Download or read book Scheduling Algorithms written by Peter Brucker and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Besides scheduling problems for single and parallel machines and shop scheduling problems, the book covers advanced models involving due-dates, sequence dependent change-over times and batching. A discussion of multiprocessor task scheduling and problems with multi-purpose machines is accompanied by the methods used to solve such problems, such as polynomial algorithms, dynamic programming procedures, branch-and-bound algorithms and local search heuristics, and the whole is rounded off with an analysis of complexity issues.
Download or read book Handbook of Scheduling written by Joseph Y-T. Leung and published by CRC Press. This book was released on 2004-04-27 with total page 1215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides full coverage of the most recent and advanced topics in scheduling, assembling researchers from all relevant disciplines to facilitate new insights. Presented in six parts, these experts provides introductory material, complete with tutorials and algorithms, then examine classical scheduling problems. Part 3 explores scheduling models that originate in areas such as computer science, operations research. The following section examines scheduling problems that arise in real-time systems. Part 5 discusses stochastic scheduling and queueing networks, and the final section discusses a range of applications in a variety of areas, from airlines to hospitals.
Download or read book Hard Real Time Computing Systems written by Giorgio C Buttazzo and published by Springer Science & Business Media. This book was released on 2011-09-10 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition offers an indispensable exposition on real-time computing, with particular emphasis on predictable scheduling algorithms. It introduces the fundamental concepts of real-time computing, demonstrates the most significant results in the field, and provides the essential methodologies for designing predictable computing systems used to support time-critical control applications. Along with an in-depth guide to the available approaches for the implementation and analysis of real-time applications, this revised edition contains a close examination of recent developments in real-time systems, including limited preemptive scheduling, resource reservation techniques, overload handling algorithms, and adaptive scheduling techniques. This volume serves as a fundamental advanced-level textbook. Each chapter provides basic concepts, which are followed by algorithms, illustrated with concrete examples, figures and tables. Exercises and solutions are provided to enhance self-study, making this an excellent reference for those interested in real-time computing for designing and/or developing predictable control applications.
Download or read book Scheduling written by Michael Pinedo and published by . This book was released on 2002 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on theory and applications of scheduling, the applications are drawn primarily from production and manufacturing environments, but state principles that are relevant to other settings as well. The broad range of topics includes deterministic and stochastic models.
Download or read book Scheduling written by Michael L. Pinedo and published by Springer Science & Business Media. This book was released on 2012-01-07 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the well established text Scheduling - Theory, Algorithms, and Systems provides an up-to-date coverage of important theoretical models in the scheduling literature as well as significant scheduling problems that occur in the real world. It again includes supplementary material in the form of slide-shows from industry and movies that show implementations of scheduling systems. The main structure of the book as per previous edition consists of three parts. The first part focuses on deterministic scheduling and the related combinatorial problems. The second part covers probabilistic scheduling models; in this part it is assumed that processing times and other problem data are random and not known in advance. The third part deals with scheduling in practice; it covers heuristics that are popular with practitioners and discusses system design and implementation issues. All three parts of this new edition have been revamped and streamlined. The references have been made completely up-to-date. Theoreticians and practitioners alike will find this book of interest. Graduate students in operations management, operations research, industrial engineering, and computer science will find the book an accessible and invaluable resource. Scheduling - Theory, Algorithms, and Systems will serve as an essential reference for professionals working on scheduling problems in manufacturing, services, and other environments. Reviews of third edition: This well-established text covers both the theory and practice of scheduling. The book begins with motivating examples and the penultimate chapter discusses some commercial scheduling systems and examples of their implementations." (Mathematical Reviews, 2009)
Download or read book Algorithms for Scheduling Problems written by FrankWerner and published by MDPI. This book was released on 2018-08-24 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Algorithms for Scheduling Problems" that was published in Algorithms
Download or read book Multiobjective Scheduling by Genetic Algorithms written by Tapan P. Bagchi and published by Springer Science & Business Media. This book was released on 1999-08-31 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiobjective Scheduling by Genetic Algorithms describes methods for developing multiobjective solutions to common production scheduling equations modeling in the literature as flowshops, job shops and open shops. The methodology is metaheuristic, one inspired by how nature has evolved a multitude of coexisting species of living beings on earth. Multiobjective flowshops, job shops and open shops are each highly relevant models in manufacturing, classroom scheduling or automotive assembly, yet for want of sound methods they have remained almost untouched to date. This text shows how methods such as Elitist Nondominated Sorting Genetic Algorithm (ENGA) can find a bevy of Pareto optimal solutions for them. Also it accents the value of hybridizing Gas with both solution-generating and solution-improvement methods. It envisions fundamental research into such methods, greatly strengthening the growing reach of metaheuristic methods. This book is therefore intended for students of industrial engineering, operations research, operations management and computer science, as well as practitioners. It may also assist in the development of efficient shop management software tools for schedulers and production planners who face multiple planning and operating objectives as a matter of course.
