Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of The Science and Technology of Rubber provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling. · Explores new applications of rubber within the tire industry, from new filler materials to “green tires (a tire that has yet to undergo curing and vulcanization). · 30% of the material has been revised from the previous edition with the addition of 20% new material, including a chapter on the environment. · A mixture of theory, experiments, and practical procedures will offer value to students, practitioners, and research & development departments in industry.
Download or read book The Science and Technology of Rubber written by James E. Mark and published by Academic Press. This book was released on 2005-04 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of The Science and Technology of Rubber provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling. .Explores new applications of rubber within the tire industry, from new filler materials to green tires (a tire that has yet to undergo curing and vulcanization). .30% of the material has been revised from the previous edition with the addition of 20% new material, including a chapter on the environment. .A mixture of theory, experiments, and practical procedures will offer value to students, practitioners, and research & development departments in industry."
Download or read book The Science and Technology of Rubber written by James E. Mark and published by Academic Press. This book was released on 2005-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of The Science and Technology of Rubber provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling. .Explores new applications of rubber within the tire industry, from new filler materials to green tires (a tire that has yet to undergo curing and vulcanization). .30% of the material has been revised from the previous edition with the addition of 20% new material, including a chapter on the environment. .A mixture of theory, experiments, and practical procedures will offer value to students, practitioners, and research & development departments in industry."
Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.
Download or read book Rubber written by Elisabetta Princi and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-05-20 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber materials serve a variety of purposes in our everyday life. This book gives a complete survey of the life cycle of rubber materials starting from the basics and covering everything to recycling of rubber. The important aspects for researchers and engineers in rubber industry such as vulcanization, thermoplastic elastomers, additives and fillers and rubber bonding is covered in one chapter each.
Download or read book Natural Rubber written by M.R. Sethuraj and published by Elsevier. This book was released on 2012-12-02 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: No other book on natural rubber covers such a broad spectrum of subjects as this unique publication. Subjects related to the biology, cultivation and technology of natural rubber are dealt with, along with such important aspects as its history, production and processing, through to its sophisticated engineering applications. Every chapter follows a monograph style of presentation, with comprehensive citations and depth of treatment. Contributions from highly experienced, and still active, renowned scientists reflect the truly international effort to the development of this commodity. In addition to the wealth of information presented, most of the chapters contain elaborate lists of earlier contributions in the respective fields; one chapter each has been included on rubber wood, ancillary products and guayule.
Download or read book Natural Rubber Science and Technology written by A. D. Roberts and published by Oxford University Press, USA. This book was released on 1988 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: A summary of the current position in the study of rubber, its fundamental properties and the uses to which it is put, from everyday to extraordinary applications, with pointers to the future.
Download or read book Developments in Rubber Technology 4 written by K.S. Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, the fourth in a series which began in 1979, covers a greater variety of subjects than any previous single volume. The basis of selection has been topical interest; hence the tailor-making of polymers to develop specific properties, methods of improving com pound processability and the use of rubbers in the oil industry are featured alongside a discussion of safety aspects. We have again sought the cooperation of the foremost authorities on the chosen subjects and have been delighted at the response which has yielded a list of authors of international repute. A. w. K. S. L. CONTENTS Preface v List of Contributors ix 1. Recent Developments in Synthetic Rubbers by Anionic Polymerization 1 I. G. HARGIS, R. A. LIVIGNI and S. L. AGGARWAL 2. Advances in Nitrile Rubber (NBR) 57 P. W. MILNER 3. Epoxidized Natural Rubber. 87 C. S. L. BAKER and I. R. GELLING 4. Process Aids and Plasticizers . 119 B. G. CROWTHER 5. A Review of Elastomers Used for Oilfield Sealing Environments . 159 W. N. K. REVOLTA and G. C. SWEET 6. Using Modern Mill Room Equipment . 193 H. ELLWOOD 7. Quality Requirements and Rubber Mixing . 221 P. S. JOHNSON 8. Health and Safety . . 253 B. G. WILLOUGHBY Index . 307 vii LIST OF CONTRIBUTORS s. L. AGGARWAL Gen Corp , Research Division, 2990 Gilchrist Road, Akron, Ohio 44305, USA C. S. L. BAKER Malaysian Rubber Producers' Research Association, Tun Abdul Razak Laboratory, Brickendonbury, Hertford SG13 8NL, UK B. G.
