Download or read book Seismic Evaluation and Rehabilitation of Structures written by Alper Ilki and published by Springer. This book was released on 2013-11-27 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, facilities considered to be at the end of their useful life were demolished and replaced with new ones that better met the functional requirements of modern society, including new safety standards. Humankind has recently recognised the threats to the environment and to our limited natural resources due to our relentless determination to destroy the old and build anew. With the awareness of these constraints and the emphasis on sustainability, in future the majority of old structures will be retrofitted to extend their service life as long as feasible. In keeping with this new approach, the EU’s Construction Products Regulation 305/2011, which is the basis of the Eurocodes, included the sustainable use of resources as an "Essential Requirement" for construction. So, the forthcoming second generation of EN-Eurocodes will cover not only the design of new structures, but the rehabilitation of existing ones as well. Most of the existing building stock and civil infrastructures are seismically deficient. When the time comes for a decision to prolong their service life with the help of structural and architectural upgrading, seismic retrofitting may be needed. Further, it is often decided to enhance the earthquake resistance of facilities that still meet their functional requirements and fulfil their purpose, if they are not earthquake-safe. In order to decide how badly a structure needs seismic upgrading or to prioritise it in a population of structures, a seismic evaluation is needed, which also serves as a guide for the extent and type of strengthening. Seismic codes do not sufficiently cover the delicate phase of seismic evaluation nor the many potential technical options for seismic upgrading; therefore research is on-going and the state-of-the-art is constantly evolving. All the more so as seismic evaluation and rehabilitation demand considerable expertise, to make best use of the available safety margins in the existing structure, to adapt the engineering capabilities and techniques at hand to the particularities of a project, to minimise disruption of use, etc. Further, as old structures are very diverse in terms of their materials and layout, seismic retrofitting does not lend itself to straightforward codified procedures or cook-book approaches. As such, seismic evaluation and rehabilitation need the best that the current state-of-the-art can offer on all aspects of earthquake engineering. This volume serves this need, as it gathers the most recent research of top seismic experts from around the world on seismic evaluation, retrofitting and closely related subjects.

Download or read book Seismic Evaluation and Rehabilitation of Structures written by Alper Ilki and published by Springer Science & Business Media. This book was released on 2013-08-15 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, facilities considered to be at the end of their useful life were demolished and replaced with new ones that better met the functional requirements of modern society, including new safety standards. Humankind has recently recognised the threats to the environment and to our limited natural resources due to our relentless determination to destroy the old and build anew. With the awareness of these constraints and the emphasis on sustainability, in future the majority of old structures will be retrofitted to extend their service life as long as feasible. In keeping with this new approach, the EU’s Construction Products Regulation 305/2011, which is the basis of the Eurocodes, included the sustainable use of resources as an "Essential Requirement" for construction. So, the forthcoming second generation of EN-Eurocodes will cover not only the design of new structures, but the rehabilitation of existing ones as well. Most of the existing building stock and civil infrastructures are seismically deficient. When the time comes for a decision to prolong their service life with the help of structural and architectural upgrading, seismic retrofitting may be needed. Further, it is often decided to enhance the earthquake resistance of facilities that still meet their functional requirements and fulfil their purpose, if they are not earthquake-safe. In order to decide how badly a structure needs seismic upgrading or to prioritise it in a population of structures, a seismic evaluation is needed, which also serves as a guide for the extent and type of strengthening. Seismic codes do not sufficiently cover the delicate phase of seismic evaluation nor the many potential technical options for seismic upgrading; therefore research is on-going and the state-of-the-art is constantly evolving. All the more so as seismic evaluation and rehabilitation demand considerable expertise, to make best use of the available safety margins in the existing structure, to adapt the engineering capabilities and techniques at hand to the particularities of a project, to minimise disruption of use, etc. Further, as old structures are very diverse in terms of their materials and layout, seismic retrofitting does not lend itself to straightforward codified procedures or cook-book approaches. As such, seismic evaluation and rehabilitation need the best that the current state-of-the-art can offer on all aspects of earthquake engineering. This volume serves this need, as it gathers the most recent research of top seismic experts from around the world on seismic evaluation, retrofitting and closely related subjects.

