Download or read book Scheduling Hard Real time Jobs that Allow Imprecise Results written by Jen-Yao Chung and published by . This book was released on 1989 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scheduling Imprecise Hard Real time Jobs with Cumulative Error written by Infan Kuok Cheong and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Scheduling written by Joseph Y-T. Leung and published by CRC Press. This book was released on 2004-04-27 with total page 1215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides full coverage of the most recent and advanced topics in scheduling, assembling researchers from all relevant disciplines to facilitate new insights. Presented in six parts, these experts provides introductory material, complete with tutorials and algorithms, then examine classical scheduling problems. Part 3 explores scheduling models that originate in areas such as computer science, operations research. The following section examines scheduling problems that arise in real-time systems. Part 5 discusses stochastic scheduling and queueing networks, and the final section discusses a range of applications in a variety of areas, from airlines to hospitals.
Download or read book Scheduling Periodic Jobs Using Imprecise Results written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-22 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: One approach to avoid timing faults in hard, real-time systems is to make available intermediate, imprecise results produced by real-time processes. When a result of the desired quality cannot be produced in time, an imprecise result of acceptable quality produced before the deadline can be used. The problem of scheduling periodic jobs to meet deadlines on a system that provides the necessary programming language primitives and run-time support for processes to return imprecise results is discussed. Since the scheduler may choose to terminate a task before it is completed, causing it to produce an acceptable but imprecise result, the amount of processor time assigned to any task in a valid schedule can be less than the amount of time required to complete the task. A meaningful formulation of the scheduling problem must take into account the overall quality of the results. Depending on the different types of undesirable effects caused by errors, jobs are classified as type N or type C. For type N jobs, the effects of errors in results produced in different periods are not cumulative. A reasonable performance measure is the average error over all jobs. Three heuristic algorithms that lead to feasible schedules with small average errors are described. For type C jobs, the undesirable effects of errors produced in different periods are cumulative. Schedulability criteria of type C jobs are discussed. Chung, Jen-Yao and Liu, Jane W. S. and Lin, Kwei-Jay Unspecified Center NASA-CR-183120, NAS 1.26:183120, UIUCDCS-R-87-1307, UILU-ENG-87-1780 N00014-87-K-0827; NAG1-613...
Download or read book Imprecise and Approximate Computation written by Swaminathan Natarajan and published by Springer. This book was released on 2007-08-26 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time systems are now used in a wide variety of applications. Conventionally, they were configured at design to perform a given set of tasks and could not readily adapt to dynamic situations. The concept of imprecise and approximate computation has emerged as a promising approach to providing scheduling flexibility and enhanced dependability in dynamic real-time systems. The concept can be utilized in a wide variety of applications, including signal processing, machine vision, databases, networking, etc. For those who wish to build dynamic real-time systems which must deal safely with resource unavailability while continuing to operate, leading to situations where computations may not be carried through to completion, the techniques of imprecise and approximate computation facilitate the generation of partial results that may enable the system to operate safely and avert catastrophe. Audience: Of special interest to researchers. May be used as a supplementary text in courses on real-time systems.
Download or read book Real Time and Embedded Computing Systems and Applications written by Jing Chen and published by Springer. This book was released on 2004-04-08 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the 37 papers presented at the 9th International Con- rence on Real-Time and Embedded Computing Systems and Applications (RT- CSA 2003). RTCSA is an international conference organized for scientists and researchers from both academia and industry to hold intensive discussions on advancing technologies topics on real-time systems, embedded systems, ubiq- tous/pervasive computing, and related topics. RTCSA 2003 was held at the Department of Electrical Engineering of National Cheng Kung University in Taiwan. Paper submissions were well distributed over the various aspects of real-time computing and embedded system technologies. There were more than 100 participants from all over the world. The papers, including 28 regular papers and 9 short papers are grouped into thecategoriesofscheduling,networkingandcommunication,embeddedsystems, pervasive/ubiquitous computing, systems and architectures, resource mana- ment, ?le systems and databases, performance analysis, and tools and de- lopment. The grouping is basically in accordance with the conference program. Earlier versions of these papers were published in the conference proceedings. However, some papers in this volume have been modi?ed or improved by the authors, in various aspects, based on comments and feedback received at the conference. It is our sincere hope that researchers and developers will bene?t from these papers. We would like to thank all the authors of the papers for their contribution. We thank the members of the program committee and the reviewers for their excellent work in evaluating the submissions. We are also very grateful to all the members of the organizing committees for their help, guidance and support.
