Download or read book Seismic Performance of Soil Foundation Structure Systems written by Nawawi Chouw and published by CRC Press. This book was released on 2017-08-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Performance of Soil-Foundation-Structure Systems presents invited papers presented at the international workshop (University of Auckland, New Zealand, 21-22 November 2016). This international workshop brought together outstanding work in earthquake engineering that embraces a holistic consideration of soilfoundation-structure systems. For example, the diversity of papers in this volume is represented by contributions from the fields of shallow foundation in liquefiable soil, spatially distributed lifelines, bridges, clustered structures (see photo on front cover), sea floor seismic motion, multi-axial ground excitation, deep foundations, soil-foundation-structurefluid interaction, liquefaction-induced settlement and uplift with SFSI. A fundamental knowledge gap is manifested by the isolated manner geotechnical and structural engineers work. A holistic consideration of soil-foundation-structures systems is only possible if civil engineers work collaboratively to the mutual benefit of all disciplines. Another gap occurs by the retarded application of up-to-date research findings in engineering design practices. Seismic Performance of Soil-Foundation-Structure Systems is the outcome from the recognized need to close this gap, since it has been observed that a considerable delay exists between published research findings and application of the principles revealed by the research. Seismic Performance of Soil-Foundation-Structure Systems will be helpful in developing more understanding of the complex nature of responses these systems present under strong earthquakes, and will assist engineers in closing the gaps identified above.

Download or read book Seismic Soil Foundation Structure Interaction in Urban Environments written by Nicholas Wade Trombetta and published by . This book was released on 2013 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interactions between a structure, its foundation, and the surrounding soil during an earthquake are referred to as soil-foundation-structure interaction (SFSI). The interactions between multiple structures, and their foundations, through the surrounding soil are collectively known as structure-soil-structure interaction (SSSI). Modern design codes in use in the United States, and abroad, provide guidance for considering SFSI during the seismic design of structural systems. However, these same codes do not provide any guidance for considering SSSI. This situation is a direct result of the current paucity of research into the effects of SSSI on structural performance. This dissertation describes the results of four centrifuge experiments designed to study the influence of SSSI on the seismic performance of building-foundation systems. Following these experiments, numerical models were developed and their efficiency at reproducing measured response evaluated. The experimental program involved two pairs of tests. During Test-1 and Test-2, the SFSI and SSSI-influenced responses of two three-dimensional inelastic frame structures were recorded. During Test-3 and Test-4, the interactions between an inelastic frame structure and an elastic rocking wall arranged in a variety of orientations were recorded. In each of the pair of test series, one configuration was devoted to the evaluation of the response of the model frame structures far from any neighboring structure. Ultimately, the experimental results demonstrate that when structures are placed next to each other, the seismic demands in inelastic frame structures can increase. As such, seismic structural performance may be negatively impacted by SSSI. The tests reveal that footings of buildings placed nearest to other buildings can be physically restrained when loaded towards the other building -- a physical mechanism that had not previously been observed. This asymmetrical physical restraint resulted in a stiffened hysteretic response of footings nearest to adjacent buildings and nominal increases in seismic demands to superstructure elements. It is also demonstrated that wave-based analytical solutions to the SSSI problem alone are not adequate for modeling the interactions between building-foundation systems with highly nonlinear foundation responses. During the numerical phase of this research, available tools for modeling SFSI effects (i.e., absent the effects of neighboring structures) in OpenSees were first refined. The shallowFoundationGen command was redeveloped to give the user greater flexibility. Subsequently, it was demonstrated that the updated modeling technique provides an adequate means to model the experimentally observed coupling of the vertical footing force and overturning moment load combinations for shallow foundations attached to inelastic frame structures. Finally, an available methodology for modeling wave-based SSSI effects was implemented in OpenSees and its capability to predict the experimentally measured seismic demands of an SSSI-influenced inelastic structure was evaluated. Ultimately, it is concluded that the use of foundation-to-foundation connection springs, which are based on wave-based solutions, is insufficient for capturing the seismic response of adjacent structures with highly nonlinear individual SFSI responses.