Download or read book A Book of Open Shop Scheduling written by Wieslaw Kubiak and published by Springer Nature. This book was released on 2022-01-03 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth presentation of algorithms for and complexity of open shop scheduling. Open shops allow operations of a job to be executed in any order, contrary to flow and job shops where the order is pre-specified. The author brings the field up to date with more emphasis on new and recent results, and connections with graph edge coloring and mathematical programming. The book explores applications to production and operations management, wireless network scheduling, and timetabling. The book is addressed to researchers, graduate students, and practitioners in Operations Research, Operations Management, computer science and mathematics, who are developing and using mathematical approaches to applications in manufacturing, services and distributed wireless network scheduling.
Download or read book Deadline Scheduling for Real Time Systems written by John A. Stankovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many real-time systems rely on static scheduling algorithms. This includes cyclic scheduling, rate monotonic scheduling and fixed schedules created by off-line scheduling techniques such as dynamic programming, heuristic search, and simulated annealing. However, for many real-time systems, static scheduling algorithms are quite restrictive and inflexible. For example, highly automated agile manufacturing, command, control and communications, and distributed real-time multimedia applications all operate over long lifetimes and in highly non-deterministic environments. Dynamic real-time scheduling algorithms are more appropriate for these systems and are used in such systems. Many of these algorithms are based on earliest deadline first (EDF) policies. There exists a wealth of literature on EDF-based scheduling with many extensions to deal with sophisticated issues such as precedence constraints, resource requirements, system overload, multi-processors, and distributed systems. Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms aims at collecting a significant body of knowledge on EDF scheduling for real-time systems, but it does not try to be all-inclusive (the literature is too extensive). The book primarily presents the algorithms and associated analysis, but guidelines, rules, and implementation considerations are also discussed, especially for the more complicated situations where mathematical analysis is difficult. In general, it is very difficult to codify and taxonomize scheduling knowledge because there are many performance metrics, task characteristics, and system configurations. Also, adding to the complexity is the fact that a variety of algorithms have been designed for different combinations of these considerations. In spite of the recent advances there are still gaps in the solution space and there is a need to integrate the available solutions. For example, a list of issues to consider includes: preemptive versus non-preemptive tasks, uni-processors versus multi-processors, using EDF at dispatch time versus EDF-based planning, precedence constraints among tasks, resource constraints, periodic versus aperiodic versus sporadic tasks, scheduling during overload, fault tolerance requirements, and providing guarantees and levels of guarantees (meeting quality of service requirements). Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms should be of interest to researchers, real-time system designers, and instructors and students, either as a focussed course on deadline-based scheduling for real-time systems, or, more likely, as part of a more general course on real-time computing. The book serves as an invaluable reference in this fast-moving field.
Download or read book Exact and Heuristic Scheduling Algorithms written by Frank Werner and published by MDPI. This book was released on 2020-03-18 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book presents new results in the area of the development of exact and heuristic scheduling algorithms. It contains eight articles accepted for publication for a Special Issue in the journal Algorithms. The book presents new algorithms, e.g., for flow shop, job shop, and parallel machine scheduling problems. The particular articles address subjects such as a heuristic for the routing and scheduling problem with time windows, applied to the automotive industry in Mexico, a heuristic for the blocking job shop problem with tardiness minimization based on new neighborhood structures, fast heuristics for the Euclidean traveling salesman problem or a new mathematical model for the period-aggregated resource leveling problem with variable job duration, and several others.
Download or read book Flow Shop Scheduling written by Hamilton Emmons and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using simplified notation and revealing unifying concepts, this book covers flow shop systems including two-machine, flexible and stochastic, and examines the reentrant flow shop, in which a job may be reprocessed at the same station or sequence of stations.
Download or read book Just in Time Scheduling written by Joanna Jozefowska and published by Springer Science & Business Media. This book was released on 2007-07-19 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: As supply chain management has matured, maintaining the precise flow of goods to manage schedules (and minimize inventories) on a just-in-time basis still presents major challenges. This has inspired an array of models and algorithms to help ensure the precise flow of components and final products into inventories to meet just-in-time requirements. This is the first survey of the theoretical work on computer systems models and algorithms utilized in just-in-time scheduling.
