Download or read book Scientific Computing on Supercomputers III written by J.T. Devreese and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Workshop on "The Use of Supercomputers in Theoretical Science" took place on January 24 and 25, 1991, at the University of Antwerp (UIA), Antwerpen, Belgium. It was the sixth in a series of workshops, the fIrst of which took place in 1984. The principal aim of these workshops is to present the state of the art in scientific large-scale and high speed-computation. Computational science has developed into a third methodology equally important now as its theoretical and experimental companions. Gradually academic researchers acquired access to a variety of supercomputers and as a consequence computational science has become a major tool for their work. It is a pleasure to thank the Belgian National Science Foundation (NFWO-FNRS) and the Ministry of ScientifIc Affairs for sponsoring the workshop. It was organized both in the framework of the Third Cycle "Vectorization, Parallel Processing and Supercomputers" and the "Governemental Program in Information Technology". We also very much would like to thank the University of Antwerp (Universitaire Instelling Antwerpen -VIA) for fInancial and material support. Special thanks are due to Mrs. H. Evans for the typing and editing of the manuscripts and for the preparation of the author and subject indexes. J.T. Devreese P.E. Van Camp University of Antwerp July 1991 v CONlENTS High Perfonnance Numerically Intensive Applications on Distributed Memory Parallel Computers .................... . F.W. Wray Abstract ......................................... .
Download or read book An Introduction to High performance Scientific Computing written by Lloyd Dudley Fosdick and published by MIT Press. This book was released on 1996 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for undergraduates, An Introduction to High-Performance Scientific Computing assumes a basic knowledge of numerical computation and proficiency in Fortran or C programming and can be used in any science, computer science, applied mathematics, or engineering department or by practicing scientists and engineers, especially those associated with one of the national laboratories or supercomputer centers. This text evolved from a new curriculum in scientific computing that was developed to teach undergraduate science and engineering majors how to use high-performance computing systems (supercomputers) in scientific and engineering applications. Designed for undergraduates, An Introduction to High-Performance Scientific Computing assumes a basic knowledge of numerical computation and proficiency in Fortran or C programming and can be used in any science, computer science, applied mathematics, or engineering department or by practicing scientists and engineers, especially those associated with one of the national laboratories or supercomputer centers. The authors begin with a survey of scientific computing and then provide a review of background (numerical analysis, IEEE arithmetic, Unix, Fortran) and tools (elements of MATLAB, IDL, AVS). Next, full coverage is given to scientific visualization and to the architectures (scientific workstations and vector and parallel supercomputers) and performance evaluation needed to solve large-scale problems. The concluding section on applications includes three problems (molecular dynamics, advection, and computerized tomography) that illustrate the challenge of solving problems on a variety of computer architectures as well as the suitability of a particular architecture to solving a particular problem. Finally, since this can only be a hands-on course with extensive programming and experimentation with a variety of architectures and programming paradigms, the authors have provided a laboratory manual and supporting software via anonymous ftp. Scientific and Engineering Computation series
Download or read book Scientific Computing on Supercomputers II written by J.T. Devreese and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Workshop on "The Use of Supercomputers in Theoretical Science" took place on November 29 and 30, 1989 at the University of Antwerp (UIA), Antwerpen, Belgium. It was the fifth in a series of workshops, the first of which took place in 1984. The principal aim of these workshops is to present the state-of-the-art in scientific large scale and high speed computation. Computational science has developed into a third methodology equally important now as its theoretical and experimental companions. Gradually academic researchers acquired access to a variety of supercomputers and as a consequence computational science has become a major tool for their work. It is a pleasure to thank the Belgian National Science Foundation (NFWO-FNRS) and the Ministry of Scientific Affairs for sponsoring the workshop. It was organized both in the framework of the Third Cycle "Vectorization, Parallel Processing and Supercomputers" and the "Governemental Program in Information Technology"~ We also very much would like to thank the University of Antwerp (Universitaire Instelling Antwerpen - UIA) for financial and material support. Special thanks are due to Mrs. H. Evans for the typing and editing of the manuscripts and for the preparation of the author and subject index.
