Download or read book Scrape off Layer Modeling Using Coupled Plasma and Neutral Transport Codes written by Bastiaan Johan Braams and published by . This book was released on 1992 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scrape off Layer Modeling Using Coupled Plasma and Neutral Transport Codes written by and published by . This book was released on 1992 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: An effort is made to refine the neutral transport model used in the B2 edge plasma code by coupling it to the DEGAS Monte Carlo code. Results are discussed for a simulation of a high recycling divertor. It appears that on the order of 100 iterations between the two codes are required to achieve a converged solution. However, the amount of computer time used in the DEGAS simulations is large, making complete runs impractical for design purposes. On the other hand, the differences in the resulting plasma parameters when compared to the B2 analytic neutrals model indicate that it would be worthwhile to explore techniques for speeding up the control system of codes.

Download or read book Coupled Two dimensional Edge Plasma and Neutral Gas Modeling of Tokamak Scrape off layers written by and published by . This book was released on 1992 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this study is to devise a detailed description of the tokamak scrape-off-layer (SOL), which includes the best available models of both the plasma and neutral species and the strong coupling between the two in many SOL regimes. A good estimate of both particle flux and heat flux profiles at the limiter/divertor target plates is desired. Peak heat flux is one of the limiting factors in determining the survival probability of plasma-facing-components at high power levels. Plate particle flux affects the neutral flux to the pump, which determines the particle exhaust rate. A technique which couples a two-dimensional (2-D) plasma and a 2-D neutral transport code has been developed (coupled code technique), but this procedure requires large amounts of computer time. Relevant physics has been added to an existing two-neutral-species model which takes the SOL plasma/neutral coupling into account in a simple manner (molecular physics model), and this model is compared with the coupled code technique mentioned above. The molecular physics model is benchmarked against experimental data from a divertor tokamak (DIII-D), and a similar model (single-species model) is benchmarked against data from a pump-limiter tokamak (Tore Supra). The models are then used to examine two key issues: free-streaming-limits (ion energy conduction and momentum flux) and the effects of the non-orthogonal geometry of magnetic flux surfaces and target plates on edge plasma parameter profiles.

Download or read book Coupled Plasma neutral Transport Model for the Scrape off Region written by and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of the scrape-off region requires treatment of the plasma transport along and across the field lines and inclusion of the neutral transport effects. A method for modeling the scrape-off region that is presented here uses separate models for each of these aspects that are coupled together through an iteration procedure that requires only minimal numerical effort. The method is applied here to estimate the neutral pumping rates in the pump-limiter and divertor options for a proposed deuterium-tritium (D-T) ignition experiment. High neutral recycling in the vicinity of the neutralizer plate dramatically affects pumping rates for both the pump-limiter and divertor. In both cases, the plasma flow into the channel surrounding the neutralizer plate is greatly reduced by the neutral recycling. The fraction of this flow that is pumped can be large (> 50%), but in general it is dependent on the particular geometry and plasma conditions. It is estimated that pumping speeds approximately greater than 105 L/s are adequate for the exhaust requirements in the pump-limiter and the divertor cases. Also, high neutral recycling on the front surface of the limiter tends to increase the neutral pumping rate.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Diagnostics for Experimental Thermonuclear Fusion Reactors 2 written by Peter E. Stott and published by Springer Science & Business Media. This book was released on 1998-04-30 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings collects the papers presented at the workshop on "Diagnostics for Experimental Fusion Reactors" held at Villa Monastero, Varenna (Italy) September 4-12, 1997. This workshop was the seventh organized by the International School of Plasma Physics "Piero Caldirola" on the topic of plasma diagnostics and the second devoted to the diagnostic studies for the International Thermonuclear Experimental Reactor (ITER). The proceedings of the first workshop on ITER diagnostics were published by Plenum Press in 1996 with the title "Diagnostics for Experimental Thermonuclear Fusion Reactors". While many of the ideas and studies reported in the first workshop remain valid, there has been sub stantial progress in the design and specification of many diagnostics for ITER. This moti vated a second workshop on this topic and the publication of a new book of proceedings. ITER is a joint venture between Europe, Japan, Russia and USA in the field of con trolled thermonuclear fusion research. The present aim of ITER is to design an experimental fusion reactor that can demonstrate ignition and sustained burn in a magnetically confined plasma. To achieve this goal, a wide range of plasma parameters will have to be measured reliably. It is also anticipated that diagnostics will be used much more extensively as input to control systems on ITER than on present fusion devices and this will require increased relia bility and long-term stability.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fusion Energy Update written by and published by . This book was released on 1986 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Analysis of the DIII D Tokamak Scrape off Layer and Divertor written by Quang Thanh Nguyen and published by . This book was released on 1995 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Issues in Nuclear High Energy Plasma Particle and Condensed Matter Physics 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 1163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about High Energy Physics. The editors have built Issues in Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about High Energy Physics in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1993 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Models and Applications of the UEDGE Code written by and published by . This book was released on 1996 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transport of particles and energy from the core of a tokamak to nearby material surfaces is an important problem for understanding present experiments and for designing reactor-grade devices. A number of fluid transport codes have been developed to model the plasma in the edge and scrape-off layer (SOL) regions. This report will focus on recent model improvements and illustrative results from the UEDGE code. Some geometric and mesh considerations are introduced, followed by a general description of the plasma and neutral fluid models. A few comments on computational issues are given and then two important applications are illustrated concerning benchmarking and the ITER radiative divertor. Finally, we report on some recent work to improve the models in UEDGE by coupling to a Monte Carlo neutrals code and by utilizing an adaptive grid.

Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1983 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1992 with total page 1496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Atomic and Plasma material Interaction Processes in Controlled Thermonuclear Fusion written by Ratko K. Janev and published by Elsevier Publishing Company. This book was released on 1993 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic and plasma-material interaction processes play an important role in thermonuclear fusion plasmas and the knowledge of these processes has a significant impact on fusion energy research and development. The present volume provides a comprehensive survey of atomic and plasma-material interaction aspects of controlled thermonuclear fusion. The review articles included in this volume describe the role of atomic and plasma-material interaction processes in the currently most active fusion research areas and emphasize the need for accurate quantitative information on these processes for resolving many outstanding issues in fusion research and reactor design development such as plasma energy balance, particle transport and confinement, impurity control, thermal power and helium exhaust, plasma heating and fuelling, edge plasma physics, development of fusion reactor plasma facing components and plasma diagnostics and modelling.

Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1978 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: