Download or read book Scientific Interfaces and Technological Applications written by National Research Council Staff and published by . This book was released on with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific Interfaces and Technological Applications written by and published by National Academies. This book was released on 1986-01-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adsorption Fundamental Processes and Applications written by Mehrorang Ghaedi and published by Academic Press. This book was released on 2021-03-19 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption: Fundamental Processes and Applications, Volume 33 in the Interface Science and Technology Series, discusses the great technological importance of adsorption and describes how adsorbents are used on a large scale as desiccants, catalysts, catalyst supports, in the separation of gases, the purification of liquids, pollution control, and in respiratory protection. Finally, it explores how adsorption phenomena play a vital role in many solid-state reactions and biological mechanisms, as well as stressing the importance of the widespread use of adsorption techniques in the characterization of surface properties and the texture of fine powders. Covers the fundamental aspects of adsorption process engineering Reviews the environmental impact of key aquatic pollutants Discusses and analyzes the importance of adsorption processes for water treatment Highlights opportunity areas for adsorption process intensification Edited by a world-leading researcher in interface science

Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers

Download or read book An Introduction to Green Nanotechnology written by Mahmoud Nasrollahzadeh and published by Academic Press. This book was released on 2019-03-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Green Nanotechnology, Volume 28, provides students, scientists and chemical engineers with an overview of several types of nanostructures, discusses the synthesis and characterization of nanostructures, and provides applications of nanotechnology in daily life. The book offers a foundation to green nanotechnology by explaining why green nanotechnology is important. Covers biological sources in green nanotechnology, antioxidants, green nanostructures, mechanism, synthesis and characterization. The book ends with an evaluation of the risks of nanotechnology in human life and future perspectives. Introduces novel sources of plants having a high potential to be used as bio media to synthesize nanostructures Provides phytochemical properties and antioxidant potential, and their effects on stability, morphology and size of green nanostructures Includes a medicinal and technological comparison of green synthesized nanostructures to nano-products from non-green methods Uses accessible language, avoiding complex concepts of mathematics, biology and chemistry

Download or read book Photocatalysis Fundamental Processes and Applications written by Mehrorang Ghaedi and published by Academic Press. This book was released on 2021-03-19 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalysis: Fundamental Processes and Applications, Volume 32 in the Interface Science and Technology Series, discusses the fundamental aspects of photocatalysis and its process and applications to the decontamination of wastewater, hydrogen production via water splitting, and photo reduction of carbon dioxide to hydrocarbon. The book discusses the fundamental aspects of all applications together with their proper mechanisms, thus providing essential information for deep research in the area of clean environment and green energy production. Provides background on the fundamental and experimental processes of photocatalysis Covers photocatalysis and its impact on creating a clean environment and energy sources Applies photocatalysis to the decontamination of wastewater, hydrogen production via water splitting, and photo reduction of carbon dioxide to hydrocarbon Edited by a world-leading researcher in interface science

Download or read book Inhaled Particles written by Chiu-sen Wang and published by Elsevier. This book was released on 2005-01-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaled Particles integrates all that is known about inhaled particles in a unified treatment. It aims to provide a scientific framework essential to a reasonable understanding of inhaled particles. The emphasis is placed on demonstrating the key roles of lung morphology on airflow and particle transport as well as identifying physical and biological factors that influence deposition. Special attention is paid to maintaining consistency of treatment and a balance between theoretical modeling and experimental measurements. The book covers all important aspects of inhaled particles including inhalability, aerosol dispersion, particle deposition, and clearance. It reviews concisely the basic background of lung morphology, respiratory physiology, aerodynamics, and aerosol science pertinent to the subject. Essential aspects of health effects and applications are also included. An easy-to-read, self contained introduction to the field An excellent source of updated research information Useful for students and professionals in aerosol science, environmental health science, occupational hygiene, health physics and biomedical engineering

Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.

