Download or read book Seismic Hazards in Site Evaluation for Nuclear Installations written by and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This Safety Guide supplements the Safety Requirements publication Safety of Fuel Cycle Facilities, and addresses all the stages in the life cycle of uranium fuel fabrication facilities (UFFFs), with emphasis being placed on design and operation. It describes the actions, conditions and procedures for meeting safety requirements and deals specifically with the handling, processing and storage of low enriched uranium that has a 235U concentration of no more than 6%, derived from natural, highly enriched or reprocessed uranium. The publication is intended to be of use to designers, operating organizations and regulators to ensure the safety of UFFFs."--Provided by publisher.

Download or read book Seismic Hazards in Site Evaluation for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-01-19 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide supersedes the 2010 edition of IAEA Safety Standards Series No. SSG-9. It takes account of recently gained knowledge and practices developed by Member States related to seismic hazards, especially lessons from the Fukushima Daiichi accident. It also addresses concomitant events associated with earthquakes, such as tsunamis. The revision provides a clearer separation between the process for assessing the seismic hazards at a specific nuclear installation site and the process for defining the related basis for design and safety assessment of the nuclear installation. Thus, it bridges gaps and avoids undue overlap of the two processes, which correspond to and are performed at different stages of siting of the nuclear installation.

Download or read book Earthquake Engineering for Nuclear Facilities written by Masanori Hamada and published by Springer. This book was released on 2018-07-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground are explained.

Download or read book Seismic Hazard Assessment in Site Evaluation for Nuclear Installations written by International Atomic Energy Agency and published by IAEA Tecdoc Series No. 1796. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the state-of-the-art practice and detailed technical elements related to ground motion evaluation by ground motion prediction equations (GMPEs) and site response in the context of seismic hazard assessments as recommended in IAEA Safety Standards Series No. SSG-9, Seismic Hazards in Site Evaluation for Nuclear Installations.

Download or read book Evaluation of Seismic Safety for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2024-02-07 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the seismic safety evaluation of nuclear installations. It addresses all types of new and existing nuclear installations. This Safety Guide presents three assessment methodologies: the deterministic approach, generally known as seismic margin assessment (SMA), seismic probabilistic safety assessment (SPSA), and a combination of SMA and SPSA known as ‘probabilistic safety assessment (PSA) based SMA. This Safety Guide provides specific recommendations on applying a performance-based graded approach to the seismic safety evaluation of nuclear installations other than nuclear power plants. It also covers the relation between seismic safety margins and defense-in-depth (DiD) level 3 and level 4. For new nuclear installations, this Safety Guide provides recommendations to assess adequacy of seismic margin to avoid cliff edge effects considering DiD level 3 and level 4. This publication is intended for use by regulatory bodies, operating organizations, and designers of nuclear installations.

Download or read book Practice of Earthquake Hazard Assessment written by DIANE Publishing Company and published by DIANE Publishing. This book was released on 1993 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes probabilistic seismic hazard assessment as it is practiced in various countries throughout the world. 59 reports are included covering 88 countries, which comprise about 80% of the inhabited land mass of the Earth. Over 100 maps.

Download or read book Seismic Hazard Assessment in Site Evaluation for Nuclear Installations written by and published by . This book was released on 2016 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The objective of this publication is to provide the state-of-the-art practice and detailed technical elements related to ground motion evaluation by ground motion prediction equations (GMPEs) and site response in the context of seismic hazard assessments as recommended in IAEA Safety Standards Series No. SSG-9, Seismic Hazards in Site Evaluation for Nuclear Installations. The publication includes the basics of GMPEs, ground motion simulation, selection and adjustment of GMPEs, site characterization, and modelling of site response in order to improve seismic hazard assessment. The text aims at delineating the most important aspects of these topics (including current practices, criticalities and open problems) within a coherent framework. In particular, attention has been devoted to filling conceptual gaps. It is written as a reference text for trained users who are responsible for planning preparatory seismic hazard analyses for siting of all nuclear installations and/or providing constraints for anti-seismic design and retrofitting of existing structures."--Publisher's description.

Download or read book Diffuse Seismicity in Seismic Hazard Assessment for Site Evaluation of Nuclear Installations written by International Atomic Energy Agency and published by IAEA Safety Report Series No.. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffuse seismicity refers to earthquakes occurring in locations where no apparent correlation can be made with any causative faults. This publication provides guidance for addressing the seismic hazard from diffuse seismicity in a manner consistent with internationally recognized practices and with reference to relevant IAEA safety standards.

Download or read book Best Practices in Physics based Fault Rupture Models for Seismic Hazard Assessment of Nuclear Installations written by Luis A. Dalguer and published by Birkhäuser. This book was released on 2017-12-20 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects several extended articles from the first workshop on Best Practices in Physics-based Fault Rupture Models for Seismic Hazard Assessment of Nuclear Installations (BestPSHANI). Held in 2015, the workshop was organized by the IAEA to disseminate the use of physics-based fault-rupture models for ground motion prediction in seismic hazard assessments (SHA). The book also presents a number of new contributions on topics ranging from the seismological aspects of earthquake cycle simulations for source scaling evaluation, seismic source characterization, source inversion and physics-based ground motion modeling to engineering applications of simulated ground motion for the analysis of seismic response of structures. Further, it includes papers describing current practices for assessing seismic hazard in terms of nuclear safety in low seismicity areas, and proposals for physics-based hazard assessment for critical structures near large earthquakes. The papers validate and verify the models by comparing synthetic results with observed data and empirical models. The book is a valuable resource for scientists, engineers, students and practitioners involved in all aspects of SHA.