Download or read book Rubber Compounding written by Brendan Rodgers and published by CRC Press. This book was released on 2015-10-09 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber Compounding: Chemistry and Applications describes the production, processing, and characteristics of a wide range of materials utilized in the modern tire and rubber industry, from natural to butyl rubber, carbon black, silica, silanes, and beyond. Containing contributions from leading specialists in the field, the text investigates the chem
Download or read book Rubber Technology written by John S. Dick and published by . This book was released on 2009 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rubberlike Elasticity written by James E. Mark and published by Cambridge University Press. This book was released on 2007-02-08 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomers and rubberlike materials form a critical component in diverse applications that range from tyres to biomimetics and are used in chemical, biomedical, mechanical and electrical engineering. This updated and expanded edition provides an elementary introduction to the physical and molecular concepts governing elastic behaviour, with a particular focus on elastomers. The coverage of fundamental principles has been greatly extended and fully revised, with analogies to more familiar systems such as gases, producing an engaging approach to these phenomena. Dedicated chapters on novel uses of elastomers, covering bioelastomers, filled elastomers and liquid crystalline elastomers, illustrate the established and emerging applications at the forefront of physical science. With a list of experiments and demonstrations, problem sets and solutions, this is a self-contained introduction to the topic for graduate students, researchers and industrialists working in the applied fields of physics and chemistry, polymer science and engineering.
Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties Explores novel applications of natural rubber across a range of industries, including current and potential uses Discusses resources and utilization, and considers sustainable future development of natural rubber
Download or read book Natural Rubber written by Janet L. Hamilton and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Rubber (NR) is a renewable polymer endowed with remarkable properties including its high elasticity and high film forming capacity, properties that enable its use in a wide range of applications. In this book, Chapter One reviews properties, behavior and uses of NR. Chapter Two discusses NR properties and conventional applications, as well the development of new thermo-reversible cross linked NR. Chapter Three evaluates samples of natural rubber latex using a coaxial cylinder rheometer and, as from the data obtained, propose a model to determine the flow energy at different total solids contents. Chapter Four provides a review of the past, present and future perspectives of the vulcanization of natural rubber. Chapter Five investigates the effect of increasing MMT loading levels on the physico-mechanical properties of EVA/ devulcanized rubber (DVC rubber) blends. Chapter Six discusses in detail the parameters and conditions that could influence the degradation reaction of NR latex in the presence of hydrogen peroxide and UV light. Chapter Seven focuses specifically on the use of metal and metal oxide particles in NR, epoxidized natural rubber (ENR) and their respective blends reported between 2010 to 2015.
Download or read book Developments in Rubber Technology written by A Whelan and published by Springer. This book was released on 2014-01-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Science and Technology written by Premamoy Ghosh and published by . This book was released on 2011 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rubber to Rubber Adhesion written by Dinesh Kumar Kotnees and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: RUBBER TO RUBBER ADHESION Readers will get helpful ideas and in-depth knowledge about various aspects of rubber to rubber adhesion with particular reference to theory and practice. This book covers various aspects of rubber to rubber adhesion which is important theoretically, as well as having practical implications. Rubber is a polymer whose glass transition temperature is well below the room temperature and hence the chains are very mobile at room and higher temperatures, making the material very versatile. Rubber is used in a large number of applications ranging from underground mining to tire to space vehicles. In all these cases, compounded rubbers are used in laminates and joined. The higher the adhesion, the higher will be the joint strength. The principles taught in adhesion science and technology are extensively used to prepare better joints and more useful products. The book serves to satisfy a wide range of disciplines (polymers, materials, chemical, chemistry, mechanical, etc.) and starts with an introduction on rubber, then characterization of rubber, rubber surface and joints and, finally, other chapters on rubber to rubber adhesion. Scientific aspects to understand the technology are highlighted. It gives a comprehensive treatment on adhesion between unvulcanized elastomers, self-healing of elastomers, adhesion between compounded elastomers by co-crosslinking, adhesion between partially vulcanized compounded rubber and partially vulcanized compounded rubber, adhesion between vulcanized rubber and unvulcanized rubber- or partially vulcanized rubber, and adhesion between vulcanized rubber and vulcanized rubber. Audience The book will be used by academicians in polymer science, materials science, chemical and mechanical engineering, chemistry, R & D personnel, industry people, as well as rubber and adhesion practitioners.
Download or read book Latex Dipping written by David M. Hill and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-03-04 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Latex products that we use in everyday life have a great impact on health and lifestyle. This book gives a comprehensive overview of how raw materials are prepared for latex manufacture and how they are converted to products by modern latex dipping methods. Tools for how to solve production problems encountered, quality control and how to validate the processes used in the latex industry are thoroughly discussed and described.
