Download or read book Sebacic Acid Production Process Cost Analysis Sebacic Acid E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Sebacic Acid production from castor oil and sodium hydroxide. The process examined is a typical caustic oxidation process. This report was developed based essentially on the following reference(s): Keywords: Decanedioic Acid, Dicarboxylic Acid, 1,8-Octanedicarboxylic Acid

Download or read book Sebacic Acid Production Process Cost Analysis Sebacic Acid E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Sebacic Acid production from castor oil and sodium hydroxide The process examined is a typical caustic oxidation process. This report was developed based essentially on the following reference(s): Keywords: Decanedioic Acid, Dicarboxylic Acid, 1,8-Octanedicarboxylic Acid

Download or read book Polyethylene Terephthalate Production Process Cost Analysis PET E12A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Terephthalate (PET) production from ethylene glycol and purified terephthalic acid (PTA). The process examined is similar to Invista NG3 process. In this process, PET oligomers are first polymerized in a melt-phase step, and then passed through a solid-state polymerization step. This report was developed based essentially on the following reference(s): US Patents 5786443 and 5730913, both issued to DuPont in 1998 (both assigned to Invista in 2004) Keywords: Thermoplastic Polymer, Polyester, High Intrinsic Viscosity, Melt-Phase Polycondensation

Download or read book BPA Production Process Cost Analysis BPA E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Bisphenol A (BPA) production from phenol and acetone. In this process, BPA is produced by the condensation reaction of acetone with phenol. The reaction is catalyzed by hydrogen chloride. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Carbolic Acid, Propanone, Hooker Chemical, Occidental Chemical, OxyChem

Download or read book 2 Ethylhexanol Production Process Cost Analysis 2 EH E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of 2-Ethylhexanol (2-EH) production from propylene and syngas. The process examined is similar to the LP OXO Selector technology jointly licensed by JM Davy and Dow. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: oxo alcohol, oxo process

Download or read book Aluminium Chloride Production Process Cost Analysis Aluminium Chloride E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of a typical Aluminium Chloride production process from aluminium metal and chlorine. In the process, chlorine gas is passed through molten aluminium powder in ceramic lined tube shaped reactors, producing Aluminium Chloride. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Aluminum Trichloride, Aluminium Scrap, Anhydrous Aluminium Chloride

Download or read book HDPE Production via Slurry Process Cost Analysis HDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a slurry process. The process examined is similar to LyondellBasell Hostalen process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): LyondellBasell, "Licensed Polyolefin Technologies and Services - Hostalen" Keywords: Ethene, Bimodal, Multimodal, CSTR, Advanced Cascade Process, ACP, Butylene

Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-07 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals SCLAIRTECH process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): EP Patent 0527144, issued to DuPont in 1996 Keywords: Ethene, DuPont Canada, Cyclohexane, Stirred-Reactor, Swing Technology, Multi-Reactor

Download or read book Medium Purity Terephthalic Acid Production Cost Analysis TPA E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Medium-Purity Terephthalic Acid (MTA) production from p-xylene. The process examined is a typical catalytic oxidation process. In this process, p-xylene is oxidized to Terephthalic Acid. Subsequently, the Terephthalic Acid is crystallized and recovered from the liquor and MTA is obtained as the final product. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Terephthalic Acid, Dimethyl Terephthalate, and Isophthalic Acid", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Para-xylene, TPA, Post-Oxidation Reactor, Mitsubishi, Eastman, Lurgi, Medium Quality, QTA, EPTA

Download or read book Lactic Acid Production from Glucose Cost Analysis LA E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Lactic Acid production from glucose syrup using a fermentation process. The process examined is similar to Corbion process. In this process, a 70 wt% glucose-water syrup is used as raw material. The fermentation broth is acidified in order to recover Lactic Acid and the product purification is realized by the use of a solvent. An 88 wt% Lactic Acid solution in water is generated as final product. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 7867736, issued to Purac (now Corbion) in 2011; (2) US Patent 6747173, issued to Purac (now Corbion) in 2004 Keywords: Dextrose, 2-Hydroxypropanoic Acid, Anaerobic Fermentation, Calcium Carbonate, Sulfuric Acid