Download or read book Parallel Processing for Scientific Computing written by Michael A. Heroux and published by SIAM. This book was released on 2006-01-01 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel processing has been an enabling technology in scientific computing for more than 20 years. This book is the first in-depth discussion of parallel computing in 10 years; it reflects the mix of topics that mathematicians, computer scientists, and computational scientists focus on to make parallel processing effective for scientific problems. Presently, the impact of parallel processing on scientific computing varies greatly across disciplines, but it plays a vital role in most problem domains and is absolutely essential in many of them. Parallel Processing for Scientific Computing is divided into four parts: The first concerns performance modeling, analysis, and optimization; the second focuses on parallel algorithms and software for an array of problems common to many modeling and simulation applications; the third emphasizes tools and environments that can ease and enhance the process of application development; and the fourth provides a sampling of applications that require parallel computing for scaling to solve larger and realistic models that can advance science and engineering.
Download or read book Scientific Computing on Supercomputers written by J.T. Devreese and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Workshops on "The Use of Supercomputers in Theoretical Science" have become a tradition at the Univer sity of Antwerp, Belgium. The first one took place in 1984. This volume combines the proceedings of the second work shop (December 12, 1985), of the third (June 16, 1987) and of the fourth (June 9, 1988). The principal aim of the International Workshops is to present the state-of-the-art in scientific high speed computa tion. Indeed, during the past ten years computational science has become a third methodology with merits equal to the theo retical and experimental sciences. Regretfully, access to supercomputers remains limited for academic researchers. None theless, supercomputers have become a major tool for scientists in a wide variety of scientific fields, and they lead to a realistic solution of problems that could not be solved a decade ago. It is a pleasure to thank the Belgian National Science Foundation (NFWO-FNRS) for the sponsoring of all the workshops. These workshops are organized in the framework of the Third Cy cle "Vectorization, Parallel Processing and Supercomputers", which is also funded by the NFWO-FNRS. The other sponsor I want to thank is the University of Antwerp, where the workshops took place. The University of Antwerp (UIA), together with the NFWO-FNRS, are also the main sponsors of the ALPHA-project, which gives the scientists of Belgium the opportunity to obtain an easy supercomputer connection.
Download or read book Supercomputing and the Transformation of Science written by William J. Kaufmann and published by Times Books. This book was released on 1993 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Applications -- Physical Sciences and Engineering.
Download or read book Progress and Supercomputing in Computational Fluid Dynamics written by Murman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume, with the exception of the introductory chapter, consists of papers delivered at the workshop entitled "The Impact of Supercomputers on the Next Decade of Computational Fluid Dynamics," The workshop, which took place in Jerusalem, Israel during the week of December 16, 1984, was initiated by the National Science Foundation of the USA (NSF), by the Ministry of Science and Development, Israel (IMSD), and co-sponsored by the National Aeronautics and Space Administration (NASA), the Office of Scientific Research of the U.S. Air Force (AFOSR), Tel Aviv University and Massachusetts Institute of Technology. The introductory chapter attempts to summarize what transpired at the workshop. The genesis of the workshop was an agreement between NSF and Il1S, signed in the spring of 1983, to conduct a series of bi-national work shops and symposia. This workshop represented the first activity spon sored under the agreement. The undersigned were selected by their respective national bodies to act as co-coordinators and organizers of the workshop. The first question that we faced was to decide upon a topic. In the past few years the field of CFD has mushroomed and consequently there have been many meetings, symposia, workshops, congresses, etc.
Download or read book Getting Up to Speed written by National Research Council and published by National Academies Press. This book was released on 2005-03-03 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercomputers play a significant and growing role in a variety of areas important to the nation. They are used to address challenging science and technology problems. In recent years, however, progress in supercomputing in the United States has slowed. The development of the Earth Simulator supercomputer by Japan that the United States could lose its competitive advantage and, more importantly, the national competence needed to achieve national goals. In the wake of this development, the Department of Energy asked the NRC to assess the state of U.S. supercomputing capabilities and relevant R&D. Subsequently, the Senate directed DOE in S. Rpt. 107-220 to ask the NRC to evaluate the Advanced Simulation and Computing program of the National Nuclear Security Administration at DOE in light of the development of the Earth Simulator. This report provides an assessment of the current status of supercomputing in the United States including a review of current demand and technology, infrastructure and institutions, and international activities. The report also presents a number of recommendations to enable the United States to meet current and future needs for capability supercomputers.