Download or read book Multiagent Scheduling written by Alessandro Agnetis and published by Springer Science & Business Media. This book was released on 2014-01-31 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scheduling theory has received a growing interest since its origins in the second half of the 20th century. Developed initially for the study of scheduling problems with a single objective, the theory has been recently extended to problems involving multiple criteria. However, this extension has still left a gap between the classical multi-criteria approaches and some real-life problems in which not all jobs contribute to the evaluation of each criterion. In this book, we close this gap by presenting and developing multi-agent scheduling models in which subsets of jobs sharing the same resources are evaluated by different criteria. Several scenarios are introduced, depending on the definition and the intersection structure of the job subsets. Complexity results, approximation schemes, heuristics and exact algorithms are discussed for single-machine and parallel-machine scheduling environments. Definitions and algorithms are illustrated with the help of examples and figures.
Download or read book Multicriteria Scheduling written by Vincent T'Kindt and published by Springer Science & Business Media. This book was released on 2006-03-20 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scheduling and multicriteria optimisation theory have been subject, separately, to numerous studies. Since the last twenty years, multicriteria scheduling problems have been subject to a growing interest. However, a gap between multicriteria scheduling approaches and multicriteria optimisation field exits. This book is an attempt to collect the elementary of multicriteria optimisation theory and the basic models and algorithms of multicriteria scheduling. It is composed of numerous illustrations, algorithms and examples which may help the reader in understanding the presented concepts. This book covers general concepts such as Pareto optimality, complexity theory, and general method for multicriteria optimisation, as well as dedicated scheduling problems and algorithms: just-in-time scheduling, flexibility and robustness, single machine problems, parallel machine problems, shop problems, etc. The second edition contains revisions and new material.
Download or read book Project Scheduling written by Jan Weglarz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project scheduling problems are, generally speaking, the problems of allocating scarce resources over time to perform a given set of activities. The resources are nothing other than the arbitrary means which activities complete for. Also the activities can have a variety of interpretations. Thus, project scheduling problems appear in a large spectrum of real-world situations, and, in consequence, they have been intensively studied for almost fourty years. Almost a decade has passed since the multi-author monograph: R. Slowinski, 1. W~glarz (eds. ), Advances in Project Scheduling, Elsevier, 1989, summarizing the state-of-the-art across project scheduling problems, was published. Since then, considerable progress has been made in all directions of modelling and finding solutions to these problems. Thus, the proposal by Professor Frederick S. Hillier to edit a handbook which reports on the recent advances in the field came at an exceptionally good time and motivated me to accept the challenge. Fortunately, almost all leading experts in the field have accepted my invitation and presented their completely new advances often combined with expository surveys. Thanks to them, the handbook stands a good chance of becoming a key reference point on the current state-of-the-art in project scheduling, as well as on new directions in the area. The contents are divided into four parts. The first one, dealing with classical models -exact algorithms, is preceded by a proposition of the classification scheme for scheduling problems.
Download or read book Complex Scheduling written by Peter Brucker and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents models and algorithms for complex scheduling problems. Besides resource-constrained project scheduling problems with applications also job-shop problems with flexible machines, transportation or limited buffers are discussed. Discrete optimization methods like linear and integer programming, constraint propagation techniques, shortest path and network flow algorithms, branch-and-bound methods, local search and genetic algorithms, and dynamic programming are presented. They are used in exact or heuristic procedures to solve the introduced complex scheduling problems. Furthermore, methods for calculating lower bounds are described. Most algorithms are formulated in detail and illustrated with examples. In this second edition some errors were corrected, some parts were explained in more detail, and new material has been added. In particular, further generalizations of the RCPSP, additional practical applications and some more algorithms were integrated.
Download or read book Integration of Process Planning and Scheduling written by Rakesh Kumar Phanden and published by CRC Press. This book was released on 2019-10-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both process planning and scheduling are very important functions of manufacturing, which affect together the cost to manufacture a product and the time to deliver it. This book contains various approaches proposed by researchers to integrate the process planning and scheduling functions of manufacturing under varying configurations of shops. It is useful for both beginners and advanced researchers to understand and formulate the Integration Process Planning and Scheduling (IPPS) problem effectively. Features Covers the basics of both process planning and scheduling Presents nonlinear approaches, closed-loop approaches, as well as distributed approaches Discuss the outfit of IPPS in Industry 4.0 paradigm Includes the benchmarking problems on IPPS Contains nature-algorithms and metaheuristics for performance measurements in IPPS Presents analysis of energy-efficient objective for sustainable manufacturing in IPPS
