Download or read book Seismic Design of Reinforced and Precast Concrete Buildings written by Robert E. Englekirk and published by John Wiley & Sons. This book was released on 2003-03-10 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Presents the basics of seismic-resistant design of concrete structures. * Provides a major focus on the seismic design of precast bracing systems.
Download or read book Seismic Design of Precast Concrete Building Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this state-of-art report is to present current practices for use of precast and prestressed concrete in countries in seismic regions, to recommend good practice, and to discuss current developments. The report has been drafted by 30 contributors from nine different countries. This state-of-art report covers: state of the practice in various countries; advantages and disadvantages of incorporating precast reinforced and prestressed concrete in construction; lessons learned from previous earthquakes; construction concepts; design approaches; primary lateral load resisting systems (precast and prestressed concrete frame systems and structural walls including dual systems) diaphragms of precast and prestressed concrete floor units; modelling and analytical methods; gravity load resisting systems; foundations; and miscellaneous elements (shells, folded plates, stairs and architectural cladding panels). Design equations are reported where necessary, but the emphasis is on principles. Ordinary cast-in-place reinforced concrete is not considered in this report. This fib state-of-the-art report is intended to assist designers and constructors to provide safe and economical applications of structural precast concrete and at the same time to allow innovation in design and construction to continue. This Bulletin N° 27 was approved as an fib state-of-art report in autumn 2002 byfib Commission 7, Seismic design.
Download or read book Seismic Design of Reinforced and Precast Concrete Buildings written by Englekirk and published by . This book was released on 2003-02-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precast concrete buildings in seismic areas written by FIB – Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document has a broad scope and is not focussed on design issues. Precast construction under seismic conditions is treated as a whole. The main principles of seismic design of different structural systems, their behavior and their construction techniques are presented through rules, construction steps and sequences, procedures, and details that should lead to precast structures built in seismic areas complying with the fundamental performance requirements of collapse prevention and life safety in major earthquakes and limited damage in more frequent earthquakes. The content of this document is largely limited to conventional precast construction and, although some information is provided on the well-known “PRESSS technology” (jointed ductile dry connections), this latter solution is not treated in detail in this document. The general overview, contained in this document, of alternative structural systems and connection solutions available to achieve desired performance levels, intends to provide engineers, architects, clients, and end-users (in general) with a better appreciation of the wide range of applications that modern precast concrete technology can have in various types of construction from industrial to commercial as well as residential. Lastly, the emphasis on practical aspects, from conceptual design to connection detailing, aims to help engineers to move away from the habit of blindly following prescriptive codes in their design, but instead go back to basic principles, in order to achieve a more robust understanding, and thus control, of the seismic behaviour of the structural system as a whole, as well as of its components and individual connections.
Download or read book Displacement based Seismic Design of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief summary of the history of seismic design as given in chapter 1, indicates that initially design was purely based on strength or force considerations. When the importance of displacement, however, became better appreciated, it was attempted to modify the existing force-based approach in order to include considerations of displacement, rather than to totally reconsider the procedure on a more rational basis. In the last decade, then, several researchers started pointing out this inconsistency, proposing displacement-based approaches for earthquake engineering evaluation and design, with the aim of providing improved reliability in the engineering process by more directly relating computed response and expected structural performance. The main objective of this report is to summarize, critically review and compare the displacement - based approaches proposed in the literature, thus favouring code implementation and practical use of rational and reliable methods. Chapter 2 Seismic performance and design objectives of this report introduces concepts of performance levels, seismic hazard representation, and the coupling of performance and hazard to define performance objectives. In fact, for displacement analysis to be relevant in the context of performance-based design, the structural engineer must select appropriate performance levels and seismic loadings. A critical review of some engineering limit states appropriate to the different performance levels is therefore proposed. In chapter 3 Conceptual basis for displacement-based earthquake resistant design, the fundamental principles associated with displacement of the ground during an earthquake and the effects, in terms of displacement, in the structure, are reviewed. The historical development guides the presentation with a review of general linear and nonlinear structural dynamics principles, general approaches