Download or read book Science and Technology of Integrated Ferroelectrics written by Carlos Pazde-Araujo and published by CRC Press. This book was released on 2001-01-11 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present in one volume some of the most significant developments that have taken place in the field of integrated ferroelectrics during the last decade of the twentieth century. The book begins with a comprehensive introduction to integrated ferroelectrics and follows with fifty-three papers selected by Carlos Paz de Araujo, Orlando Auciello, Ramamoorthy Ramesh, and George W. Taylor. These fifty-three papers were selected from more than one thousand papers published over the last eleven years in the proceedings of the International Symposia on Integrated Ferroelectrics (ISIF). These papers were chosen on the basis that they (a) give a broad view of the advances that have been made and (b) indicate the future direction of research and technological development. Readers who wish for a more in-depth treatment of the subject are encouraged to refer to volumes 1 to 27 of Integrated Ferroelectrics, the main publication vehicle for papers in this field.
Download or read book Science and Technology of Integrated Ferroelectrics written by Carlos Paz De Araujo and published by . This book was released on 2002 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology of Integrated Ferroelectrics written by Carlos Pazde-Araujo and published by CRC Press. This book was released on 2001-01-11 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present in one volume some of the most significant developments that have taken place in the field of integrated ferroelectrics during the last decade of the twentieth century. The book begins with a comprehensive introduction to integrated ferroelectrics and follows with fifty-three papers selected by Carlos Paz de Arauj
Download or read book Science and Technology of Electroceramic Thin Films written by O. Auciello and published by Springer Science & Business Media. This book was released on 1995-02-28 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroceramic thin films hold out the promise of applications in entirely new generations of advanced microdevices that may revolutionise technology, creating multibillion dollar markets in the process. Less glamorous than the high-temperature superconductors, but probably just as important, are electrically conductive, ferroelectric, piezoelectric, pyroelectric, electro-optic, and magnetic films. The list of potential applications of films having these properties is virtually endless, but there are still some issues to be resolved before fully functioning devices reach the market. All these issues and more are discussed in Science and Technology of Electroceramic Thin Films, which provides one of the best, most up to date summaries of the field currently available.
Download or read book Ferroelectric Thin Films written by Carlos Paz de Araujo and published by Taylor & Francis US. This book was released on 1996 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impetus for the rapid development of thin film technology, relative to that of bulk materials, is its application to a variety of microelectronic products. Many of the characteristics of thin film ferroelectric materials are utilized in the development of these products - namely, their nonvolatile memory and piezoelectric, pyroelectric, and electro-optic properties. It is befitting, therefore, that the first of a set of three complementary books with the general title Integrated Ferroelectric Devices and Technologies focuses on the synthesis of thin film ferroelectric materials and their basic properties. Because it is a basic introduction to the chemistry, materials science, processing, and physics of the materials from which integrated ferroelectrics are made, newcomers to this field as well as veterans will find this book self-contained and invaluable in acquiring the diverse elements requisite to success in their work in this area. It is directed at electronic engineers and physicists as well as process and system engineers, ceramicists, and chemists involved in the research, design, development, manufacturing, and utilization of thin film ferroelectric materials.
Download or read book Thin Film Ferroelectric Materials and Devices written by R. Ramesh and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past five years have witnessed some dramatic developments in the general area of ferroelectric thin films materials and devices. Ferroelectrics are not new materials by any stretch ofimagination. Indeed, they have been known since the early partofthis century and popular ferroelectric materials such as Barium Titanate have been in use since the second world war. In the late sixties and seventies, a considerable amountofresearch and development effort was made to create a solid state nonvolatile memory using ferroelectrics in a vary simple matrix-addressed scheme. These attempts failed primarily due to problems associated with either the materials ordue to device architectures. The early eighties saw the advent of new materials processing approaches, such as sol-gel processing, that enabled researchers to fabricate sub-micron thin films of ferroelectric materials on a silicon substrate. These pioneering developments signaled the onsetofa revival in the areaofferroelectric thin films, especially ferroelectric nonvolatile memories. Research and development effort in ferroelectric materials and devices has now hit a feverish pitch, Many university laboratories, national laboratories and advanced R&D laboratories oflarge IC manufacturers are deeply involved in the pursuit of ferroelectric device technologies. Many companies worldwide are investing considerable manpower and resources into ferroelectric technologies. Some have already announced products ranging from embedded memories in micro controllers, low density stand-alone memories, microwave circuit elements, andrf identification tags. There is now considerable optimism that ferroelectric devices andproducts will occupy a significant market-share in the new millennium.
