Download or read book Scalable and Efficient Middleware for Real time Embedded Systems written by Florentin Picioroaga and published by . This book was released on 2004 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The task to design and implement a middleware for embedded real-time systems has, near the normal challenges for building a usual middleware, two additional difficult demands: 1) it must maintain the real-time features of the underlying environment and, 2) it must adapt in the same time to powerful systems and, moreover, fit on small systems (embedded systems). This thesis presents the research done in providing a solution for these problems - OSA+ middleware. The proposed solution is using a well known concept from operating systems - the microkernel architecture. Adapting this concept to a middleware brings a serie of advantages and disadvatages which are analyzed in this thesis.

Download or read book On Building a Scalable Real Time Fault Tolerant System for Embedded Applications written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time embedded systems have evolved during the past several decades from small custom-designed digital hardware to large distributed processing systems. As these systems become more complex, their interoperability, evolvability and cost-effectiveness requirements motivate the use of the commercial-off-the-shelf components. This raises the challenge of constructing dependable and predictable real-time services for application developers on top of the inexpensive hardware and software components which has minimal support for timeliness and dependability guarantees. We are addressing this challenge in the ARMADA project. ARMADA is a set of communication and middleware services that provide support for fault-tolerance and end-to-end guarantees for embedded real-time distributed applications. Since real-time performance of such applications depends heavily on the communication subsystem, the first thrust of the project is to develop a predictable communication service and architecture to ensure QoS-sensitive message delivery. In its second thrust, ARMADA aims to offload the complexity of developing fault-tolerance applications from the application programmer by focusing on a collection of modular, composable middleware for fault-tolerance group communication and replication under timing constraints. Finally, we develop tools for testing and validating the behavior of our services.

Download or read book Adaptive Middleware for the Internet of Things written by Marcus Handte and published by CRC Press. This book was released on 2022-09-01 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past years, a considerable amount of effort has been devoted, both in industry and academia, towards the development of basic technology as well as innovative applications for the Internet of Things. Adaptive Middleware for the Internet of Things introduces a scalable, interoperable and privacy-preserving approach to realize IoT applications and discusses abstractions and mechanisms at the middleware level that simplify the realization of services that can adapt autonomously to the behavior of their users. Technical topics discussed in the book include:Behavior-driven Autonomous ServicesGAMBAS Middleware ArchitectureGeneric and Efficient Data AcquisitionInteroperable and Scalable Data ProcessingAutomated Privacy PreservationAdaptive Middleware for the Internet of Things summarizes the results of the GAMBAS research project funded by the European Commission under Framework Programme 7. It provides an in-depth description of the middleware system developed by the project consortium. In addition, the book describes several innovative mobility and monitoring applications that have been built, deployed and operated to evaluate the middleware under realistic conditions with a large number of users. Adaptive Middleware for the Internet of Things is ideal for personnel in the computer and communication industries as well as academic staff and research students in computer science interested in the development of systems and applications for the Internet of Things.

Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Stamatis Vassiliadis and published by Springer Science & Business Media. This book was released on 2006-07-06 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Workshop on Systems, Architectures, Modeling, and Simulation, SAMOS 2006, held in Samos, Greece on July 2006. The 47 revised full papers presented together with 2 keynote talks were thoroughly reviewed and selected from 130 submissions. The papers are organized in topical sections on system design and modeling, wireless sensor networks, processor design, dependable computing, architectures and implementations, and embedded sensor systems.

Download or read book Demystifying Embedded Systems Middleware written by Tammy Noergaard and published by Elsevier. This book was released on 2010-11-04 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical technical guide to embedded middleware implementation offers a coherent framework that guides readers through all the key concepts necessary to gain an understanding of this broad topic. Big picture theoretical discussion is integrated with down-to-earth advice on successful real-world use via step-by-step examples of each type of middleware implementation. Technically detailed case studies bring it all together, by providing insight into typical engineering situations readers are likely to encounter. Expert author Tammy Noergaard keeps explanations as simple and readable as possible, eschewing jargon and carefully defining acronyms. The start of each chapter includes a "setting the stage" section, so readers can take a step back and understand the context and applications of the information being provided. Core middleware, such as networking protocols, file systems, virtual machines, and databases; more complex middleware that builds upon generic pieces, such as MOM, ORB, and RPC; and integrated middleware software packages, such as embedded JVMs, .NET, and CORBA packages are all demystified. Embedded middleware theory and practice that will get your knowledge and skills up to speed Covers standards, networking, file systems, virtual machines, and more Get hands-on programming experience by starting with the downloadable open source code examples from book website

