Download or read book Science and Technology of Polymers and Advanced Materials written by Paras N. Prasad and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the state ofthe art research presented at the Fourth International Conference on Frontiers of Polymersand Advanced Materialsheld in Cairo, Egypt in January 4-9, 1997. This conference follows the successful conferences held in Kuala Lumpur, Malaysia in 1995, in Jakarta, Indonesia in 1993 andin New Delhi, India in 1991. These conferences focussed on the most recent and important advances in a wide range of carefully chosen subject areas dealing with advanced materials, their science and technology and new business opportunities resulting from recent technological advances. As its predecessors, the conference held in Cairo was truly international with strong participation of 488 deiegales representing 37 countries from the USA and Egypt, as weil as Europe, South East Asia, Japan, South Africa and the Middle East. The conference was organized by the Egyptian Academy of Scientific Research and Technology, The Arab Society ofMaterials Science and the State University ofNew Y ork at Butfalo. The stated goals ofthe conference were: • To highlight advances and new. findings in the general area of polymers and advanced materials. - • T o foster global collaboration between the USA, Egypt and other nations in the general field of polymers and advanced materials. • To promote the development of scientific ilifrastructure in this field among the different participating countries, especially in the Middle East. • To create a basisforfuture long-term scientific exchanges between the USA and Egypt, and/or other countries.
Download or read book Science and Technology of Polymers and Advanced Materials written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2019-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing interest in lightweight and high-performance materials is leading to significant research activity in the area of polymers and composites. One recent focus is to develop multifunctional materials that have more than one property tailored as to the specified design requirements, in addition to achieving low density. The possibility of simultaneously tailoring several desired properties is attractive but very challenging, and it requires significant advancement in the science and technology of high-performance functional polymers and composites. This volume presents a selection of new approaches in the field of composites and nanomaterials, polymer synthesis and applications, and materials and their properties. Some composites/nanocomposites and interfaces are explored as well, some with medical applications. The authors also look at simulations and modeling, synthesis involving photochemistry, self-assembled hydrogels, and sol-gel processing.
Download or read book Advanced Materials Polymers and Composites written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2021-11-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews several domains of polymer science, especially new trends in polymerization synthesis, physical-chemical properties, and inorganic systems. Composites and nanocomposites are also covered in this book, emphasizing nanotechnologies and their impact on the enhancement of physical and mechanical properties of these new materials. Kinetics and simulation are discussed and also considered as promising techniques for achieving chemistry and predicting physical property goals. This book presents a selection of interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research.
Download or read book Frontiers of Polymers and Advanced Materials written by Paras N. Prasad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Second International Conference on Frontiers of Polymers and Advanced Materials held in Jakarta, Indonesia during January 10-15, 1993. This conference was organized and sponsored by the Indonesian Institute of Sciences (LIPI), the State University of New York (SUNY) at Buffalo, the Agency for Assessment and Application of Technology (BPPT), and the Indonesian Polymer Association. The 244 participants represented a total of 24 countries and a wide variety of academic, industrial and government groups. The inauguration was held in the Royal Palace and was performed by President Soeharto of Indonesia. High level media coverage ensured worldwide recognition. The need for such a conference was emphasized by the fact that polymers have emerged as an important class of materials offering challenging opportunities for both fundamental research and new technological applications. There has been a tremendous growth of interest in the field of polymers, both in academia and in industry, and polymer science offers tremendous opportunities for both fundamental and applied work. This globally represented Second International Conference on Frontiers of Polymers and Advanced Materials was timely, especially given the current heightened enthusiasm for polymers and emerging novel applications.
Download or read book Polymers and Other Advanced Materials written by Ting Joo Fai and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third International Conference on Frontiers of Polymers and Advanced Materials held in Kuala Lumpur, Malaysia, January 16-20, 1995
Download or read book Science and Technology of Polymers and Advanced Materials written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2019-09-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing interest in lightweight and high-performance materials is leading to significant research activity in the area of polymers and composites. One recent focus is to develop multifunctional materials that have more than one property tailored as to the specified design requirements, in addition to achieving low density. The possibility of simultaneously tailoring several desired properties is attractive but very challenging, and it requires significant advancement in the science and technology of high-performance functional polymers and composites. This volume presents a selection of new approaches in the field of composites and nanomaterials, polymer synthesis and applications, and materials and their properties. Some composites/nanocomposites and interfaces are explored as well, some with medical applications. The authors also look at simulations and modeling, synthesis involving photochemistry, self-assembled hydrogels, and sol-gel processing.
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Materials Science of Polymers written by A. K. Haghi and published by CRC Press. This book was released on 2015-05-27 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical and technological development demands the creation of new materials that are stronger, more reliable, and more durable-materials with new properties. This book skillfully blends and integrates polymer science, plastic technology, and rubber technology to highlight new developments and trends in advanced polyblends. The fundamentals of pol
Download or read book Polymer Science and Innovative Applications written by Mariam Al Ali AlMaadeed and published by Elsevier. This book was released on 2020-05-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Innovative Applications: Materials, Techniques, and Future Developments introduces the science of innovative polymers and composites, their analysis via experimental techniques and simulation, and their utilization in a variety of application areas. This approach helps to unlock the potential of new materials for product design and other uses. The book also examines the role that these applications play in the human world, from pollution and health impacts, to their potential to make a positive contribution in areas including environmental remediation, medicine and healthcare, and renewable energy. Advantages, disadvantages, possibilities, and challenges relating to the utilization of polymers in human society are included. Presents the latest advanced applications of polymers and their composites and identifies key areas for future development Introduces the simulation methods and experimental techniques involved in the modification of polymer properties, supported by clear and detailed images and diagrams Supports an interdisciplinary approach, enabling readers across different fields to harness the power of new materials for innovative applications
Download or read book Advanced Materials written by Theodorus van de Ven and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials gives an unique insight into the specialized materials that are required to run our modern society. Provided within are the fundamental theories and applications of advanced materials for metals, glasses, polymers, composites, and nanomaterials. This book is ideal for scientists and engineers of materials science, chemistry, physics, and engineering, and students of these disciplines.