to estimate displacement, for both ground and structure, and finally a general presentation of the means to measure and judge the appropriateness of the displacements of the structure in section. Chapter 4 Approaches and procedures for displacement-based design can be somehow considered the fundamental part of the report, since a critical summary of the displacement - based approaches proposed by different researchers is presented there. Displacement - based design may require specific characterization of the input ground motion, a topic addressed in Chapter 5 Seismic input. In general, various pertinent definitions of input motion for non-code format analysis are included, while peak ground parameters necessary for code base shear equations are only addressed as needed for the definition of motion for analysis. Chapter 6 Displacement capacity of members and systems addresses the fundamental problem of evaluating the inelastic displacement capacity of reinforced concrete members and realistic values of their effective cracked stiffness at yielding, including effects of shear and inclined cracking, anchorage slip, bar buckling and of load cycling. In Chapter 7 Application and evaluation of displacement-based approaches, some of the many different displacement based design procedures briefly introduced in Chapter 4 are applied to various case studies, identifying and discussing the difficulties a designer may encounter when trying to use displacement based design. Results for five different case studies designed in accordance with eight different displacement based design methods are presented. Although in general case studies are considered a useful but marginal part of a state of the art document, in this case it has to be noted that chapter 7 is possibly the most innovative and fundamental part of the whole report. The conclusions of chapter 7 are the fundamental and essential conclusions of the document and allow foreseeing a bright future for displacement - based design approaches. The state-of-art report has been elaborated over a period of 4 years by Task Group 7.2 Displacement-based design and assessment of fib Commission 7Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In October 2002 the final draft of the Bulletin was presented to the public during the 1st fibCongress in Osaka. It was also there that it was approved by fib Commission 7Seismic Design.
Download or read book Design of Reinforced Concrete Buildings for Seismic Performance written by Mark Aschheim and published by CRC Press. This book was released on 2019-04-05 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: The costs of inadequate earthquake engineering are huge, especially for reinforced concrete buildings. This book presents the principles of earthquake-resistant structural engineering, and uses the latest tools and techniques to give practical design guidance to address single or multiple seismic performance levels. It presents an elegant, simple and theoretically coherent design framework. Required strength is determined on the basis of an estimated yield displacement and desired limits of system ductility and drift demands. A simple deterministic approach is presented along with its elaboration into a probabilistic treatment that allows for design to limit annual probabilities of failure. The design method allows the seismic force resisting system to be designed on the basis of elastic analysis results, while nonlinear analysis is used for performance verification. Detailing requirements of ACI 318 and Eurocode 8 are presented. Students will benefit from the coverage of seismology, structural dynamics, reinforced concrete, and capacity design approaches, which allows the book to be used as a foundation text in earthquake engineering.
Download or read book Design of Connections for Precast Prestressed Concrete Buildings for the Effects of Earthquake written by D. P. Clough and published by . This book was released on 1986 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Buildings in Seismic Regions written by George G. Penelis and published by CRC Press. This book was released on 2014-03-24 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bearing in mind that reinforced concrete is a key component in a majority of built environment structures, Concrete Buildings in Seismic Regions combines the scientific knowledge of earthquake engineering with a focus on the design of reinforced concrete buildings in seismic regions. This book addresses practical design issues, providing an integrated, comprehensible, and clear presentation that is suitable for design practice. It combines current approaches to seismic analysis and design, with a particular focus on reinforced concrete structures, and includes: an overview of structural dynamics analysis and design of new R/C buildings in seismic regions post-earthquake damage evaluation, pre earthquake assessment of buildings and retrofitting procedures seismic risk management of R/C buildings within urban nuclei extended numerical example applications Concrete Buildings in Seismic Regions determines guidelines for the proper structural system for many types of buildings, explores recent developments, and covers the last two decades of analysis, design, and earthquake engineering. Divided into three parts, the book specifically addresses seismic demand issues and the basic issues of structural dynamics, considers the "capacity" of structural systems to withstand seismic effects in terms of strength and deformation, and highlights existing R/C buildings under seismic action. All of the book material has been adjusted to fit a modern seismic code and offers in-depth knowledge of the background upon which the code rules are based. It complies with the last edition of European Codes of Practice for R/C buildings in seismic regions, and includes references to the American Standards in effect for seismic design.
