Download or read book Science Lab Gases written by Shirley Smith Duke and published by Cherry Lake. This book was released on 2011-08-01 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the book is on gases. The reader is encouraged to make predictions, perform purpose-driven research, and creatively solve problems presented about gases.
Download or read book Design and Construction of Laboratory Gas Pipelines written by James Moody and published by CRC Press. This book was released on 2019-03-13 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume, Design and Construction of Laboratory Gas Pipelines: A Practical Reference for Engineers and Professionals, focuses on design and installation of laboratory gas pipelines. It instructs design engineers, laboratory managers, and installation technicians on how to source the information and specifications they require for the design and installation of laboratory gas systems suitable for their intended use. The current use of specifications predominantly taken from medical gas standards for this type of work is not always suitable; these standards are for use with medical grade gases that have a purity level of 99.5%. The purity levels required in laboratories, however, start at 99.9% for general industrial use through to 99.9995% (Ultra High Purity (UHP)) and higher. Regular medical gas standards are also unsuitable for use with the oxidizing, flammable, and, in some instances, toxic gases that are regularly encountered in laboratories. As need for gas purity increases, the methodology used to design a piping system must vary to meet those parameters, and this reference provides the necessary information and resources. There are no comprehensive single sources of technical references currently available in this market, states the author, and the generally supplied specifications provided to the construction industry are usually generic and not specifically targeted for the gases in use. The results provide extremely poor quality designs and, in some instances, unusable systems. With over 40 years of specialization in the industry from project management to systems design, testing, and commissioning of projects with values in excess of $15 million, the author comprehensively fills that gap with this rich resource. Key features • provides information on types of laboratories that use laboratory gases and the equipment needed • explains the various methods of construction and the materials used to ensure that the purity of the gases remains as supplied from the manufacturers • incorporates the design methodology used to meet the various requirements of the laboratory and the information required to ensure that the correct engineering is provided • presents information on the purity levels of the gases and the data on the equipment used for pipelines and compatibility issues • presents an example of a simple laboratory gas specification that provides guidelines on the information necessary to provide a set of design documents
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
Download or read book Experiments with States of Matter written by Trevor Cook and published by The Rosen Publishing Group, Inc. This book was released on 2009-01-15 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kids will learn all about solids, liquids and gases through these fun and easy-to-follow experiments.
Download or read book Joe Joe the Wizard Brews Up Solids Liquids and Gases written by Eric Braun and published by Capstone. This book was released on 2012 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: A young wizard learns the differences between solids, liquids, and gases.
Download or read book Ghastly Gases written by Mike Clark and published by Strange Science and Explosive Experiments. This book was released on 2019-07 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solids Liquids Guess Who s Got Gas written by Michelle Houts and published by Simon and Schuster. This book was released on 2017-10-03 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autumn has arrived, and at Granite City Elementary School everyone is gearing up for the biggest and best event of the year: the Harvest Festival. The whole school is excited about the games, the contests, the food, and, most of all, the costumes! Everyone except Lucy. She doesn’t like dressing up, and has no desire to be a fairy princess or rock star, even for one day. But Lucy is excited about the new science unit Miss Flippo has started: the states of matter. Lucy and her friends understand solids and liquids. They’re easy. But gasses are more difficult to grasp. When the class goes on a field trip to an orchard and Stewart Swinefest eats too many apples, and gets a serious stomachache, Lucy suddenly understands that even if you can’t see gasses they can fill space and expand, and even make you move. And with Stewart feeling better, she has a really great idea for her Harvest Festival costume, too. The second book in a new chapter book series from IRA Children’s Book Award-winner, Michelle Houts, Solids, Liquids, Guess Who’s Got Gas draws on STEM themes and is aligned with curriculum guidelines to bring a love of science to young readers, inspiring them to start their own labs and explore their world.
