Download or read book Scanning Probe Microscopy written by Bert Voigtländer and published by Springer. This book was released on 2015-02-24 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the operating principles of atomic force microscopy and scanning tunneling microscopy. The aim of this book is to enable the reader to operate a scanning probe microscope successfully and understand the data obtained with the microscope. The chapters on the scanning probe techniques are complemented by the chapters on fundamentals and important technical aspects. This textbook is primarily aimed at graduate students from physics, materials science, chemistry, nanoscience and engineering, as well as researchers new to the field.

Download or read book Scanning Probe Microscopy written by Sergei V. Kalinin and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will be devoted to the technical aspects of electrical and electromechanical SPM probes and SPM imaging on the limits of resolution, thus providing technical introduction into the field. This volume will also address the fundamental physical phenomena underpinning the imaging mechanism of SPMs.

Download or read book Roadmap of Scanning Probe Microscopy written by Seizo Morita and published by Springer Science & Business Media. This book was released on 2006-12-30 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning tunneling microscopy has achieved remarkable progress and become the key technology for surface science. This book predicts the future development for all of scanning probe microscopy (SPM). Such forecasts may help to determine the course ultimately taken and may accelerate research and development on nanotechnology and nanoscience, as well as all in SPM-related fields in the future.

Download or read book Scanning Probe Microscopy and Spectroscopy written by Roland Wiesendanger and published by Cambridge University Press. This book was released on 1994-09-29 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation and manipulation of matter on the atomic scale have been revolutionised by scanning tunnelling microscopy and related scanning probe techniques. This book is the first to provide a clear and comprehensive introduction to this subject. Beginning with the theoretical background of scanning tunnelling microscopy, the design and instrumentation of practical STM and associated systems are described in detail, as are the applications of these techniques in fields such as condensed matter physics, chemistry, biology, and nanotechnology. Containing 350 illustrations, and over 1200 references, this unique book represents an ideal introduction to the subject for final-year undergraduates in physics or materials science. It will also be invaluable to graduate students and researchers in any branch of science where scanning probe techniques are used.

Download or read book Scanning Probe Microscopes written by K. S. Birdi and published by CRC Press. This book was released on 2003-02-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Probe Microscopes: Applications in Science and Technology explains, analyzes, and demonstrates the most widely used microscope in the family of microscopes -- the scanning probe microscope. Beginning with an introduction to the development of SPMs, the author introduces the basics of scanning tunneling and atomic force microscopes (STMs an

Download or read book Exploring Scanning Probe Microscopy with MATHEMATICA written by Dror Sarid and published by John Wiley & Sons. This book was released on 2007-02-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new and completely updated edition features not only an accompanying CD-ROM, but also a new applications section, reflecting the many breakthroughs in the field over the last few years. It provides a complete set of computational models that describe the physical phenomena associated with scanning tunneling microscopy, atomic force microscopy, and related technologies. The result is both a solid professional reference and an advanced-level text, beginning with the basics and moving on to the latest techniques, experiments, and theory. In the section devoted to atomic force microscopy, the author describes the mechanical properties of cantilevers, atomic force microscope tip-sample interactions, and cantilever vibration characteristics. This is followed by an in-depth treatment of theoretical and practical aspects of tunneling phenomena, including metal-insulator-metal tunneling and Fowler-Nordheim field emission. The final section features applications, dealing with, among others, Kelvin and Raman probe microscopy. The self-contained presentation spares researchers valuable time spent hunting through the technical literature for the theoretical results required to understand the models presented. The Mathematica code for all the examples is included in the CD-ROM, affording the freedom to change the values and parameters of specific problems as desired, or even modify the programs themselves to suit various modeling needs.

Download or read book Scanning Probe Microscopy written by Ernst Meyer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by three leading experts in the field, this textbook describes and explains all aspects of the scanning probe microscopy. Emphasis is placed on the experimental design and procedures required to optimize the performance of the various methods. Scanning Probe Microscopy covers not only the physical principles behind scanning probe microscopy but also questions of instrumental designs, basic features of the different imaging modes, and recurring artifacts. The intention is to provide a general textbook for all types of classes that address scanning probe microscopy. Third year undergraduates and beyond should be able to use it for self-study or as textbook to accompany a course on probe microscopy. Furthermore, it will be valuable as reference book in any scanning probe microscopy laboratory. Novel applications and the latest important results are also presented, and the book closes with a look at the future prospects of scanning probe microscopy, also discussing related techniques in nanoscience. Ideally suited as an introduction for graduate students, the book will also serve as a valuable reference for practising researchers developing and using scanning probe techniques.

Download or read book Acoustic Scanning Probe Microscopy written by Francesco Marinello and published by Springer Science & Business Media. This book was released on 2012-10-04 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of atomic force microscopy with ultrasonic methods allows the nearfield detection of acoustic signals. The nondestructive characterization and nanoscale quantitative mapping of surface adhesion and stiffness or friction is possible. The aim of this book is to provide a comprehensive review of different scanning probe acoustic techniques, including AFAM, UAFM, SNFUH, UFM, SMM and torsional tapping modes. Basic theoretical explanations are given to understand not only the probe dynamics but also the dynamics of tip surface contacts. Calibration and enhancement are discussed to better define the performance of the techniques, which are also compared with other classical techniques such as nanoindentation or surface acoustic wave. Different application fields are described, including biological surfaces, polymers and thin films.