Download or read book Review of Recommendations for Probabilistic Seismic Hazard Analysis written by National Research Council and published by National Academies Press. This book was released on 1997-01-06 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquakes Tsunamis and Nuclear Risks written by Katsuhiro Kamae and published by Springer. This book was released on 2016-01-22 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers seismic probabilistic risk assessment (S-PRA) and related studies which have become more important to increase the safety of nuclear facilities against earthquakes and tsunamis in the face of the many uncertainties after the Fukushima accident. The topics are (1) Active faults and active tectonics important for seismic hazard assessment of nuclear facilities,(2) Seismic source modeling and simulation and modeling techniques indispensable for strong ground motion prediction, and (3) PRA with external hazard and risk communication. The Fukushima accident has showed us the limitations of the deterministic evaluation approach to external events (an earthquake and tsunami) in which there are many uncertainties. Furthermore, public anxiety regarding nuclear safety because of an unexpected threat caused by an earthquake or tsunami is growing. The current policy on the estimation of the design basis of ground motion as well as tsunami height still has not been improved following the Fukushima accident. In particular, the risk concept in a nuclear system regarding seismic motion and a tsunami beyond the design basis is indispensable. Therefore, research and development for PRA enhancing nuclear safety are being actively pursued not only in Japan but also worldwide. This book provides an opportunity for readers to consider the future direction of nuclear safety vis-à-vis natural disasters.

Download or read book Evaluation of Seismic Hazards for Nuclear Power Plants written by and published by IAEA. This book was released on 2002 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides guidelines and recommends procedures for the evaluation of seismic hazards for nuclear power plants. Specifically, it provides recommendations on how to determine the ground motion hazards for a plant at a particular site and the potential for surface faulting, which could affect the feasibility of construction and safe operation of a plant at that site. The Guide supersedes IAEA Safety Series No. 50-SG-S1 (Rev.l), Earthquakes and Associated Topics in Relation to Nuclear Power plant Siting that was issued in 1991.

Download or read book Reference Seismic Ground Motions in Nuclear Safety Assessments written by OECD Nuclear Energy Agency. Committee on the Safety of Nuclear Installations and published by Nuclear Energy Agency, Organisation for Economic Co-operation and Development ; [Washington, D.C. : Sold by OECD Publications and Information Center]. This book was released on 1980 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design and Qualification for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2003 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a generally accepted way to design a nuclear power plant so that an earthquake motion at the site will not jeopardize the safety of the plant. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.

Download or read book Design of Nuclear Installations Against External Events Excluding Earthquakes written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-12-23 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the design of nuclear installations for protection against the effects of external events (excluding earthquakes), meeting the applicable safety requirements established in relation to the design aspects of nuclear installations subjected to external events. It provides methods and procedures for defining an appropriate design for a nuclear installation, based on the site hazard evaluation and the layout of the installation. The aim is to provide design guidance, in particular for the protection of structures, systems and components important to safety against design basis external events. The guide also provides recommendations on the selection of beyond design basis external events, in order to check and verify safety margins.

Download or read book Seismic Design for Nuclear Installations written by IAEA and published by . This book was released on 2022-01-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on how to meet the applicable safety requirements in relation to the design aspects of new nuclear installations subjected to seismic hazard. These recommendations focus on the consistent application of methods and procedures, in accordance with best practice, for seismic analysis, design, testing and qualification of structures, systems and components. New recommendations include applications of seismic isolation systems, the seismic margin to be achieved by the design and application of the graded approach. This Safety Guide is intended for use by organizations involved in the seismic design of nuclear installations, in analysis, verification and review, and in the provision of technical support, as well as by regulatory bodies

Download or read book Seismic Risk Analysis of Nuclear Power Plants written by Wei-Chau Xie and published by Cambridge University Press. This book was released on 2019-04-18 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Risk Analysis of Nuclear Power Plants addresses the needs of graduate students in engineering, practicing engineers in industry, and regulators in government agencies, presenting the entire process of seismic risk analysis in a clear, logical, and concise manner. It offers a systematic and comprehensive introduction to seismic risk analysis of critical engineering structures focusing on nuclear power plants, with a balance between theory and applications, and includes the latest advances in research. It is suitable as a graduate-level textbook, for self-study, or as a reference book. Various aspects of seismic risk analysis - from seismic hazard, demand, and fragility analyses to seismic risk quantification, are discussed, with detailed step-by-step analysis of specific engineering examples. It presents a wide range of topics essential for understanding and performing seismic risk analysis, including engineering seismology, probability theory and random processes, digital signal processing, structural dynamics, random vibration, and engineering risk and reliability.