Download or read book Scienza delle Costruzioni 2 written by Alberto Carpinteri and published by Società Editrice Esculapio. This book was released on 2023-06-01 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: La Scienza delle Costruzioni 2 è un ramo dell'ingegneria civile che si occupa dell'analisi dei comportamenti strutturali avanzati e complessi delle costruzioni. È una continuazione del corso di Scienza delle Costruzioni 1, che fornisce le basi teoriche e i principi fondamentali per l'analisi delle strutture. In Scienza delle Costruzioni 2, si studiano principalmente le strutture più complesse, come ponti, grattacieli, cupole, strutture reticolari, e così via. L'obiettivo principale è comprendere il comportamento strutturale di queste costruzioni e analizzarne la stabilità, la resistenza, la flessibilità e la sicurezza sotto carichi statici e dinamici. Durante il corso, vengono approfonditi argomenti come la teoria dell'elasticità, l'analisi delle travi continue, la teoria delle piastre e delle gusci, la teoria delle travi reticolari e la teoria dei sistemi strutturali. Vengono anche introdotte metodologie di calcolo più avanzate, come i metodi degli elementi finiti, che consentono di analizzare comportamenti strutturali complessi in modo numerico. Lo studio della Scienza delle Costruzioni 2 è fondamentale per gli ingegneri civili, poiché fornisce le competenze necessarie per progettare e analizzare strutture complesse in modo sicuro ed efficiente. Gli ingegneri che si specializzano in questo settore possono lavorare nella progettazione di grandi infrastrutture, nella costruzione di edifici ad alta quota o nella progettazione di strutture speciali, come stadi o ponti sospesi. È importante sottolineare che la Scienza delle Costruzioni 2 richiede una solida base di conoscenze di matematica, fisica e meccanica delle strutture, così come una buona comprensione dei principi fondamentali della Scienza delle Costruzioni 1.
Download or read book Lezioni di scienza delle costruzioni written by Pizzetti and published by . This book was released on 1965 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anisotropic Doubly Curved Shells written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2019-11-01 with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present in depth several Higher-order Shear Deformation Theories (HSDTs) by means of a unified approach for the mechanical analysis of doubly-curved shell structures made of anisotropic and composite materials. In particular, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. The approach presented in this volume is completely general and represents a valid tool to investigate the structural behavior of many arbitrarily shaped structures. An isogeometric mapping procedure is also illustrated to this aim. Special attention is given also to advanced and innovative constituents, such as Carbon Nanotubes (CNTs), Variable Angle Tow (VAT) composites and Functionally Graded Materials (FGMs). In addition, several numerical applications are developed to support the theoretical models. Accurate, efficient and reliable numerical techniques able to approximate both derivatives and integrals are presented, which are respectively the Differential Quadrature (DQ) and Integral Quadrature (IQ) methods. Finally, two numerical techniques, named Strong Formulation Finite Element Method (SFEM) and Weak Formulation Finite Element Method (WFEM), are developed to deal with multi-element domains characterized by arbitrary shapes and discontinuities.
Download or read book Lezioni di scienza delle costruzioni 2 1 written by Giovanni Menditto and published by . This book was released on 2000 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book La scienza delle costruzioni II written by and published by . This book was released on 1927 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials with Complex Behaviour II written by Andreas Öchsner and published by Springer Science & Business Media. This book was released on 2012-01-04 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest developments and trends in advanced materials and their properties, the modeling and simulation of non-classical materials and structures, and new technologies for joining materials. It presents the developments of advanced materials and respective tools to characterize and predict the material properties and behavior.
Download or read book Lezioni di scienza delle costruzioni 2 2 written by Giovanni Menditto and published by . This book was released on 2000 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2016-05-17 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: The title, “Laminated Composite Doubly-Curved Shell Structures. Differential and Integral Quadrature. Strong Form Finite Elements” illustrates the theme treated and the prospective followed during the composition of the present work. The aim of this manuscript is to analyze the static and dynamic behavior of thick and moderately thick composite shells through the application of the Differential Quadrature (DQ) method. The book is divided into two volumes wherein the principal higher order structural theories are illustrated in detail and the mechanical behavior of doubly-curved structures are presented by several static and dynamic numerical applications. In particular, the first volume is mainly theoretical, whereas the second one is mainly related to the numerical DQ technique and its applications in the structural field. The numerical results reported in the present volume are compared to the one available in the literature, but also to the ones obtained through several codes based on the Finite Element Method (FEM). Furthermore, an advanced version of the DQ method, termed Strong Formulation Finite Element Method (SFEM), is presented. The SFEM solves the differential equations inside each element in the strong form and implements the mapping technique typical of the FEM.
Download or read book Corso di scienza delle costruzioni 2 written by Alberto Taliercio and published by . This book was released on 2002 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scienza delle costruzioni written by Alberto Carpinteri and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The History of the Theory of Structures written by Karl-Eugen Kurrer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book traces the evolution of theory of structures and strength of materials - the development of the geometrical thinking of the Renaissance to become the fundamental engineering science discipline rooted in classical mechanics. Starting with the strength experiments of Leonardo da Vinci and Galileo, the author examines the emergence of individual structural analysis methods and their formation into theory of structures in the 19th century. For the first time, a book of this kind outlines the development from classical theory of structures to the structural mechanics and computational mechanics of the 20th century. In doing so, the author has managed to bring alive the differences between the players with respect to their engineering and scientific profiles and personalities, and to create an understanding for the social context. Brief insights into common methods of analysis, backed up by historical details, help the reader gain an understanding of the history of structural mechanics from the standpoint of modern engineering practice. A total of 175 brief biographies of important personalities in civil and structural engineering as well as structural mechanics plus an extensive bibliography round off this work.