Download or read book Scanning Probe Microscopy in Industrial Applications written by Dalia G. Yablon and published by John Wiley & Sons. This book was released on 2013-10-24 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes new state-of-the-science tools and their contribution to industrial R&D With contributions from leading international experts in the field, this book explains how scanning probe microscopy is used in industry, resulting in improved product formulation, enhanced processes, better quality control and assurance, and new business opportunities. Readers will learn about the use of scanning probe microscopy to support R&D efforts in the semiconductor, chemical, personal care product, biomaterial, pharmaceutical, and food science industries, among others. Scanning Probe Microscopy in Industrial Applications emphasizes nanomechanical characterization using scanning probe microscopy. The first half of the book is dedicated to a general overview of nanomechanical characterization methods, offering a complete practical tutorial for readers who are new to the topic. Several chapters include worked examples of useful calculations such as using Hertz mechanics with and without adhesion to model a contact, step-by-step instructions for simulations to guide cantilever selection for an experiment, and data analysis procedures for dynamic contact experiments. The second half of the book describes applications of nanomechanical characterization in industry, including: New formulation development for pharmaceuticals Measurement of critical dimensions and thin dielectric films in the semiconductor industry Effect of humidity and temperature on biomaterials Characterization of polymer blends to guide product formulation in the chemicals sector Unraveling links between food structure and function in the food industry Contributions are based on the authors' thorough review of the current literature as well as their own firsthand experience applying scanning probe microscopy to solve industrial R&D problems. By explaining the fundamentals before advancing to applications, Scanning Probe Microscopy in Industrial Applications offers a complete treatise that is accessible to both novices and professionals. All readers will discover how to apply scanning probe microscopy to build and enhance their R&D efforts.

Download or read book Procedures in Scanning Probe Microscopies written by Richard J. Colton and published by . This book was released on 1998-08-21 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Procedures in Scanning Probe Microscopies Edited by R J Colton, Naval Research Laboratory, Washington DC, USA A Engel, Biocenter, Basel University, Switzerland J Frommer, IBM Almaden Research Center, San Jose, CA, USA H E Gaub, Technical University, Munich, Germany A A Gewirth, University of Illinois, Urbana, IL, USA R Guckenberger, Max-Planck-Institute for Biochemistry, Martinsried, Germany W Heckl, Ludwig Maximillians University, Munich, Germany B Parkinson, Colorado State University, Fort Collins, CO, USA J Rabe, Humboldt University, Berlin, Germany Scanning Probe Microscopies (SPM) are revolutionising scientific discovery in diverse disciplines including organic, inorganic and physical chemistry, polymer and materials science, biological and medical systems, electrochemistry and nanotechnology. In this collection of protocols, Procedures in Scanning Probe Microscopies will enable you to: * Build confidence in using SPM * Maximise the potential of your SPM instrumentation * Extend your skill levels The only applications-orientated guide, Procedures in Scanning Probe Microscopies covers scanning tunnelling microscopy, atomic force microscopy and electrochemical methods.

Download or read book Applied Scanning Probe Methods II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-06-22 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ningTunnelingMicroscopysignaled a new era in imaging. The sc- ning probes emerged as a new - strument for imaging with a p- cision suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the M- netic Force Microscope, MFM, and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.

Download or read book Atomic Force Microscopy Scanning Tunneling Microscopy written by M.T. Bray and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first U. S. Army Natick Research, Development and Engineering Center Atomic Force/Scanning Tunneling Microscopy (AFM/STM) Symposium was held on lune 8-10, 1993 in Natick, Massachusetts. This book represents the compilation of the papers presented at the meeting. The purpose ofthis symposium was to provide a forum where scientists from a number of diverse fields could interact with one another and exchange ideas. The various topics inc1uded application of AFM/STM in material sciences, polymers, physics, biology and biotechnology, along with recent developments inc1uding new probe microscopies and frontiers in this exciting area. The meeting's format was designed to encourage communication between members of the general scientific community and those individuals who are at the cutting edge of AFM, STM and other probe microscopies. It immediately became clear that this conference enabled interdisciplinary interactions among researchers from academia, industry and government, and set the tone for future collaborations. Expert scientists from diverse scientific areas including physics, chemistry, biology, materials science and electronics were invited to participate in the symposium. The agenda of the meeting was divided into three major sessions. In the first session, Biological Nanostructure, topics ranged from AFM ofDNA to STM imagmg ofthe biomoleeule tubulin and bacterialluciferase to the AFM of starch polymer double helices to AFM imaging of food surfaces.