Download or read book System Simulation and Scientific Computing Part II written by Tianyuan Xiao and published by Springer. This book was released on 2012-10-08 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Three-Volume-Set CCIS 323, 324, 325 (AsiaSim 2012) together with the Two-Volume-Set CCIS 326, 327 (ICSC 2012) constitutes the refereed proceedings of the Asia Simulation Conference, AsiaSim 2012, and the International Conference on System Simulation, ICSC 2012, held in Shanghai, China, in October 2012. The 267 revised full papers presented were carefully reviewed and selected from 906 submissions. The papers are organized in topical sections on modeling theory and technology; modeling and simulation technology on synthesized environment and virtual reality environment; pervasive computing and simulation technology; embedded computing and simulation technology; verification, validation and accreditation technology; networked modeling and simulation technology; modeling and simulation technology of continuous system, discrete system, hybrid system, and intelligent system; high performance computing and simulation technology; cloud simulation technology; modeling and simulation technology of complex system and open, complex, huge system; simulation based acquisition and virtual prototyping engineering technology; simulator; simulation language and intelligent simulation system; parallel and distributed software; CAD, CAE, CAM, CIMS, VP, VM, and VR; visualization; computing and simulation applications in science and engineering; computing and simulation applications in management, society and economics; computing and simulation applications in life and biomedical engineering; computing and simulation applications in energy and environment; computing and simulation applications in education; computing and simulation applications in military field; computing and simulation applications in medical field.
Download or read book Applications of Supercomputers in Engineering II written by C.A. Brebbia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises an edited version of the Proceedings of the 2nd Interna tional Conference on Applications of Supercomputers in Engineering which took place at the Massachusetts Institute of Technology, Cambridge, USA during August 1991. The Conference was organized by the Wessex Insti tute of Technology, Southampton, UK with the support of the International Society for Boundary Elements. The first International Conference on Ap plications of Supercomputers in Engineering held in Southampton, UK in September 1989 was a very successful meeting and the resulting Conference Proceedings are now widely distributed throughout the world. The revolutionary aspects of the next generation of computers are now fully recognised by many engineers and scientists. Vector and parallel computers form the basis of the computing power needed to address the complex prob lems with which engineers are faced. The new machines not only increase the size of the problems which can be solved, but also require a different computational approach to obtain the most efficient results.
Download or read book Scientific Computing in Chemical Engineering II written by Frerich Keil and published by Springer Science & Business Media. This book was released on 1999-05-19 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of modern methods in numerical mathematics on problems in chemical engineering is essential for designing, analyzing and running chemical processes and even entire plants. Scientific Computing in Chemical Engineering II gives the state of the art from the point of view of numerical mathematicians as well as that of engineers. The present volume as part of a two-volume edition covers topics such as computer-aided process design, combustion and flame, image processing, optimization, control, and neural networks. The volume is aimed at scientists, practitioners and graduate students in chemical engineering, industrial engineering and numerical mathematics.
Download or read book Massively Parallel Processing Applications and Development written by L. Dekker and published by Elsevier. This book was released on 2013-10-22 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions of a diverse selection of international hardware and software specialists are assimilated in this book's exploration of the development of massively parallel processing (MPP). The emphasis is placed on industrial applications and collaboration with users and suppliers from within the industrial community consolidates the scope of the publication. From a practical point of view, massively parallel data processing is a vital step to further innovation in all areas where large amounts of data must be processed in parallel or in a distributed manner, e.g. fluid dynamics, meteorology, seismics, molecular engineering, image processing, parallel data base processing. MPP technology can make the speed of computation higher and substantially reduce the computational costs. However, to achieve these features, the MPP software has to be developed further to create user-friendly programming systems and to become transparent for present-day computer software. Application of novel electro-optic components and devices is continuing and will be a key for much more general and powerful architectures. Vanishing of communication hardware limitations will result in the elimination of programming bottlenecks in parallel data processing. Standardization of the functional characteristics of a programming model of massively parallel computers will become established. Then efficient programming environments can be developed. The result will be a widespread use of massively parallel processing systems in many areas of application.