Download or read book Imprecise computation Schedulers written by Pilar Manzano and published by . This book was released on 1993 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The periodic-job schedulers are divided in two groups depending on the effect of the error. These groups are the error-cumulative schedulers and the error-non-cumulative schedulers. The periodic-job schedulers have been integrated with two resource-access-control protocols for the management of shared non-preemptable resources and the mode-change- control protocol for task systems working in several modes. The resource- access-control protocols are the priority-ceiling protocol and the stack- based protocol. All the algorithms provided here are part of a performance analysis and execution environment, and can also be used as building blocks for schedulers for other computation models."
Download or read book Scheduling Periodic Jobs Using Imprecise Results written by Jen-Yao Chung and published by . This book was released on 1987 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scheduling in Real time Systems to Ensure Graceful Degradation written by Wei-Kuan Shih and published by . This book was released on 1992 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Prototyping of Application Specific Signal Processors written by Mark A. Richards and published by Springer Science & Business Media. This book was released on 1997-02-28 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Prototyping of Application Specific Signal Processors presents leading-edge research that focuses on design methodology, infrastructure support and scalable architectures developed by the 150 million dollar DARPA United States Department of Defense RASSP Program. The contributions to this edited work include an introductory overview chapter that explains the origin, concepts and status of this effort. The RASSP Program is a multi-year DARPA/Tri-Service initiative intended to dramatically improve the process by which complex digital systems, particularly embedded signal processors, are designed, manufactured, upgraded and supported. This program was originally driven by military applications for signal processing. The requirements of military applications for real-time signal processing are typically more demanding than those of commercial applications, but the time gap between technology employed in advanced military prototypes and commercial products is narrowing rapidly. The research on methodologies, infrastructure and architectures presented in this book is applicable to commercial signal processing systems that are in design now, or will be developed before the end of the decade. Rapid Prototyping of Application Specific Signal Processors is a valuable reference for developers of embedded digital systems, particularly systems engineers for signal processing systems (such as digital TV, biomedical image processing systems and telecommunications) and for military contractors who are developing signal processing systems. This book will also be of interest to managers who are charged with responsibility for creating and maintaining environments and infrastructures for developing large embedded digital systems. The chief value for managers will be the defining of methods and processes that reduce development time and cost.
Download or read book Real Time Database Systems written by Azer Bestavros and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the growing interest in Real-Time Database Systems, there is no single book that acts as a reference to academics, professionals, and practitioners who wish to understand the issues involved in the design and development of RTDBS. Real-Time Database Systems: Issues and Applications fulfills this need. This book presents the spectrum of issues that may arise in various real-time database applications, the available solutions and technologies that may be used to address these issues, and the open problems that need to be tackled in the future. With rapid advances in this area, several concepts have been proposed without a widely accepted consensus on their definitions and implications. To address this need, the first chapter is an introduction to the key RTDBS concepts and definitions, which is followed by a survey of the state of the art in RTDBS research and practice. The remainder of the book consists of four sections: models and paradigms, applications and benchmarks, scheduling and concurrency control, and experimental systems. The chapters in each section are contributed by experts in the respective areas. Real-Time Database Systems: Issues and Applications is primarily intended for practicing engineers and researchers working in the growing area of real-time database systems. For practitioners, the book will provide a much needed bridge for technology transfer and continued education. For researchers, this book will provide a comprehensive reference for well-established results. This book can also be used in a senior or graduate level course on real-time systems, real-time database systems, and database systems or closely related courses.