Download or read book Science and Technology of Interfaces written by Sreeramamurthy Ankem and published by John Wiley & Sons. This book was released on 2013-09-30 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium was organized to capture the state of our knowledge on the science and technology of interfaces. The Symposium (in honor of Dr. B. B. Rath) was held during the TMS Annual meeting, Feb 17-21, 2002 at Seattle WA. This volume captures the salient papers presented at the symposium. The symposium was sponsored by the Structural Materials Division and the Electronic, Magnetic & Photonic Materials Division of TMS and the Materials Science Critical Technology Sector of ASM International and in particular by the following committees: the Physical Metallurgy Committee (TMS), the Superconducting Materials Committee (TMS), the Titanium Committee (TMD) and the Mechanical Behavior of Materials Committee (TMS/ASM). The objective of this symposium was to present current research on advanced interface controlled materials with primary focus on advanced materials. Special attention was given to design of such interface controlled materials with their unique and highly desirable properties. The symposium was designed to assess the current status and to identify future directions of research, design and applications of the role of interfaces in nanostructured bulk solids, films and coatings as well as polycrystalline superconducting materials. Particular emphasis was placed on developing close interactions and fostering future collaborations among scientists and engineers from the USA, Western and Eastern Europe, Russia, and other Asian countries.
Download or read book Frontiers of Thin Film Technology written by and published by Academic Press. This book was released on 2000-11-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers of Thin Film Technology, Volume 28 focuses on recent developments in those technologies that are critical to the successful growth, fabrication, and characterization of newly emerging solid-state thin film device architectures. Volume 28 is a condensed sampler of the Handbook for use by professional scientists, engineers, and students involved in the materials, design, fabrication, diagnostics, and measurement aspects of these important new devices.
Download or read book Ferroelectric Thin Films written by Carlos Paz de Araujo and published by Taylor & Francis. This book was released on 1996 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impetus for the rapid development of thin film technology, relative to that of bulk materials, is its application to a variety of microelectronic products. Many of the characteristics of thin film ferroelectric materials are utilized in the development of these products - namely, their nonvolatile memory and piezoelectric, pyroelectric, and electro-optic properties. It is befitting, therefore, that the first of a set of three complementary books with the general title Integrated Ferroelectric Devices and Technologies focuses on the synthesis of thin film ferroelectric materials and their basic properties. Because it is a basic introduction to the chemistry, materials science, processing, and physics of the materials from which integrated ferroelectrics are made, newcomers to this field as well as veterans will find this book self-contained and invaluable in acquiring the diverse elements requisite to success in their work in this area. It is directed at electronic engineers and physicists as well as process and system engineers, ceramicists, and chemists involved in the research, design, development, manufacturing, and utilization of thin film ferroelectric materials.
Download or read book Ferroelectric Random Access Memories written by Hiroshi Ishiwara and published by Springer Science & Business Media. This book was released on 2004-04-16 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists of 5 parts: (1) ferroelectric thin films, (2) deposition and characterization methods, (3) fabrication process and circuit design, (4) advanced-type memories, and (5) applications and future prospects; each part is further divided into several chapters. Because of the wide range of topics discussed, each chapter in this book was written by one of the best authors knowing the specific topic very well.
Download or read book Explosive Ferroelectric Generators From Physical Principles To Engineering written by Sergey I Shkuratov and published by World Scientific. This book was released on 2019-07-24 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'This book would appeal to those who are interested in pulse power technology and pulse power generation. The fascinating ability to be able to achieve such incredible power levels with such compact devices is astonishing and could open up many new applications using the methods described in this well-written book, that is loaded with a wealth of experimental data, technical background on ferroelectric materials, high explosives, references, and many design ideas for making compact FEG's.'IEEE Electrical Insulation MagazineExplosive Ferroelectric Generators: From Physical Principles to Engineering is an exciting new book that takes the readers inside the world of explosive ferroelectric generators guided by international expert, Dr Sergey I Shkuratov. It acquaints the reader with the principles of operation of ferroelectric generators and provides details on how to design, build and test the devices which are the most developed and the most near-term for practical applications. Containing a considerable amount of experimental data that has been obtained by the author and his team over a period of 20 years, this is the first book that provides key information on theory, performance and applications of ferroelectric generators. It is a fabulous reference for electrical and electronic engineers working with pulsed power systems, researchers, professors, postgraduate, graduate and undergraduate students.