Download or read book Polymers for Advanced Technologies written by Gennady E. Zaikov and published by CRC Press. This book was released on 2013-03-04 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an abundance of information about the science and application of nanoparticles in the creation of nanocomposite materials, covering the synthesis, properties, and applications of nanomaterials. Written by experts in their fields, the chapters provide important updates on a number of aspects of nanomaterials and their practical applications to create new materials, particularly polymer composite materials. The book is an outgrowth of notes the authors have compiled and used to teach advanced courses on polymers for many years. Useful for engineers and researchers, the book also functions as a highly practical and useful ancillary text for advanced-level students studying nanomaterials and polymer science.
Download or read book Synthesis of Polymers written by Dieter A. Schlüter and published by John Wiley & Sons. This book was released on 2012-05-23 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are huge macromolecules composed of repeating structural units. While polymer in popular usage suggests plastic, the term actually refers to a large class of natural and synthetic materials. Due to the extraordinary range of properties accessible, polymers have come to play an essential and ubiquitous role in everyday life - from plastics and elastomers on the one hand to natural biopolymers such as DNA and proteins on the other hand. The study of polymer science begins with understanding the methods in which these materials are synthesized. Polymer synthesis is a complex procedure and can take place in a variety of ways. This book brings together the "Who is who" of polymer science to give the readers an overview of the large field of polymer synthesis. It is a one-stop reference and a must-have for all Chemists, Polymer Chemists, Chemists in Industry, and Materials Scientists.
Download or read book Advances in Polymer Materials and Technology written by Anandhan Srinivasan and published by CRC Press. This book was released on 2016-08-19 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancements in the field of polymer science and technology. Frontiers areas, such as polymers based on bio-sources, polymer based ferroelectrics, polymer nanocomposites for capacitors, food packaging and electronic packaging, piezoelectric sensors, polymers from renewable resources, superhydrophobic materials and electrospinning are topics of discussion. The contributors to this book are expert researchers from various academic institutes and industries from around the world.
Download or read book Epoxy Polymers written by Jean-Pierre Pascault and published by John Wiley & Sons. This book was released on 2009-12-09 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the only book to focus on new developments and innovations in this hot field international experts from industry and academia present everything scientists need to know. The first section provides general concepts of the synthesis and properties of epoxy polymers and serves as a basis for the subsequent chapters. The second section includes new types of epoxy polymers recently commercialized or not yet present on the market, while the third section includes chapters related to the capacity of generating controlled nanostructures in epoxy-based materials. A fourth section is devoted to innovations in epoxy-based materials such as adhesives, coatings, pre-pregs, structural foams, injection-molded products and self-healing epoxies. Concluding remarks and perspectives are discussed in a short final section. The result is a one-stop reference source, collecting scientific and technological breakthroughs otherwise spread over hundreds of publications, patents and reports.
Download or read book Advanced Materials Innovation written by Sanford L. Moskowitz and published by John Wiley & Sons. This book was released on 2016-09-01 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through detailed case studies of the most important advanced material creations of the latter 20th and early 21st century, the author explores the role of the field of advanced materials in the technological and economic activity today, with implications to the innovation process in general. A comprehensive study that encompasses the three major categories of advanced material technologies, i.e., Structural Materials (metals and polymers), Functional Materials (transistor, microchip and semiconductor laser) and Hybrid and New Forms of Matter (liquid crystals and nanomaterials). Extensive use of primary sources, including unpublished interviews with the scientists, engineers, and entrepreneurs on the front lines of advanced materials creation Original approach to case study narrative, emphasizing interaction between the advanced material process, perceived risk and directing and accelerating breakthrough technology
Download or read book Principles of Polymers written by Dibyendu Sekhar Bag and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written in a concise manner to include all fundamental aspects of polymer science including recent inventions in polymerisation's and polymers. It covers atom transfer radical polymerisation (ATRP), reversible addition-fragmentation chain transfer (RAFT), nitroxide-mediated polymerisation (NMP), click chemistry as well as stereopolymerisation, ring opening metathesis polymerisation (ROMP), group transfer polymerisation (GTP), plasma polymerisation etc. in addition to the usual polymerisation mechanisms such as radical, ionic and step polymerisations. It also includes new developments of polymer science which are considered as hot topics of functional polymers like smart or intelligent polymers, light emitting polymers, conducting polymers, magnetic polymers, optically active and/or chiral polymers, liquid crystalline polymers, self-healing polymers, polymers for biomedical applications, dendrimers and/or dendritic polymers and polymer nanocomposites etc.
Download or read book Advanced Materials Science Technology in China A Roadmap to 2050 written by Ke Lu and published by Springer Science & Business Media. This book was released on 2010-08-09 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced materials science. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China's modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China's S&T roadmaps for the relevant eight basic and strategic systems in line with China's reality, further detail S&T initiatives of strategic importance to China's modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China's reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation's highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government's decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China's high-tech enterprises through its active engagement in these areas.