Download or read book Polypropylene Homopolymer via Bulk Process Cost Analysis Polypropylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polypropylene (PP) homopolymer production from polymer grade (PG) propylene using a bulk phase polymerization process. The process examined is similar to the processes LyondellBasell Spheripol and Mitsui Hypol II. This process is based on the polymerization of liquid PG propylene, in loop reactors, to produce PP homopolymer. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Polyolefins", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: PG Propylene, Propene, Tubular Reactor, Liquid-Phase Polymerization

Download or read book Sodium Hydroxide via Membrane Process Cost Analysis Sodium Hydroxide E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Sodium Hydroxide production from brine. The process examined is a typical membrane process. In this process, an aqueous solution of sodium chloride (brine) is decomposed electrolytically in a membrane cell, producing Sodium Hydroxide and chlorine. The Sodium Hydroxide product obtained is a 50 wt% aqueous solution. Hydrogen is also generated as by-products in the process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Chlorine", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Chlor-Alkali, Caustic Soda, NaOH

Download or read book Sodium Hypochlorite via Chemical Process Cost Analysis Sodium Hypochlorite E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-08 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of sodium hypochlorite production from sodium hydroxide and chlorine. The process examined is a typical chemical process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Chlorine Oxides and Chlorine Oxygen Acids", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Bleach, Chlorination, Caustic Soda, NaOH, Solvay Chemicals, Chlor-alkali

Download or read book LDPE via High Pressure Tubular Process Cost Analysis LDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Low Density Polyethylene (LDPE) production from polymer grade (PG) ethylene. The process examined is a typical high-pressure tubular polymerization process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 6899852, issued to ExxonMobil in 2005; (2) US Patent 20130333832, issued to LyondellBasell in 2013 Keywords: Ethene, PE, BASF, Tubular Reactor, ExxonMobil, LyondellBasell, Lupotech

Download or read book Hydrogen Chloride Production Cost Analysis HCl E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Anhydrous Hydrogen Chloride (HCl) production from hydrogen and chlorine. In this process, hydrogen and chlorine react in the gaseous phase in a plug flow reactor at elevated temperatures forming HCl. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Hydrogen Chloride, Direct Synthesis

Download or read book Polyethylene Furanoate Production Cost Analysis PEF E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production from monoethylene glycol (MEG) and 2,5-furandicarboxylic acid (FDCA). In this process, FDCA and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF: melt-phase polymerization and solid-state polymerization. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) WO Patent 2015137807, issued to Furanix Technologies in 2015; (2) US Patent 6749821 issued to UOP in 2004 Keywords: Polyethylene Furanoate, Polyethylene 2,5-Furandicarboxylate, PEF, Green PEF, FDCA, MEG

Download or read book FDCA Production from Glucose Cost Analysis FDCA E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of 2,5-Furandicarboxylic Acid (FDCA) production from glucose syrup via the furan pathway. The process examined is similar to the Avantium YXY process, which is being scaled up to become a commercial process. In this process, glucose is isomerized to fructose. Then, fructose is converted to methoxy methyl furan (MMF) intermediate, which is oxidized to FDCA. The process uses a 70 wt% glucose-water syrup as raw material and generates methyl acetate and methyl levulinate as by-products. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 20100299991, issued to Furanix Technologies B.V. in 2010; (2) US Patent 8519167, issued to Furanix Technologies B.V. in 2013; (3) US Patent 20160024039, issued to Furanix Technologies B.V. in 2016 Keywords: Polyethylene Furanoate, PEF, Green FDCA, Hydroxyl Methyl Furfural, HMF, Purified Terephthalic Acid