Download or read book Soil Foundation Structure Interaction written by Rolando P. Orense and published by CRC Press. This book was released on 2010-07-20 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil-Foundation-Structure Interaction contains selected papers presented at the International Workshop on Soil-Foundation-Structure Interaction held in Auckland, New Zealand from 26-27 November 2009. The workshop was the venue for an international exchange of ideas, disseminating information about experiments, numerical models and practical en

Download or read book Seismic Performance of Soil Foundation Structure Systems written by Nawawi Chouw and published by CRC Press. This book was released on 2017-08-25 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Performance of Soil-Foundation-Structure Systems presents invited papers presented at the international workshop (University of Auckland, New Zealand, 21-22 November 2016). This international workshop brought together outstanding work in earthquake engineering that embraces a holistic consideration of soilfoundation-structure systems. For example, the diversity of papers in this volume is represented by contributions from the fields of shallow foundation in liquefiable soil, spatially distributed lifelines, bridges, clustered structures (see photo on front cover), sea floor seismic motion, multi-axial ground excitation, deep foundations, soil-foundation-structurefluid interaction, liquefaction-induced settlement and uplift with SFSI. A fundamental knowledge gap is manifested by the isolated manner geotechnical and structural engineers work. A holistic consideration of soil-foundation-structures systems is only possible if civil engineers work collaboratively to the mutual benefit of all disciplines. Another gap occurs by the retarded application of up-to-date research findings in engineering design practices. Seismic Performance of Soil-Foundation-Structure Systems is the outcome from the recognized need to close this gap, since it has been observed that a considerable delay exists between published research findings and application of the principles revealed by the research. Seismic Performance of Soil-Foundation-Structure Systems will be helpful in developing more understanding of the complex nature of responses these systems present under strong earthquakes, and will assist engineers in closing the gaps identified above.

Download or read book Earthquake Geotechnical Engineering Design written by Michele Maugeri and published by Springer Science & Business Media. This book was released on 2014-02-03 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pseudo-static analysis is still the most-used method to assess the stability of geotechnical systems that are exposed to earthquake forces. However, this method does not provide any information about the deformations and permanent displacements induced by seismic activity. Moreover, it is questionable to use this approach when geotechnical systems are affected by frequent and rare seismic events. Incidentally, the peak ground acceleration has increased from 0.2-0.3 g in the seventies to the current value of 0.6-0.8 g. Therefore, a shift from the pseudo-static approach to performance-based analysis is needed. Over the past five years considerable progress has been made in Earthquake Geotechnical Engineering Design (EGED). The most recent advances are presented in this book in 6 parts. The evaluation of the site amplification is covered in Part I of the book. In Part II the evaluation of the soil foundation stability against natural slope failure and liquefaction is treated. In the following 3 Parts of the book the EGED for different geotechnical systems is presented as follows: the design of levees and dams including natural slopes in Part III; the design of foundations and soil structure interaction analysis in Part IV; underground structures in Part V. Finally in Part VI, new topics like the design of reinforced earth retaining walls and landfills are covered.

Download or read book Can Ground Densification Improve Seismic Performance of the Soil foundation structure System on Liquefiable Soils written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Reliability Methods written by O. Ditlevsen and published by Wiley. This book was released on 1996-06-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses probabilistic methods for the evaluation of structural reliability, including the theoretical basis of these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature of the uncertainties and their interplay is then gradually developed. The concepts presented are illustrated by numerous examples throughout the text. The modular approach of the book allows the reader to navigate through the different stages of the methods.

Download or read book Seismic Performance of Concrete Buildings written by Liviu Crainic and published by CRC Press. This book was released on 2012-12-10 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines and presents essential aspects of the behavior, analysis, design and detailing of reinforced concrete buildings subjected to strong seismic activity. Seismic design is an extremely complex problem that has seen spectacular development in the last decades. The present volume tries to show how the principles and methods of earthquake engineering can be applied to seismic analysis and design of reinforced concrete buildings. The book starts with an up-to-date presentation of fundamental aspects of reinforced concrete behavior quantified through constitutive laws for monotonic and hysteretic loading. Basic concepts of post-elastic analysis like plastic hinge, plastic length, fiber models, and stable and unstable hysteretic behaviour are, accordingly, defined and commented upon. For a deeper understanding of seismic design philosophy and of static and dynamic post-elastic analysis, seismic behavior of different types of reinforced concrete structures (frames, walls) is examined in detail. Next, up-to-date methods for analysis and design are presented. The powerful concept of structural system is defined and systematically used to explain the response to seismic activity, as well as the procedures for analysis and detailing of common building structures. Several case studies are presented. The book is not code-oriented. The structural design codes are subject to constant reevaluation and updating. Rather than presenting code provisions, this book offers a coherent system of notions, concepts and methods, which facilitate understanding and application of any design code. The content of this book is based mainly on the authors’ personal experience which is a combination of their teaching and research activity as well as their work in the private sector as structural designers. The work will serve to help students and researchers, as well as structural designers to better understand the fundamental aspects of behavior and analysis of reinforced concrete structures and accordingly to gain knowledge that will ensure a sound design of buildings.