Download or read book Bringing Scanning Probe Microscopy up to Speed written by Stephen C. Minne and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing Scanning Probe Microscopy Up to Speed introduces the principles of scanning probe systems with particular emphasis on techniques for increasing speed. The authors include useful information on the characteristics and limitations of current state-of-the-art machines as well as the properties of the systems that will follow in the future. The basic approach is two-fold. First, fast scanning systems for single probes are treated and, second, systems with multiple probes operating in parallel are presented. The key components of the SPM are the mechanical microcantilever with integrated tip and the systems used to measure its deflection. In essence, the entire apparatus is devoted to moving the tip over a surface with a well-controlled force. The mechanical response of the actuator that governs the force is of the utmost importance since it determines the scanning speed. The mechanical response relates directly to the size of the actuator; smaller is faster. Traditional scanning probe microscopes rely on piezoelectric tubes of centimeter size to move the probe. In future scanning probe systems, the large actuators will be replaced with cantilevers where the actuators are integrated on the beam. These will be combined in arrays of multiple cantilevers with MEMS as the key technology for the fabrication process.

Download or read book Scanning Probe Microscopy and Spectroscopy written by Dawn Bonnell and published by John Wiley & Sons. This book was released on 2000-12-05 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to basic theory and contemporary applications across a wide range of research disciplines Over the past two decades, scanning probe microscopies and spectroscopies have gained acceptance as indispensable characterization tools for an array of disciplines. This book provides novices and experienced researchers with a highly accessible treatment of basic theory, alongside detailed examples of current applications of both scanning tunneling and force microscopies and spectroscopies. Like its popular predecessor, Scanning Probe Microscopy and Spectroscopy, Second Edition features contributions from distinguished scientists working in a wide range of specialties at university, commercial, and government research labs around the world. Chapters have been edited for clarity, conciseness, and uniformity of presentation to provide professionals with a concise working reference to scanning probe microscopic and spectroscopic principles, techniques, and practices. This Second Edition has been substantially revised and expanded to reflect important advances and new applications. In addition to numerous examples, the Second Edition features expanded coverage of electrostatic and magnetic force microscopies, near-field optical microscopies, and new applications of buried interfaces in nanomechanics, electrochemistry, and biology. Scanning Probe Microscopy and Spectroscopy, Second Edition is an indispensable working resource for surface scientists, microscopists, and spectroscopists in materials science, chemistry, engineering, biochemistry, physics, and the life sciences. It is also an unparalleled reference text for advanced undergraduates and graduate students in those fields.

Download or read book Design Modeling and Control of Nanopositioning Systems written by Andrew J. Fleming and published by Springer. This book was released on 2014-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the complete design cycle of nanopositioning systems, this is the first comprehensive text on the topic. The book first introduces concepts associated with nanopositioning stages and outlines their application in such tasks as scanning probe microscopy, nanofabrication, data storage, cell surgery and precision optics. Piezoelectric transducers, employed ubiquitously in nanopositioning applications are then discussed in detail including practical considerations and constraints on transducer response. The reader is then given an overview of the types of nanopositioner before the text turns to the in-depth coverage of mechanical design including flexures, materials, manufacturing techniques, and electronics. This process is illustrated by the example of a high-speed serial-kinematic nanopositioner. Position sensors are then catalogued and described and the text then focuses on control. Several forms of control are treated: shunt control, feedback control, force feedback control and feedforward control (including an appreciation of iterative learning control). Performance issues are given importance as are problems limiting that performance such as hysteresis and noise which arise in the treatment of control and are then given chapter-length attention in their own right. The reader also learns about cost functions and other issues involved in command shaping, charge drives and electrical considerations. All concepts are demonstrated experimentally including by direct application to atomic force microscope imaging. Design, Modeling and Control of Nanopositioning Systems will be of interest to researchers in mechatronics generally and in control applied to atomic force microscopy and other nanopositioning applications. Microscope developers and mechanical designers of nanopositioning devices will find the text essential reading.

Download or read book Scanning Probe Microscopy in Nanoscience and Nanotechnology 2 written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-12-17 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical and technical foundation of the state of the art in applied scanning probe techniques. It constitutes a timely and comprehensive overview of SPM applications. The chapters in this volume relate to scanning probe microscopy techniques, characterization of various materials and structures and typical industrial applications, including topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. The chapters are written by leading researchers and application scientists from all over the world and from various industries to provide a broader perspective.

Download or read book Scanning Tunneling Microscopy and Its Application written by Chunli Bai and published by Springer Science & Business Media. This book was released on 2000-08-10 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified view of the rapidly growing field of scanning tunneling microscopy and its many derivatives. After examining novel scanning-probe techniques and the instrumentation and methods, the book provides detailed accounts of STM applications. It examines limitations of the present-day investigations and provides insight into further trends. "I strongly recommend that Professor Bai's book be a part of any library that serves surface scientists, biochemists, biophysicists, material scientists, and students of any science or engineering field...There is no doubt that this is one of the better (most thoughtful) texts." Journal of the American Chemical Society (Review of 1/e)