Download or read book Software Technologies for Embedded and Ubiquitous Systems written by Tony Givargis and published by Springer. This book was released on 2008-09-25 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded and ubiquitous computing systems have considerably increased their scope of application over the past few years, and they now also include missi- and business-critical scenarios. The advances call for a variety of compelling - sues, including dependability, real-time, quality-of-service, autonomy, resource constraints, seamless interaction, middleware support, modeling, veri?cation, validation, etc. The International Workshop on Software Technologies for Future Embedded and Ubiquitous Systems (SEUS) brings together experts in the ?eld of emb- ded and ubiquitous computing systems with the aim of exchanging ideas and advancing the state of the art about the above-mentioned issues. I was honored to chair the sixth edition of the workshop, which continued the tradition of past editions with high-quality research results. I was particularly pleased to host the workshop in the wonderful scenario of Capri, with its stunning views and traditions. The workshop started in 2003 as an IEEE event, and then in 2007 it became a ?agship event of the IFIP Working Group 10.2 on embedded systems. The last few editions, held in Hakodate (Japan), Vienna (Austria), Seattle (USA), Gyeongju (Korea), and Santorini (Greece), were co-located with the IEEE - ternationalSymposiumonObject/Component/Service-OrientedReal-TimeD- tributed Computing (ISORC). This year, SEUS was held as a stand-alone event for the ?rst time, and, - spite the additionalorganizationaldi?culties, it resultedina high-qualityevent, with papers from four continents (from USA, Europe, East Asia and Australia), (co-) authored and presented from senior scientists coming from academia or leading industrial research centers.

Download or read book Cooperating Embedded Systems and Wireless Sensor Networks written by Michel Banatre and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: A number of different system concepts have become apparent in the broader context of embedded systems over the past few years. Whilst there are some differences between these, this book argues that in fact there is much they share in common, particularly the important notions of control, heterogenity, wireless communication, dynamics/ad hoc nature and cost. The first part of the book covers cooperating object applications and the currently available application scenarios, such as control and automation, healthcare, and security and surveillance. The second part discusses paradigms for algorithms and interactions. The third part covers various types of vertical system functions, including data aggregation, resource management and time synchronization. The fourth part outlines system architecture and programming models, outlining all currently available architectural models and middleware approaches that can be used to abstract the complexity of cooperating object technology. Finally, the book concludes with a discussion of the trends guiding current research and gives suggestions as to possible future developments and how various shortcomings in the technology can be overcome.

Download or read book Handbook of Real Time and Embedded Systems written by Insup Lee and published by CRC Press. This book was released on 2007-07-23 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time and embedded systems are essential to our lives, from controlling car engines and regulating traffic lights to monitoring plane takeoffs and landings to providing up-to-the-minute stock quotes. Bringing together researchers from both academia and industry, the Handbook of Real-Time and Embedded Systems provides comprehensive covera

Download or read book Modeling and Optimization of Parallel and Distributed Embedded Systems written by Arslan Munir and published by John Wiley & Sons. This book was released on 2015-12-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art in research in parallel and distributed embedded systems, which have been enabled by developments in silicon technology, micro-electro-mechanical systems (MEMS), wireless communications, computer networking, and digital electronics. These systems have diverse applications in domains including military and defense, medical, automotive, and unmanned autonomous vehicles. The emphasis of the book is on the modeling and optimization of emerging parallel and distributed embedded systems in relation to the three key design metrics of performance, power and dependability. Key features: Includes an embedded wireless sensor networks case study to help illustrate the modeling and optimization of distributed embedded systems. Provides an analysis of multi-core/many-core based embedded systems to explain the modeling and optimization of parallel embedded systems. Features an application metrics estimation model; Markov modeling for fault tolerance and analysis; and queueing theoretic modeling for performance evaluation. Discusses optimization approaches for distributed wireless sensor networks; high-performance and energy-efficient techniques at the architecture, middleware and software levels for parallel multicore-based embedded systems; and dynamic optimization methodologies. Highlights research challenges and future research directions. The book is primarily aimed at researchers in embedded systems; however, it will also serve as an invaluable reference to senior undergraduate and graduate students with an interest in embedded systems research.