Download or read book Handbook for the Seismic Evaluation of Buildings written by Ugo Morelli and published by DIANE Publishing. This book was released on 1999-04 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a process for seismic evaluation of existing buildings in any region of seismicity. Buildings are evaluated to either the Life Safety or Immediate Occupancy Performance Level. Provides instruction to the evaluating design professional on how to determine if a building is adequately designed and constructed to resist seismic forces. All aspects of building performances are considered in terms of foundation/geologic, structural, hazard, nonstructural issues. Reflects advancements in technology; incorporates design professional experience; incorporates lessons learned during recent earthquakes; and much more.

Download or read book Rapid Visual Screening of Buildings for Potential Seismic Hazards Supporting Documentation written by and published by Government Printing Office. This book was released on 2015 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure comprises a method and several forms that help users to quickly identify, inventory, and score buildings according to their risk of collapse if hit by major earthquakes. The RVS handbook describes how to identify the structural type and key weakness characteristics, how to complete the screening forms, and how to manage a successful RVS program.

Download or read book Seismic Rehabilitation of Buildings written by and published by DIANE Publishing. This book was released on 1993-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NEHRP Commentary on the Gidelines for the Seismic Rehabilitation of Buildings written by Eugene Zeller and published by DIANE Publishing. This book was released on 2000-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document from the National Earthquake Hazards Reduction Program (NEHRP) was prepared for the Building Seismic Safety Council (BSSC) with funding from the Federal Emergency Management Agency (FEMA). It provides commentary on the NEHRP Guidelines for the Seismic Rehabilitation of Buildings. It contains systematic guidance enabling design professionals to formulate effective & reliable rehabilitation approaches that will limit the expected earthquake damage to a specified range for a specified level of ground shaking. This kind of guidance applicable to all types of existing buildings & in all parts of the country has never existed before. Illustrated.

Download or read book Typical Costs for Seismic Rehabilitation of Existing Buildings written by and published by DIANE Publishing. This book was released on 1993-07 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains a detailed presentation of the methodology & conclusions

Download or read book Example Applications of the NEHRP Guidelines for the Seismic Rehabilitation of Buildings written by and published by . This book was released on 1999 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Evaluation of Existing Buildings written by and published by DIANE Publishing. This book was released on 1993-07 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides design professionals & local building officials with a standard methodology to evaluate buildings of different types & occupancies in areas of different seismicity throughout the U.S.

Download or read book Structural Rehabilitation of Old Buildings written by Aníbal Costa and published by Springer Science & Business Media. This book was released on 2013-09-11 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This present book describes the different construction systems and structural materials and elements within the main buildings typologies, and it analyses the particularities of each of them, including, at the end, general aspects concerning laboratory and in-situ testing, numerical modeling, vulnerability assessment and construction maintenance.

Download or read book Handbook for the Seismic Evaluation of Existing Buildings written by Building Seismic Safety Council (U.S.) and published by DIANE Publishing. This book was released on 1992 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides engineers involved with the seismic evaluation of existing buildings with guidance concerning the potential earthquake related risk to human life posed by a building or building component.

Download or read book Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures written by Asteris, Panagiotis G. and published by IGI Global. This book was released on 2015-07-13 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of heritage monuments provides sustainable development and cultural significance to a region. The most sensitive aspect of the refurbishment of existing buildings lies in the renovation and recovery of structural integrity and public safety. The Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures evaluates developing contributions in the field of earthquake engineering with regards to the analysis and treatment of structural damage inflicted by seismic activity. This book is a vital reference source for professionals, researchers, students, and engineers active in the field of earthquake engineering who are interested in the emergent developments and research available in the preservation and rehabilitation of heritage buildings following seismic activity.

Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.

Download or read book Manual for Screening of Buildings for Seismic Investigation written by Institute for Research in Construction (Canada) and published by . This book was released on 1993 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Establishing Programs and Priorities for the Seismic Rehabilitation of Buildings written by and published by DIANE Publishing. This book was released on 1993-07 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides nationally applicable guidelines for the use of a local jurisdiction in making informed decisions on rehabilitating seismically hazardous existing buildings. Provides references on the topics discussed in the first report

Download or read book Risk Management Series Incremental Seismic Rehabilitation of Hotel and Motel Buildings written by Federal Emergency Agency and published by FEMA. This book was released on 2013-01-27 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes are a serious threat to safety in hotel and motel buildings and pose a significant potential liability to owners and operators. Hotel and motel buildings in 39 states are vulnerable to earthquake damage. Unsafe existing buildings expose hotel and motel building owners, operators, and guests to the following risks: Death and injury to guests, visitors, and staff; Damage to or collapse of buildings; Damage to and loss of furnishings, equipment, and other building contents; and Disruption of hospitality functions and building operations. The greatest earthquake risk is associated with existing hotel and motel buildings that were designed and constructed before the use of modern building codes. For many parts of the United States, this includes buildings built as recently as the early 1990s. Although vulnerable hotel and motel buildings should be replaced with safe, new construction or rehabilitated to correct deficiencies, for many building owners, new construction is limited, at times severely, by budgetary constraints, and seismic rehabilitation is expensive and disruptive. However, incremental seismic rehabilitation, an innovative approach that phases in a series of discrete rehabilitation actions over a period of several years, is an effective, affordable, and non-disruptive strategy for responsible mitigation action that can be integrated efficiently into ongoing facility maintenance and capital improvement operations to minimize cost and disruption. This manual and its companion documents are the products of a Federal Emergency Management Agency (FEMA) project to develop the concept of incremental seismic rehabilitation-that is, building modifications that reduce seismic risk by improving seismic performance and that are implemented over an extended period, often in conjunction with other repair, maintenance, or capital improvement activities. It provides operators of hotels and motels and their owners, be they Real Estate Investment Trusts (REITs), pension funds, partnerships, individuals, or other forms of ownership, with the information necessary to assess the seismic vulnerability of their buildings and to implement a program of incremental seismic rehabilitation for those buildings.

Download or read book Tall Building Design written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-10-04 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the Question Frequently Proposed to the Designer by Architects: "Can We Do This? Offering guidance on how to use code-based procedures while at the same time providing an understanding of why provisions are necessary, Tall Building Design: Steel, Concrete, and Composite Systems methodically explores the structural behavior of steel, concrete, and composite members and systems. This text establishes the notion that design is a creative process, and not just an execution of framing proposals. It cultivates imaginative approaches by presenting examples specifically related to essential building codes and standards. Tying together precision and accuracy—it also bridges the gap between two design approaches—one based on initiative skill and the other based on computer skill. The book explains loads and load combinations typically used in building design, explores methods for determining design wind loads using the provisions of ASCE 7-10, and examines wind tunnel procedures. It defines conceptual seismic design, as the avoidance or minimization of problems created by the effects of seismic excitation. It introduces the concept of performance-based design (PBD). It also addresses serviceability considerations, prediction of tall building motions, damping devices, seismic isolation, blast-resistant design, and progressive collapse. The final chapters explain gravity and lateral systems for steel, concrete, and composite buildings. The Book Also Considers: Preliminary analysis and design techniques The structural rehabilitation of seismically vulnerable steel and concrete buildings Design differences between code-sponsored approaches The concept of ductility trade-off for strength Tall Building Design: Steel, Concrete, and Composite Systems is a structural design guide and reference for practicing engineers and educators, as well as recent graduates entering the structural engineering profession. This text examines all major concrete, steel, and composite building systems, and uses the most up-to-date building codes.