Download or read book A Practical Guide to Gas Analysis by Gas Chromatography written by John Swinley and published by Elsevier. This book was released on 2019-06-28 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Gas Analysis by Gas Chromatography provides a detailed overview of the most important aspects of gas analysis by gas chromatography (GC) for both the novice and expert. Authors John Swinley and Piet de Coning provide the necessary information on the selection of columns and components, thus allowing the reader to assemble custom gas analysis systems for specific needs. The book brings together a wide range of disparate literature on this technique that will fill a crucial gap for those who perform different types of research, including lab operators, separation scientists, graduate students and academic researchers. This highly practical, up-to-date reference can be consulted in the lab to guide key decisions about proper setup, hardware and software selection, calibration, analysis, and more, allowing researchers to avoid the common pitfalls caused by incorrect infrastructure. - Shows, in detail, how valve configurations work, allowing readers to understand the building blocks of extremely complex systems - Presents the complete infrastructure for setting up a gas analysis laboratory in a single source - Includes a full chapter on practical analytical systems for analyzing various gas mixtures
Download or read book Trace Analysis of Specialty and Electronic Gases written by William M. Geiger and published by John Wiley & Sons. This book was released on 2013-07-15 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the latest advances and applications of specialty and electronic gas analysis The semiconductor industry depends upon a broad range of instrumental techniques in order to detect and analyze impurities that may be present in specialty and electronic gases, including permanent gases, water vapor, reaction by-products, and metal species. Trace Analysis of Specialty and Electronic Gases draws together all the latest advances in analytical chemistry, providing researchers with both the theory and the operating principles of the full spectrum of instrumental techniques available for specialty and electronic gas analysis. Moreover, the book details the advantages and disadvantages of each technique, steering readers away from common pitfalls. Featuring contributions from leading analytical and industrial chemists, Trace Analysis of Specialty and Electronic Gases covers a wide range of practical industrial applications. The book begins with the historical development of gas analysis and then focuses on particular subjects or techniques such as: Metals sampling and ICP-MS analysis Improvements in FTIR spectroscopy Water vapor analysis techniques New infrared laser absorption spectroscopy approaches GC/MS, GC/AED, and GC-ICP-MS techniques Gas chromatography columns Atmospheric pressure ionization mass spectrometry Lastly, the book examines gas mixtures and standards that are critical for instrument calibration. There are also two appendices offering information on fittings and material compatibility. With its thorough review of the literature and step-by-step guidance, Trace Analysis of Specialty and Electronic Gases enables researchers to take full advantage of the latest advances in gas analysis. Although the book's focus is the semiconductor and electronics industry, analytical chemists in other industries facing challenges with such issues as detection selectivity and sensitivity, matrix gas interference, and materials compatibility will also discover plenty of useful analytical approaches and techniques.
Download or read book The Discovery of the Rare Gases written by Morris William Travers and published by . This book was released on 1928 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Many Kinds of Matter written by Jennifer Boothroyd and published by Lerner Digital ™. This book was released on 2017-08-01 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Audisee® eBooks with Audio combine professional narration and text highlighting for an engaging read aloud experience! Ice cubes clink in a glass. Steam rises from a pot of boiling water. Solids, liquids, and gases are all around you. But what exactly are solids, liquids, and gases? And how do you tell them apart? Read this book to find out!
Download or read book Teacher s Guide for Gases and airs written by Elementary Science Study (Education Development Center) and published by . This book was released on 1987 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science Rocks written by Robert Winston and published by Penguin. This book was released on 2011-01-17 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science Rocks! is a cross between a science manual offering youngsters a variety of awe-inspiring ideas for projects that could enliven their school work, and a book of suggestions of fun things to do to fill a few spare minutes, an hour, or a day. By making use of everyday objects commonly found around the home, it is instantly accesible to all. Included are some tougher experiments to encourage family participation and group efforts, such as making outrageously large bubbles with dry ice and liquid soap. Meanwhile, the Brainwaves section features tricks and puzzles than can be carried out alone or used to test family and friends-perfect for rainy days or long car trips.