Download or read book Tissue Engineering written by Yoshito Ikada and published by Elsevier. This book was released on 2011-08-29 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tissue engineering is an emerging interdisciplinary field, occupying a major position in the regenerative medicine that aims at restoring lost or damaged tissues and organs with use of cells. Regenerative medicine includes cellular therapy and tissue engineering. In general, the former treats patients by cell infusion alone, while tissue engineering needs biomaterials and growth factors in addition to cells. Biomaterials function in tissue engineering as the scaffold or template for cells to proliferate, differentiate, and produce matrices. Tissue Engineering focuses on the fundamentals (biomaterials, scaffolds, cell cultures, bioreactors, animal models etc.), recent animal and human trials, and future prospects regarding tissue engineering. Almost twenty years have passed since the advent of the tissue engineering, whicht uses cells, scaffolds, and growth factors for regeneration of neotissues. The number of investigations on tissue engineering is still increasing tremendously. Nevertheless, it seems likely that the number of reports describing clinical trials of tissue engineering will remain very limited. Even the studies that apply tissue engineering research to large animals have not been performed yet on a large scale. The major objective of this book is to address this question from a science and technology point of view, and to describe the principles of basic technologies that have currently been developed by numerous research groups. Helps reader understand the key issues required for promotion of clinical trials in tissue engineering Covers in full the issues related to tissue engineering Looking at current technologies in the field

Download or read book Foam and Foam Films written by D. Exerowa and published by Elsevier. This book was released on 1997-12-11 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main physicochemical aspects of foam and foam films such as preparation, structure, properties, are considered, giving a special emphasis on foam stability. It is shown that the foam and foam films are an efficient object in the study of various surface phenomena and in establishing regularities common for different interfaces, in particular, water/oil interface. The techniques and results on foam films have an independent meaning and involve the latest achievement in this field, with a focus on authors' results. The book has an expressed monographic character. It reveals joint ideas, i.e. the quantitative approach in treating foams is based on foam film behaviour and the techniques for controlling the foam liquid content, developed by the authors. A major contribution represents the independent consideration of formation and stability of foam films in theoretical and experimental aspects. No monograph published so far reveals these topics in the mentioned manner. Data and information about foams, physicochemical characterization of surfactants, phospholipids and polymers can also be found. Furthermore, the book provides information about: techniques involved in the study of foam films and foam structure and properties; foam drainage; processes of destruction in gravitational and centrifugal fields; reasons for stability of films and their role in the processes running in the foam; mechanical, rheological, optical, thermophysical, electrical properties; foam destruction upon addition of antifoams (mechanism of destruction, techniques, application); scientific principles of controlling foam properties and their application in foam separation and concentration; enhanced oil recovery; thermodynamic and non-equilibrium properties of foam films, stabilized by surfactants, phospholipids and polymers; techniques for the study of surface forces; formation and stability of foam films; black films, including bilayers; new theories of stability of amphiphile bilayer; experiments involved in this stability; application in biology and medicine.

Download or read book Surface Complexation Modelling written by Johannes Lutzenkirchen and published by Elsevier. This book was released on 2006-09-02 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Complexation Modelling deals with various aspects associate to the modelling of solutes adsorption from of solutes from aqueous solutions to minerals. The individual contributions cover fundamental aspects and applications. Applications cover case studies and present consistent surface complexation parameter sets. The model approaches range from simplistic to mechanistic. More fundamental contributions address underlying phenomena or stress the opportunities of modern computational methods. Several mineral systems are covered, including goethite, gibbsite, clay minerals etc.Surface Complexation Modelling presents the state-of-the-art of surface complexation modelling and suggests ideas for further model development. A number of chapters are authored by scientists working on nuclear waste storage, where the retention of radionuclides contributes to preventing radionuclide migration from the repository to the biosphere. Other contributions come from soil and environmental chemists with an interest in reactive transport of pollutants in soils or aquifers. Covering a wide range of disciplines Bringing together contributions from experts in the field Providing a balance between the theoretical and applied aspects