Download or read book Seismic Isolation Structural Health Monitoring and Performance Based Seismic Design in Earthquake Engineering written by Azer A. Kasimzade and published by Springer. This book was released on 2018-08-13 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features chapters based on selected presentations from the International Congress on Advanced Earthquake Resistance of Structures, AERS2016, held in Samsun, Turkey, from 24 to 28 October 2016. It covers the latest advances in three widely popular research areas in Earthquake Engineering: Performance-Based Seismic Design, Seismic Isolation Systems, and Structural Health Monitoring. The book shows the vulnerability of high-rise and seismically isolated buildings to long periods of strong ground motions, and proposes new passive and semi-active structural seismic isolation systems to protect against such effects. These systems are validated through real-time hybrid tests on shaking tables. Structural health monitoring systems provide rapid assessment of structural safety after an earthquake and allow preventive measures to be taken, such as shutting down the elevators and gas lines, before damage occurs. Using the vibration data from instrumented tall buildings, the book demonstrates that large, distant earthquakes and surface waves, which are not accounted for in most attenuation equations, can cause long-duration shaking and damage in tall buildings. The overview of the current performance-based design methodologies includes discussions on the design of tall buildings and the reasons common prescriptive code provisions are not sufficient to address the requirements of tall-building design. In addition, the book explains the modelling and acceptance criteria associated with various performance-based design guidelines, and discusses issues such as selection and scaling of ground motion records, soil-foundation-structure interaction, and seismic instrumentation and peer review needs. The book is of interest to a wide range of professionals in earthquake engineering, including designers, researchers, and graduate students.

Download or read book Seismic Design and Performance written by T.G. Sitharam and published by Springer Nature. This book was released on 2021-03-26 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents select papers presented at the 7th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics. The papers discuss advances in the fields of soil dynamics and geotechnical earthquake engineering. Some of the themes include seismic design of deep & shallow foundations, soil structure interaction under dynamic loading, marine structures, etc. A strong emphasis is placed on connecting academic research and field practice, with many examples, case studies, best practices, and discussions on performance based design. This volume will be of interest to researchers and practicing engineers alike.

Download or read book Soil Structure Interaction written by A.S. Cakmak and published by Elsevier. This book was released on 2014-04-11 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in the field of geotechnical earthquake engineering, earthquakes continue to cause loss of life and property in one part of the world or another. The Third International Conference on Soil Dynamics and Earthquake Engineering, Princeton University, Princeton, New Jersey, USA, 22nd to 24th June 1987, provided an opportunity for participants from all over the world to share their expertise to enhance the role of mechanics and other disciplines as they relate to earthquake engineering. The edited proceedings of the conference are published in four volumes. This volume covers: Soil Structure Interaction under Dynamic Loads, Vibration of Machine Foundations, and Base Isolation in Earthquake Engineering. With its companion volumes, it is hoped that it will contribute to the further development of techniques, methods and innovative approaches in soil dynamics and earthquake engineering.