Download or read book Seismic Design for Buildings written by United States. Department of Defense. Tri-Service Seismic Design Committee and published by . This book was released on 1973 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design of Reinforced Concrete Buildings written by Jack Moehle and published by McGraw Hill Professional. This book was released on 2014-10-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations
Download or read book Seismic Design of Reinforced Concrete Buildings written by Jack Moehle and published by McGraw-Hill Education. This book was released on 2014-10-28 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations
Download or read book Guide to Emulating Cast in Place Detailing for Seismic Design of Precast Concrete Structures written by Joint ACI-ASCE Committee 550 and published by . This book was released on 2009 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide provides information for detailing precast concrete structures that should meet building code requirements for all seismic design categories by emulating cast-in-place reinforced concrete design. This guide also explains how emulative precast concrete structures can address the provisions of ACI 318-08, including those of Chapter 21, if special attention is directed to detailing the joints and splices between precast components.
Download or read book Concrete Buildings in Seismic Regions Second Edition written by George G. Penelis and published by CRC Press. This book was released on 2018-10-04 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete (R/C) is one of the main building materials used worldwide, and an understanding of its structural performance under gravity and seismic loads, albeit complex, is crucial for the design of cost effective and safe buildings.Concrete Buildings in Seismic Regions comprehensively covers of all the analysis and design issues related
Download or read book Seismic Design of Reinforced Concrete Structures for Controlled Inelastic Response written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1998 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed guide is designed to enable the reader to understand the relative importance of the numerous parameters involved in seismic design and the relationships between them, as well as the motivations behind the choices adopted by the codes.
Download or read book Seismic Design of Reinforced Concrete and Masonry Buildings written by Thomas Paulay and published by Wiley-Interscience. This book was released on 1992-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.
Download or read book Performance Based Seismic Design of Concrete Structures and Infrastructures written by Plevris, Vagelis and published by IGI Global. This book was released on 2017-02-14 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid design and craftsmanship are a necessity for structures and infrastructures that must stand up to natural disasters on a regular basis. Continuous research developments in the engineering field are imperative for sustaining buildings against the threat of earthquakes and other natural disasters. Performance-Based Seismic Design of Concrete Structures and Infrastructures is an informative reference source on all the latest trends and emerging data associated with structural design. Highlighting key topics such as seismic assessments, shear wall structures, and infrastructure resilience, this is an ideal resource for all academicians, students, professionals, and researchers that are seeking new knowledge on the best methods and techniques for designing solid structural designs.
Download or read book Seismic Performance of Concrete Buildings written by Liviu Crainic and published by CRC Press. This book was released on 2012-12-10 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines and presents essential aspects of the behavior, analysis, design and detailing of reinforced concrete buildings subjected to strong seismic activity. Seismic design is an extremely complex problem that has seen spectacular development in the last decades. The present volume tries to show how the principles and methods of earthquake engineering can be applied to seismic analysis and design of reinforced concrete buildings. The book starts with an up-to-date presentation of fundamental aspects of reinforced concrete behavior quantified through constitutive laws for monotonic and hysteretic loading. Basic concepts of post-elastic analysis like plastic hinge, plastic length, fiber models, and stable and unstable hysteretic behaviour are, accordingly, defined and commented upon. For a deeper understanding of seismic design philosophy and of static and dynamic post-elastic analysis, seismic behavior of different types of reinforced concrete structures (frames, walls) is examined in detail. Next, up-to-date methods for analysis and design are presented. The powerful concept of structural system is defined and systematically used to explain the response to seismic activity, as well as the procedures for analysis and detailing of common building structures. Several case studies are presented. The book is not code-oriented. The structural design codes are subject to constant reevaluation and updating. Rather than presenting code provisions, this book offers a coherent system of notions, concepts and methods, which facilitate understanding and application of any design code. The content of this book is based mainly on the authors’ personal experience which is a combination of their teaching and research activity as well as their work in the private sector as structural designers. The work will serve to help students and researchers, as well as structural designers to better understand the fundamental aspects of behavior and analysis of reinforced concrete structures and accordingly to gain knowledge that will ensure a sound design of buildings.