Download or read book Physics Through the 1990s written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Drops and Bubbles in Interfacial Research written by D. Mobius and published by Elsevier. This book was released on 1997-12-09 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: The shape of drops and bubbles is the centre of interest for many interfacial scientists. This book describes the most recent accomplishments to make use of drops and bubbles in fundamental research and application. After a general introduction into the mechanics of liquid menisci, chapters are dedicated to methods based on drops or bubbles. The chapters about the three main drop experiments provide the theoretical basis, a description of experimental set-ups, specific advantages and disadvantages, correction and calibration problems, experimental examples and their interpretation: pendent and sessile drop, drop volume, and spinning drop technique. The chapter about capillary pressure methods summarises different techniques and gives examples of applications, for instance measurements under microgravity. The maximum bubble pressure technique as a particular capillary pressure method is described, with emphasis on the most recent developments which made this technique applicable to extremely short adsorption times, down to the range of milliseconds and less. Problems connected with aerodynamics and hydrodynamics are discussed and used to show the limits of this widely used standard method. The oscillating bubble technique provides information not available by other techniques, for example about the dilational rheology of adsorption layers and relaxation processes at the interface. The description of rising bubbles in surfactant solutions will contain the hydrodynamic basis as well as the theoretical description of the effect of interfacial layers on the movement of bubbles. Besides the theoretical basis experimental data, such as water purification, flotation processes etc. and the relevance for practical applications will be presented. The chapter about lung alveols demonstrates how important bubbles built by biological membranes are in everyday life. The relevance for medicine and biology as well as model studies is discussed. An important example for the application of drops is metallurgy, where the surface tension of metals and alloys is an important parameter for many applications. The chapters on drop shape analysis by using fibre technique and on force measurements between emulsion droplets are of much practical relevance. Lists of references and symbols are given separately at the end of each chapter while a common subject index is given at the end of the book.

Download or read book Emerging Natural and Tailored Nanomaterials for Radioactive Waste Treatment and Environmental Remediation written by Changlun Chen and published by Academic Press. This book was released on 2019-04-25 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Natural and Tailored Nanomaterials for Radioactive Waste Treatment and Environmental Remediation: Principles and Methodologies, Volume 29 provides an overview of the most important radionuclide sources in the environment, their interaction with environmental media, and appropriate remediation techniques. The book focuses on the assessment of radionuclide sorption behavior in contaminated sites and the synthesis of new materials for radionuclides remediation through sorption concepts. Chapters investigate the main interaction mechanisms between toxic/radioactive metal ions with natural and manmade materials, natural clay minerals and oxides, and novel nanomaterials, such as ordered mesoporous silicas, carbon nanotubes, graphene, and metal-organic framework-based materials. Techniques and models discussed include kinetics analysis, thermodynamic analysis, surface complexation models, spectroscopic techniques, and theoretical calculations. Provides a systemic discussion on the interactions between toxic and radioactive metal ions and natural and manmade materials Helps to select the best approach to remove toxic/radioactive metal ions from a surface Edited by a scientific authority in toxic/radioactive metal ion interactions

Download or read book Materials Science and Technology written by National Research Council and published by National Academies Press. This book was released on 2003-05-16 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report assesses the current state of chemistry and chemical engineering at the interface with materials science and identifies challenges for research. Recent advances are blurring the distinction between chemistry and materials science and are enabling the creation of new materials that, to date, have only been predicted by theory. These advances include a greater ability to construct materials from molecular components, to design materials for a desired function, to understand molecular "self-assembly, and to improve processes by which the material is "engineered" into the final product.

Download or read book Nanoparticle Technologies written by Farid Bensebaa and published by Academic Press. This book was released on 2012-12-31 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a good introductory work to nanoparticle technology. It consists of nine complementary chapters that can be read independently. This book covers promising nanoparticles fabrication technologies with a focus on scalable processes. Integration of nanoparticles into 2D and 3D structures are covered in detail. The most promising applications of nanoparticles in the energy, optoelectronic and biomedical sectors are summarized and discussed. Current issues and challenges related to nanoparticles production and utilisation are also discussed in the book. Complete and simple overview of the field Contains practical examples that makes the book also accessible for industrialists, engineers and managers Chapters can be read relatively independently so experienced researchers can go directly to the them of interest Advantages, drawbacks and challenges are described with practical examples

Download or read book Computer Simulations of Surfaces and Interfaces written by Burkhard Dünweg and published by Springer Science & Business Media. This book was released on 2003-12-31 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Albena, Bulgaria, from 9 to 20 September 2002