Download or read book Applied Parallel Computing Advanced Scientific Computing written by Juha Fagerholm and published by Springer. This book was released on 2003-08-03 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Applied Parallel Computing, PARA 2002, held in Espoo, Finland, in June 2002. The 50 revised full papers presented together with nine keynote lectures were carefully reviewed and selected for inclusion in the proceedings. The papers are organized in topical sections on data mining and knowledge discovery, parallel program development, practical experience in parallel computing, computer science, numerical algorithms with hierarchical memory optimization, numerical methods and algorithms, cluster computing, grid and network technologies, and physics and applications.
Download or read book Visualization in Scientific Computing written by Michel Grave and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visualization in scientific computing is getting more and more attention from many people. Especially in relation with the fast increase of com puting power, graphic tools are required in many cases for interpreting and presenting the results of various simulations, or for analyzing physical phenomena. The Eurographics Working Group on Visualization in Scientific Com puting has therefore organized a first workshop at Electricite de France (Clamart) in cooperation with ONERA (Chatillon). A wide range of pa pers were selected in order to cover most of the topics of interest for the members of the group, for this first edition, and 26 of them were presented in two days. Subsequently 18 papers were selected for this volume. 1'he presentations were organized in eight small sessions, in addition to discussions in small subgroups. The first two sessions were dedicated to the specific needs for visualization in computational sciences: the need for graphics support in large computing centres and high performance net works, needs of research and education in universities and academic cen tres, and the need for effective and efficient ways of integrating numerical computations or experimental data and graphics. Three of those papers are in Part I of this book. The third session discussed the importance and difficulties of using stan dards in visualization software, and was related to the fourth session where some reference models and distributed graphics systems were discussed. Part II has five papers from these sessions.
Download or read book Scientific Computing and Automation Europe 1990 written by E.J. Karjalainen and published by Elsevier. This book was released on 1990-12-17 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a large selection of papers presented at the second European Scientific Computing and Automation meeting (SCA 90 (Europe)) which was held in June 1990 in Maastricht, The Netherlands. The increasing use of computers for making measurements, interpreting data, and filing results brings a new unity to science. SCA concentrates on common computer-based tools which are useful in several disciplines. Practical problems in laboratory automation, robotics and information management with LIMS are covered in depth. The process of designing and acquiring a LIMS is described and standards for data transfer between instruments, between LIMS and instruments and between different LIMS are discussed. The applications of statistics and expert systems are covered in several chapters. Strategies for drug design are discussed with various practical examples. Finally the display of scientific results as images and computer-based animations is demonstrated by several examples with their color illustrations. The book should be of interest to those managing R&D projects, doing research in laboratories, acquiring or planning LIMS, designing instruments and laboratory automation systems and those involved in data analysis of scientific results.
Download or read book High Speed and Large Scale Scientific Computing written by Wolfgang Gentzsch and published by IOS Press. This book was released on 2009 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: This work combines selected papers from a July 2008 workshop held in Cetraro, Italy, with invited papers by international contributors. Material is in sections on algorithms and scheduling, architectures, GRID technologies, cloud technologies, information processing and applications, and HPC and GRID infrastructures for e-science. B&w maps, images, and screenshots are used to illustrate topics such as nondeterministic coordination using S-Net, cloud computing for on-demand grid resource provisioning, grid computing for financial applications, and the evolution of research and education networks and their essential role in modern science. There is no subject index. The book's readership includes computer scientists, IT engineers, and managers interested in the future development of grids, clouds, and large-scale computing. Gentzsch is affiliated with the DEISA Project and Open Grid Forum, Germany.
Download or read book 1989 National Science Foundation Authorization written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Science, Research, and Technology and published by . This book was released on 1988 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
