-based seismic design to assessment of existing structures, and present the previously developed design information in the form of a draft building code. The text is illustrated by copious worked design examples (39 in all), and analysis aids are provided in the form of a CD containing three computer programs covering moment-curvature analysis (Cumbia), linear-element-based inelastic time-history analysis (Ruaumoko), and a general fibre-element dynamic analysis program (SeismoStruct). The design procedure developed in this book is based on a secant-stiffness (rather than initial stiffness) representation of structural response, using a level of damping equivalent to the combined effects of elastic and hysteretic damping. The approach has been fully verified by extensive inelastic time history analyses, which are extensively reported in the text. The design method is extremely simple to apply, and very successful in providing dependable and predictable seismic response. Authors Bios M.J.N.Priestley Nigel Priestley is Professor Emeritus of the University of California San Diego, and co-Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS), Pavia, Italy. He has published more than 450 papers, mainly on earthquake engineering, and received numerous awards for his research. He holds honorary doctorates from ETH, Zurich, and Cujo, Argentina. He is co-author of two previous seismic design books “Seismic Design of Concrete and Masonry Buildings” and “Seismic Design and Retrofit of Bridges”, that are considered standard texts on the subjects. G.M.Calvi Michele Calvi is Professor of the University of Pavia and Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS) of Pavia. He has published more than 200 papers and is co-author of the book “Seismic Design and Retrofit of Bridges”, that is considered a standard text on the subject, has been involved in important construction projects worldwide, such as the Rion Bridge in Greece and the upgrading of the Bolu Viaduct in Turkey, and is coordinating several international research projects. M.J.Kowalsky Mervyn Kowalsky is Associate Professor of Structural Engineering in the Department of Civil, Construction, and Environmental Engineering at North Carolina State University and a member of the faculty of the ROSE School. His research, which has largely focused on the seismic behaviour of structures, has been supported by the National Science Foundation, the North Carolina and Alaska Departments of Transportation, and several industrial organizations. He is a registered Professional Engineer in North Carolina and an active member of several national and international committees on Performance-Based Seismic Design.

Download or read book Numerical Study on the Seismic Performance of Hybrid Steel Moment Frames with CLT Balloon Shear Walls written by Mehdi Khajehpour and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A proposed hybrid lateral load resisting system combining a moderately ductile steel moment resisting frame (SMRF) with Cross-laminated Timber (CLT) balloon-framed shear walls is investigated on 8, 12 and 16-storey case-study buildings using equivalent static, linear dynamic (modal), nonlinear static (push-over) and nonlinear dynamic (time history) analyses. First, a SMRF is designed using ETABS, then the hybrid structures are analysed in OpenSees. By adding the CLT shear wall to steel moment frame, the period of structure decreased and its stiffness increased. The time history analyses result revealed that by adding the CLT shear wall the maximum drift decreased, while the maximum base shear in hybrid structure slightly increased. The hold down uplift forces under earthquake records are reported and compared to each other. Using push-over capacity-curves, a ductility reduction factor of 3.6, an over strength factor of 1.57 and a seismic response modification factor of 5.67 are derived.

Download or read book Performance Based Seismic Design of Cross Laminated Timber Tall Buildings with Inter story Isolation System written by Vahab Bolvardi and published by . This book was released on 2018 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of SECON 21 written by Giuseppe Carlo Marano and published by Springer Nature. This book was released on 2021-09-03 with total page 1127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the International Conference on Structural Engineering and Construction Management (SECON’21), held on 12-15 May 2021. The meeting served as a fertile platform for discussion, sharing sound knowledge and introducing novel ideas on issues related to sustainable construction and design for the future. The respective contributions address various aspects of numerical modeling and simulation in structural engineering, structural dynamics and earthquake engineering, advanced analysis and design of foundations, BIM, building energy management, and technical project management. Accordingly, the book offers a valuable, up-to-date tool and essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.