Download or read book Real Time Systems Architecture Scheduling and Application written by Seyed Morteza Babamir and published by BoD – Books on Demand. This book was released on 2012-04-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a rich text for introducing diverse aspects of real-time systems including architecture, specification and verification, scheduling and real world applications. It is useful for advanced graduate students and researchers in a wide range of disciplines impacted by embedded computing and software. Since the book covers the most recent advances in real-time systems and communications networks, it serves as a vehicle for technology transition within the real-time systems community of systems architects, designers, technologists, and system analysts. Real-time applications are used in daily operations, such as engine and break mechanisms in cars, traffic light and air-traffic control and heart beat and blood pressure monitoring. This book includes 15 chapters arranged in 4 sections, Architecture (chapters 1-4), Specification and Verification (chapters 5-6), Scheduling (chapters 7-9) and Real word applications (chapters 10-15).
Download or read book Real Time Computing written by Alexander D. Stoyenko and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: NATO's Division of Scientific and Environmental Affairs sponsored this Advan ced Study Institute because it was felt to be timely to cover this important and challengjng subject for the first time in the framework of NATO's ASI programme. The significance of real-time systems in everyones' life is rapidly growing. The vast spectrum of these systems can be characterised by just a few examples of increasing complexity: controllers in washing machines, air traffic control systems, control and safety systems of nuclear power plants and, finally, future military systems like the Strategic Defense Initiative (SDI). The import ance of such systems for the well-being of people requires considerable efforts in research and development of highly reliable real-time systems. Furthermore, the competitiveness and prosperity of entire nations now depend on the early app lication and efficient utilisation of computer integrated manufacturing systems (CIM), of which real-time systems are an essential and decisive part. Owing to its key significance in computerised defence systems, real-time computing has also a special importance for the Alliance. The early research and development activities in this field in the 1960s and 1970s aimed towards improving the then unsatisfactory software situation. Thus, the first high-level real-time languages were defined and developed: RTL/2, Coral 66, Procol, LTR, and PEARL. In close connection with these language develop ments and with the utilisation of special purpose process control peripherals, the research on real-time operating systems advanced considerably.
Download or read book Foundations of Real Time Computing Scheduling and Resource Management written by André M. van Tilborg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in real-time scheduling and resource management. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D.C. A companion volume by the title Foundations of Real-Time Computing: Fonnal Specifications and Methods complements this book by addressing many of the most advanced approaches currently being investigated in the arena of formal specification and verification of real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real-time computing systems on a scientific basis. Many of the papers in this book take care to define the notion of real-time system precisely, because it is often easy to misunderstand what is meant by that term. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the very difficult problems of scheduling tasks and resource management in computer systems whose performance is inextricably fused with the achievement of deadlines. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End-use applications of deadline-driven real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.
Download or read book Algorithms Architectures For Parallel Processing 4th Intl Conf written by Andrzej Marian Goscinski and published by World Scientific. This book was released on 2000-11-24 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICA3PP 2000 was an important conference that brought together researchers and practitioners from academia, industry and governments to advance the knowledge of parallel and distributed computing. The proceedings constitute a well-defined set of innovative research papers in two broad areas of parallel and distributed computing: (1) architectures, algorithms and networks; (2) systems and applications.
Download or read book Analytical and Stochastic Modeling Techniques and Applications written by Khalid Al-Begain and published by Springer Science & Business Media. This book was released on 2011-06-14 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Conference on Analytical and Stochastic Modeling Techniques and Applications, ASMTA 2011, held in Venice, Italyin June 2011. The 24 revised full papers presented were carefully reviewed and selected from many submissions.The papers are organized in topical sections on queueing theory, software and computer systems, statistics and inference, telecommunication networks, and performance and performability.
Download or read book Embedded Computing Systems Applications Optimization and Advanced Design written by Khalgui, Mohamed and published by IGI Global. This book was released on 2013-04-30 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded computing systems play an important and complex role in the functionality of electronic devices. With our daily routines becoming more reliant on electronics for personal and professional use, the understanding of these computing systems is crucial. Embedded Computing Systems: Applications, Optimization, and Advanced Design brings together theoretical and technical concepts of intelligent embedded control systems and their use in hardware and software architectures. By highlighting formal modeling, execution models, and optimal implementations, this reference source is essential for experts, researchers, and technical supporters in the industry and academia.