Download or read book Mechanics of laminated Composite doubly curvel shell structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2014-03-01 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over ten years of study and research on shell structures and on the Generalized Differential Quadrature method. The title, Mechanics of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials through the application of the Differential Quadrature (DQ) technique. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally Graded Materials” (FGMs). They are non-homogeneous materials, characterized by a continuous variation of the mechanical properties through a particular direction. The GDQ numerical solution is compared, not only with literature results, but also with the ones supplied and obtained through the use of different structural codes based on the Finite Element Method (FEM). Furthermore, an advanced version of GDQ method is also presented. This methodology is termed Strong Formulation Finite Element Method (SFEM) because it employs the strong form of the differential system of equations at the master element level and the mapping technique, proper of FEM. The connectivity between two elements is enforced through compatibility conditions.
Download or read book SCIENZA DELLE COSTRUZIONI written by A. CARPINTERI and published by . This book was released on 1992 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2017-01-09 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over thirteen years of study and research on shell structures. The title, Theory of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally graded materials” (FGMs). They are non-homogeneous materials, characterized by a continuous varia on of the mechanical properties through a particular direction. In particular, the present manuscript was written as an attempt to show, in an easy way, the theoretical aspects of doubly-curved composite shell structures. Furthermore, it focuses only on the theoretical aspects related to laminated composite doubly-curved shell structures and represents a shortened version of the book entitled: Mechanics of Laminated Composite Doubly-Curved Shell Structures by the same authors, wherein also the numerical part has been presented. The present volume is aimed at Master degree and PhD students in structural and applied mechanics, as well as experts in these fields. The present volume is divided into six chapters, in which static and dynamic analyses of several structural elements are provided in detail. Furthermore, the results of the adopted numerical technique are presented for several problems such as different loading and boundary conditions.
Download or read book Hygro Thermo Magneto Electro Elastic Theory of Anisotropic Doubly Curved Shells written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2023-10-13 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present in depth several Higher-order Shear Deformation Theories (HSDTs) by means of a unified approach for studying the Hygro-Thermo-Magneto-Electro- Elastic Theory of Anisotropic Doubly-Curved Shells. In particular, a general coupled multifield theory regarding anisotropic shell structures is provided. The three-dimensional multifield problem is reduced in a two-dimensional one following the principles of the Equivalent Single Layer (ESL) approach and the Equivalent Layer-Wise (ELW) approach, setting a proper configuration model. According to the adopted configuration assumptions, several Higher-order Shear Deformation Theories (HSDTs) are obtained. Furthermore, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. The approach presented in this volume is completely general and represents a valid tool to investigate the physical behavior of many arbitrarily shaped structures. An isogeometric mapping procedure is also illustrated to this aim. Special attention is given also to advanced and innovative constituents, such as Carbon Nanotubes (CNTs), Variable Angle Tow (VAT) composites and Functionally Graded Materials (FGMs). In addition, several numerical applications are used to support the theoretical models. Accurate, efficient and reliable numerical techniques able to approximate both derivatives and integrals are considered, which are respectively the Differential Quadrature (DQ) and Integral Quadrature (IQ) methods. The Theory of Composite Thin Shells is derived in a simple and intuitive manner from the theory of thick and moderately thick shells (First-order Shear Deformation Theory or Reissner- Mindlin Theory). In particular, the Kirchhoff-Love Theory and the Membrane Theory for composite shells are shown. Furthermore, the Theory of Composite Arches and Beams is also exposed. In particular, the equations of the Timoshenko Theory and the Euler-Bernoulli Theory are directly deducted from the equations of singly-curved shells of translation and of plates.
Download or read book Lezioni di scienza della costruzioni written by Franco Levi and published by . This book was released on 1970 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfaces in Medicine and Mechanics 2 written by K.R. Williams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Interfaces Conference was held at Swansea in April 1988 and represented the then state of the art of the science of implant surgery. The motivation for the initial venture was a supposed need for a closer interaction and dialogue between the clinician and scientist working in this area. As expressed in the Preface to the first Conference, we felt that the interface was represented graphically, scientifically and psychologically by the drawings of Edgar Rubins (1915), again widely used in the literature to the present Proceedings. The first Conference, we believe, achieved the aims of the organisers in bringing together scientists and clinicians towards an exchange of ideas by logically pursuing the sequence of events in clinical implant surgery. The present Conference, in collaboration with our Italian colleagues, has also attempted to achieve the same aims by examining the behaviour of implants constructed of a variety of materials in both hard and soft tissue. Many contributions in the conference employed the technique of finite element analysis, both for design and optimisation purposes, particularly in relation to bone remodelling. Indeed, this particular aspect of the Conference led to much debate and will require a major examination of the many levels of physical, chemical and biomechanical interactive behaviour of the implant and its environment. All this natural behaviour was presented and discussed, but difficulties and failures remain with such procedures and we feel it is only by continuing such meetings that we progress in this difficult area of clinical science.