Download or read book NEHRP Recommended Provisions for the Development of Seismic Regulations for New Buildings Commentary written by Building Seismic Safety Council (U.S.) and published by . This book was released on 1991 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Soil Foundation Structure Interaction in the Earthquake Performance of Multi storey Buildings on Shallow Foundations written by Luke Brian Storie and published by . This book was released on 2017 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The influence of nonlinear soil-foundation-structure interaction (SFSI) on the performance of multi-storey buildings during earthquake events has become increasingly important in earthquake resistant design. For buildings on shallow foundations, SFSI refers to nonlinear geometric effects associated with uplift of the foundation from the supporting soil as well as nonlinear soil deformation effects. These effects can potentially be beneficial for structural performance, reducing forces transmitted from ground shaking to the structure. However, there is also the potential consequence of residual settlement and rotation of the foundation. This Thesis investigates the influence of SFSI in the performance of multi-storey buildings on shallow foundations through earthquake observations, experimental testing, and development of spring-bed numerical models that can be incorporated into integrated earthquake resistant design procedures. Observations were made following the 22 February 2011 Christchurch Earthquake in New Zealand of a number of multi-storey buildings on shallow foundations that performed satisfactorily. This was predominantly the case in areas where shallow foundations, typically large raft foundations, were founded on competent gravel and where there was no significant manifestation of liquefaction at the ground surface. The properties of these buildings and the soils they are founded on directed experimental work that was conducted to investigate the mechanisms by which SFSI may have influenced the behaviour of these types of structure-foundation systems. Centrifuge experiments were undertaken at the University of Dundee, Scotland using a range of structure-foundation models and a layer of dense cohesionless soil to simulate the situation in Christchurch where multi-storey buildings on shallow foundations performed well. Three equivalent single degree of freedom (SDOF) models representing 3, 5, and 7 storey buildings with identical large raft foundations were subjected to a range of dynamic Ricker wavelet excitations and Christchurch Earthquake records to investigate the influence of SFSI on the response of the equivalent buildings. The experimental results show that nonlinear SFSI has a significant influence on structural response and overall foundation deformations, even though the large raft foundations on competent soil meant that there was a significant reserve of bearing capacity available and nonlinear deformations may have been considered to have had minimal effect. Uplift of the foundation from the supporting soil was observed across a wide range of input motion amplitudes and was particularly significant as the amplitude of motion increased. Permanent soil deformation represented by foundation settlement and residual rotation was also observed but mainly for the larger input motions. However, the absolute extent of uplift and permanent soil deformation was very small compared to the size of the foundation meaning the serviceability of the building would still likely be maintained during large earthquake events. Even so, the small extent of SFSI resulted in attenuation of the response of the structure as the equivalent period of vibration was lengthened and the equivalent damping in the system increased. The experimental work undertaken was used to validate and enhance numerical modelling techniques that are simple yet sophisticated and promote interaction between geotechnical and structural specialists involved in the design of multi-storey buildings. Spring-bed modelling techniques were utilised as they provide a balance between ease of use, and thus ease of interaction with structural specialists who have these techniques readily available in practice, and theoretically rigorous solutions. Fixed base and elastic spring-bed models showed they were unable to capture the behaviour of the structure-foundation models tested in the centrifuge experiments. SFSI spring-bed models were able to more accurately capture the behaviour but recommendations were proposed for the parameters used to define the springs so that the numerical models closely matched experimental results. From the spring-bed modelling and results of centrifuge experiments, an equivalent linear design procedure was proposed along with a procedure and recommendations for the implementation of nonlinear SFSI spring-bed models in practice. The combination of earthquake observations, experimental testing, and simplified numerical analysis has shown how SFSI is influential in the earthquake performance of multi-storey buildings on shallow foundations and should be incorporated into earthquake resistant design of these structures.

Download or read book Seismic Rehabilitation of Existing Buildings written by American Society of Civil Engineers and published by ASCE Publications. This book was released on 2007 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 41-06 presents the latest generation of performance-based seismic rehabilitation methodology.

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 8083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Computational Simulations of Linear Soil foundation structure Systems Under Dynamic and Seismic Loading written by Edward H. Stehmeyer (III.) and published by . This book was released on 2003 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Earthquake Engineering written by Amr S. Elnashai and published by John Wiley & Sons. This book was released on 2015-07-21 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Earthquake Engineering: From Source to Fragility, Second Edition combines aspects of engineering seismology, structural and geotechnical earthquake engineering to assemble the vital components required for a deep understanding of response of structures to earthquake ground motion, from the seismic source to the evaluation of actions and deformation required for design, and culminating with probabilistic fragility analysis that applies to individual as well as groups of buildings. Basic concepts for accounting for the effects of soil-structure interaction effects in seismic design and assessment are also provided in this second edition. The nature of earthquake risk assessment is inherently multi-disciplinary. Whereas this book addresses only structural safety assessment and design, the problem is cast in its appropriate context by relating structural damage states to societal consequences and expectations, through the fundamental response quantities of stiffness, strength and ductility. This new edition includes material on the nature of earthquake sources and mechanisms, various methods for the characterization of earthquake input motion, effects of soil-structure interaction, damage observed in reconnaissance missions, modeling of structures for the purposes of response simulation, definition of performance limit states, fragility relationships derivation, features and effects of underlying soil, structural and architectural systems for optimal seismic response, and action and deformation quantities suitable for design. Key features: Unified and novel approach: from source to fragility Clear conceptual framework for structural response analysis, earthquake input characterization, modelling of soil-structure interaction and derivation of fragility functions Theory and relevant practical applications are merged within each chapter Contains a new chapter on the derivation of fragility Accompanied by a website containing illustrative slides, problems with solutions and worked-through examples Fundamentals of Earthquake Engineering: From Source to Fragility, Second Edition is designed to support graduate teaching and learning, introduce practising structural and geotechnical engineers to earthquake analysis and design problems, as well as being a reference book for further studies.