Download or read book Ultrananocrystalline Diamond Coatings for Next Generation High Tech and Medical Devices written by Orlando Auciello and published by Cambridge University Press. This book was released on 2022-07-21 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to ultrananocrystalline-diamond (UNCDTM) and thin film technology for implantable and external medical devices, edited by a pioneer in the field. Covering synthesis and properties, clinical applications, and regulation, it is essential reading for researchers and practitioners in materials science and biomedical engineering.
Download or read book Emerging Non Volatile Memories written by Seungbum Hong and published by Springer. This book was released on 2014-11-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the fundamentals of emerging non-volatile memories and provides an overview of future trends in the field. Readers will find coverage of seven important memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), Multiferroic RAM (MFRAM), Phase-Change Memories (PCM), Oxide-based Resistive RAM (RRAM), Probe Storage, and Polymer Memories. Chapters are structured to reflect diffusions and clashes between different topics. Emerging Non-Volatile Memories is an ideal book for graduate students, faculty, and professionals working in the area of non-volatile memory. This book also: Covers key memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), and Multiferroic RAM (MFRAM), among others. Provides an overview of non-volatile memory fundamentals. Broadens readers’ understanding of future trends in non-volatile memories.
Download or read book 4th International Conference on Nanotechnologies and Biomedical Engineering written by Ion Tiginyanu and published by Springer Nature. This book was released on 2019-09-17 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 4th International Conference on Nanotechnologies and Biomedical Engineering, held on September 18-21, 2019, in Chisinau, Republic of Moldova. It continues the tradition of the previous conference proceedings, thus reporting on both fundamental and applied research at the interface between nanotechnologies and biomedical engineering. Topics include: developments in bio-micro/nanotechnologies and devices; biomedical signal processing; biomedical imaging; biomaterials for biomedical applications; biomimetics; bioinformatics and e-health, and advances in a number of related areas. The book offers a timely snapshot of cutting-edge, multidisciplinary research and developments in the field of biomedical and nano-engineering.
Download or read book Electrical Characterisation of Ferroelectric Field Effect Transistors based on Ferroelectric HfO2 Thin Films written by Ekaterina Yurchuk and published by Logos Verlag Berlin GmbH. This book was released on 2015-06-30 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric field effect transistor (FeFET) memories based on a new type of ferroelectric material (silicon doped hafnium oxide) were studied within the scope of the present work. Utilisation of silicon doped hafnium oxide (Si:HfO2 thin films instead of conventional perovskite ferroelectrics as a functional layer in FeFETs provides compatibility to the CMOS process as well as improved device scalability. The influence of different process parameters on the properties of Si:HfO2 thin films was analysed in order to gain better insight into the occurrence of ferroelectricity in this system. A subsequent examination of the potential of this material as well as its possible limitations with the respect to the application in non-volatile memories followed. The Si:HfO2-based ferroelectric transistors that were fully integrated into the state-of-the-art high-k metal gate CMOS technology were studied in this work for the first time. The memory performance of these devices scaled down to 28 nm gate length was investigated. Special attention was paid to the charge trapping phenomenon shown to significantly affect the device behaviour.
Download or read book Ferroelectric Dielectrics Integrated on Silicon written by Emmanuel Defaÿ and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes up-to-date technology applied to high-K materials for More Than Moore applications, i.e. microsystems applied to microelectronics core technologies. After detailing the basic thermodynamic theory applied to high-K dielectrics thin films including extrinsic effects, this book emphasizes the specificity of thin films. Deposition and patterning technologies are then presented. A whole chapter is dedicated to the major role played in the field by X-Ray Diffraction characterization, and other characterization techniques are also described such as Radio frequency characterization. An in-depth study of the influence of leakage currents is performed together with reliability discussion. Three applicative chapters cover integrated capacitors, variables capacitors and ferroelectric memories. The final chapter deals with a reasonably new research field, multiferroic thin films.
Download or read book Thin Films and Heterostructures for Oxide Electronics written by Satishchandra B. Ogale and published by Springer Science & Business Media. This book was released on 2005-11-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxides form a broad subject area of research and technology development which encompasses different disciplines such as materials science, solid state chemistry, physics etc. The aim of this book is to demonstrate the interplay of these fields and to provide an introduction to the techniques and methodologies involving film growth, characterization and device processing. The literature in this field is thus fairly scattered in different research journals covering one or the other aspect of the specific activity. This situation calls for a book that will consolidate this information and thus enable a beginner as well as an expert to get an overall perspective of the field, its foundations, and its projected progress.
