Download or read book Hidden Cities written by World Health Organization. Centre for Health Development and published by World Health Organization. This book was released on 2010 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The joint WHO and UN-HABITAT report, Hidden cities: unmasking and overcoming health inequities in urban settings, is being released at a turning point in human history. For the first time ever, the majority of the world's population is living in cities, and this proportion continues to grow. Putting this into numbers, in 1990 fewer than 4 in 10 people lived in urban areas. In 2010, more than half live in cities, and by 2050 this proportion will grow to 7 out of every 10 people. The number of urban residents is growing by nearly 60 million every year. This demographic transition from rural to urban, or urbanization, has far-reaching consequences. Urbanization has been associated with overall shifts in the economy, away from agriculture-based activities and towards mass industry, technology and service. High urban densities have reduced transaction costs, made public spending on infrastructure and services more economically viable, and facilitated generation and diffusion of knowledge, all of which have fuelled economic growth"--Page ix.

Download or read book Modern Steel Construction written by and published by . This book was released on 2007 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Induced Structural Pounding written by Robert Jankowski and published by Springer. This book was released on 2015-03-14 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books analyzes different approaches to modeling earthquake-induced structural pounding and shows the results of the studies on collisions between buildings and between bridge segments during ground motions. Aspects related to the mitigation of pounding effects as well as the design of structures prone to pounding are also discussed. Earthquake-induced structural pounding between insufficiently separated buildings, and between bridge segments, has been repeatedly observed during ground motions. The reports after earthquakes indicate that it may result in limited local damage in the case of moderate seismic events, or in considerable destruction or even the collapse of colliding structures during severe ground motions. Pounding in buildings is usually caused by the differences in dynamic properties between structures, which make them vibrate out-of-phase under seismic excitation. In contrast, in the case of longer bridge structures, it is more often the seismic wave propagation effect that induces collisions between superstructure segments during earthquakes.

Download or read book Friction Damped Braced Frames written by Parvaneh Baktash and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NEHRP Guidelines for the Seismic Rehabilitation of Buildings written by and published by . This book was released on 1997 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recommended Seismic Design Criteria for New Steel Moment Frame Buildings FEMA 350 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended design criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.

Download or read book Engineering Journal written by and published by . This book was released on 2003 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Behavior of Steel Storage Pallet Racking Systems written by Carlo Andrea Castiglioni and published by Springer. This book was released on 2016-02-04 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main outcomes of the first European research project on the seismic behavior of adjustable steel storage pallet racking systems. In particular, it describes a comprehensive and unique set of full-scale tests designed to assess such behavior. The tests performed include cyclic tests of full-scale rack components, namely beam-to-upright connections and column base connections; static and dynamic tests to assess the friction factor between pallets and rack beams; full-scale pushover and pseudodynamic tests of storage racks in down-aisle and cross-aisle directions; and full-scale dynamic tests on two-bay, three-level rack models. The implications of the findings of this extensive testing regime on the seismic behavior of racking systems are discussed in detail, highlighting e.g. the confirmation that under severe dynamic conditions “sliding” is the main factor influencing rack response. This work was conceived during the development of the SEISRACKS project. Its outcomes will contribute significantly to increasing our knowledge of the structural behavior of racks under earthquake conditions and should inform future rack design.

Download or read book Performance Based Seismic Design for Tall Buildings written by Ramin Golesorkhi and published by . This book was released on 2017-10-30 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance-Based Seismic Design (PBSD) is a structural design methodology that has become more common in urban centers around the world, particularly for the design of high-rise buildings. The primary benefit of PBSD is that it substantiates exceptions to prescribed code requirements, such as height limits applied to specific structural systems, and allows project teams to demonstrate higher performance levels for structures during a seismic event.However, the methodology also involves significantly more effort in the analysis and design stages, with verification of building performance required at multiple seismic demand levels using Nonlinear Response History Analysis (NRHA). The design process also requires substantial knowledge of overall building performance and analytical modeling, in order to proportion and detail structural systems to meet specific performance objectives.This CTBUH Technical Guide provides structural engineers, developers, and contractors with a general understanding of the PBSD process by presenting case studies that demonstrate the issues commonly encountered when using the methodology, along with their corresponding solutions. The guide also provides references to the latest industry guidelines, as applied in the western United States, with the goal of disseminating these methods to an international audience for the advancement and expansion of PBSD principles worldwide.

Download or read book Recent Advances and Applications of Hybrid Simulation written by Wei Song and published by Frontiers Media SA. This book was released on 2021-01-13 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Resilience and Sustainability of Civil Infrastructures under Extreme Loads written by Zheng Lu and published by MDPI. This book was released on 2019-08-26 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many regions worldwide which are susceptible to extreme loads such as earthquakes. These can cause loss of life and adverse impacts on civil infrastructures, the environment, and communities. A series of methods and measures have been used to mitigate the effects of these extreme loads. The adopted approaches and methods must enable civil structures to be resilient and sustainable. Therefore, to reduce damage and downtime in addition to protecting life and promoting safety, new resilient structure technologies must be proposed and developed. This special issue book focuses on methods of enhancing the sustainability and resilience of civil infrastructures in the event of extreme loads (e.g., earthquakes). This book contributes proposals of and theoretical, numerical, and experimental research on new and resilient civil structures and their structural performance under extreme loading events. These works will certainly play a significant role in promoting the application of new recoverable structures. Moreover, this book also introduces some case studies discussing the implementation of low-damage structural systems in buildings as well as articles on the development of design philosophies and performance criteria for resilient buildings and new sustainable communities.

Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.

Download or read book Earthquake Engineering written by Yousef Bozorgnia and published by CRC Press. This book was released on 2004-05-11 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-contributor book provides comprehensive coverage of earthquake engineering problems, an overview of traditional methods, and the scientific background on recent developments. It discusses computer methods on structural analysis and provides access to the recent design methodologies and serves as a reference for both professionals and res

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Rehabilitation of Existing Buildings written by American Society of Civil Engineers and published by ASCE Publications. This book was released on 2007 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 41-06 presents the latest generation of performance-based seismic rehabilitation methodology.

Download or read book Performance based Plastic Design written by Subhash Chandra Goel and published by . This book was released on 2008-01-01 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Behaviour of Steel Structures in Seismic Areas written by Federico Mazzolani and published by CRC Press. This book was released on 2012-01-31 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behaviour of Steel Structures in Seismic Areas is a comprehensive overview of recent developments in the field of seismic resistant steel structures. It comprises a collection of papers presented at the seventh International Specialty Conference STESSA 2012 (Santiago, Chile, 9-11 January 2012), and includes the state-of-the-art in both theore