Download or read book Research at the National Physical Laboratory on the Properties of Gases at High Temperature written by K. C. Lapworth and published by . This book was released on 1959 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Compressed Gases written by Compressed Gas Association and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of compressed gases and related equipment, there is an expanding core of essential knowledge that people handling and using these materials should be familiar with or should know where to find when necessary. The focus of this book concerns the properties and the accepted means of trans portation, storage, and handling of compressed gases. This Handbook is simul taneously intended as an overview of the subject and a source of supplementary information. It is also intended to serve as a guide to pertinent federal regulatory requirements and published standards of the Compressed Gas Association and other standards-writing bodies. Readers are advised that the CGA technical pamphlets remain the official state ment of policy by the Association on a particular matter. Reference is made throughout this text to the numerous technical pamphlets published by the Com pressed Gas Association. Some of these publications have been incorporated by reference into federal, state, provincial, and local regulations. Since these pam phlets are reviewed on a periodic basis, wherever the text of this Handbook may be found in conflict with corresponding information in the CGA technical pam phlets, the latter shall take precedence.
Download or read book Gas Phase Chemistry in Space written by Faure Lique and published by . This book was released on 2019-02-26 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Astrochemistry, the study of chemistry in space, is a rapidly growing field in astrophysics. Molecules are found everywhere; from our solar system to high-redshift galaxies. Gas-Phase Chemistry in Space: From elementary particles to complex organic molecules addresses the physics and chemistry of astrophysical molecules with a focus on gas-phase processes. Edited by François Lique and Alexandre Faure, alongside a collection of experts in the field, this book introduces essential concepts that govern the formation, excitation and destruction of molecules at postgraduate and research levels. A broad range of topics are covered, including early universe chemistry and stellar nucleosynthesis, and the study of bimolecular reaction kinetics. Detailed descriptions of the gas-phase process are provided and recent examples of the interplay between observational and laboratory astrophysics are examined. Coinciding with the timely arrival of powerful new telescopes, this work examines numerous advances in astrochemistry and paves the way for these advances to be implemented in the future. More than 100 figures are used, alongside examples, providing both theoretical and experimental perspectives. Book jacket.
Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2011-09-21 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...this substantial and engaging text offers a wealth of practical (in every sense of the word) advice...Every undergraduate laboratory, and, ideally, every undergraduate chemist, should have a copy of what is by some distance the best book I have seen on safety in the undergraduate laboratory." Chemistry World, March 2011 Laboratory Safety for Chemistry Students is uniquely designed to accompany students throughout their four-year undergraduate education and beyond, progressively teaching them the skills and knowledge they need to learn their science and stay safe while working in any lab. This new principles-based approach treats lab safety as a distinct, essential discipline of chemistry, enabling you to instill and sustain a culture of safety among students. As students progress through the text, they’ll learn about laboratory and chemical hazards, about routes of exposure, about ways to manage these hazards, and about handling common laboratory emergencies. Most importantly, they’ll learn that it is very possible to safely use hazardous chemicals in the laboratory by applying safety principles that prevent and minimize exposures. Continuously Reinforces and Builds Safety Knowledge and Safety Culture Each of the book’s eight chapters is organized into three tiers of sections, with a variety of topics suited to beginning, intermediate, and advanced course levels. This enables your students to gather relevant safety information as they advance in their lab work. In some cases, individual topics are presented more than once, progressively building knowledge with new information that’s appropriate at different levels. A Better, Easier Way to Teach and Learn Lab Safety We all know that safety is of the utmost importance; however, instructors continue to struggle with finding ways to incorporate safety into their curricula. Laboratory Safety for Chemistry Students is the ideal solution: Each section can be treated as a pre-lab assignment, enabling you to easily incorporate lab safety into all your lab courses without building in additional teaching time. Sections begin with a preview, a quote, and a brief description of a laboratory incident that illustrates the importance of the topic. References at the end of each section guide your students to the latest print and web resources. Students will also find “Chemical Connections” that illustrate how chemical principles apply to laboratory safety and “Special Topics” that amplify certain sections by exploring additional, relevant safety issues. Visit the companion site at http://userpages.wittenberg.edu/dfinster/LSCS/.