Download or read book Real Time Embedded Systems written by Christos Koulamas and published by MDPI. This book was released on 2019-01-10 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Real-Time Embedded Systems" that was published in Electronics

Download or read book Middleware for Communications written by Qusay Mahmoud and published by John Wiley & Sons. This book was released on 2005-06-10 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art guide to middleware technologies, and their pivotal role in communications networks. Middleware is about integration and interoperability of applications and services running on heterogeneous computing and communications devices. The services it provides - including identification, authentication, authorization, soft-switching, certification and security - are used in a vast range of global appliances and systems, from smart cards and wireless devices to mobile services and e-Commerce. Qusay H. Mahmoud has created an invaluable reference tool that explores the origins and current uses of middleware (highlighting the importance of such technologies as CORBA, J2EE and JMS) and has thus compiled the roadmap to future research in this area. Middleware for Communications: discusses the emerging fields of Peer-to-Peer (P2P) and grid middleware detailing middleware platforms such as JXTA and the Globus middleware toolkit. shows how Middleware will play a significant role in mobile computing. presents a Platform Supporting Mobile Applications (PLASMA) - a middleware platform that consists of components for location, event, and profile handling of Location-Based Services. introduces middleware security focusing on the appropriate aspects of CORBA, J2EE, and .NET and demonstrates how to realize complex security capabilities such as role-based access control (RBAC) and mandatory access control (MAC). discusses how Quality of Service (QoS) component middleware can be combined with Model Driven Architecture (MDA) technologies to rapidly develop, generate, assemble and deploy flexible communications applications. This incomparable overview of middleware for communications is suitable for graduate students and researchers in communications and computing departments. It is also an authoritative guide for engineers and developers working on distributed systems, mobile computing and networked appliances.

Download or read book Middkeware 2000 written by Joseph Sventek and published by Springer Science & Business Media. This book was released on 2000-03-23 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the IFIP/ACM International Conference on Distributed Systems Platforms and Open Distributed Processing, Middleware 2000, held in New York, NY, USA, in April 2000. The 21 revised full papers presented were carefully selected from a total of 70 submissions. The book offers an excellent state-of-the-art report on research in the design, implementation, deployment, and evaluation of distributed systems platforms and architectures for future networked environments. The papers are organized in sections on caching, indirection, reflection, messaging, quality of service, transactions and workflow, and composition.

Download or read book Embedded Systems Design written by Bruno Bouyssounouse and published by Springer Science & Business Media. This book was released on 2005-03-30 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensive and increasing use of embedded systems and their integration in everyday products mark a significant evolution in information science and technology. Nowadays embedded systems design is subject to seamless integration with the physical and electronic environment while meeting requirements like reliability, availability, robustness, power consumption, cost, and deadlines. Thus, embedded systems design raises challenging problems for research, such as security, reliable and mobile services, large-scale heterogeneous distributed systems, adaptation, component-based development, and validation and tool-based certification. This book results from the ARTIST FP5 project funded by the European Commision. By integration 28 leading European research institutions with many top researchers in the area, this book assesses and strategically advances the state of the art in embedded systems. The coherently written monograph-like book is a valuable source of reference for researchers active in the field and serves well as an introduction to scientists and professionals interested in learning about embedded systems design.

Download or read book Predictable and Runtime Adaptable Network On Chip for Mixed critical Real time Systems written by Sebastian Tobuschat and published by Cuvillier. This book was released on 2019-03-07 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The industry of safety-critical and dependable embedded systems calls for even cheaper, high performance platforms that allow flexibility and an efficient verification of safety and real-time requirements. In this sense, flexibility denotes the ability to (online) adapt a system to changes (e.g. changing environment, application dynamics, errors) and the reuse-ability for different use cases. To cope with the increasing complexity of interconnected functions and to reduce the cost and power consumption of the system, multicore systems are used to efficiently integrate different processing units in the same chip. Networks-on-chip (NoCs), as a modular interconnect, are used as a promising solution for such multiprocessor systems on chip (MPSoCs), due to their scalability and performance. Hence, future NoC designs must face the aforementioned challenges. For safety-critical systems, a major goal is the avoidance of hazards. For this, safety-critical systems are qualified or even certified to prove the correctness of the functioning under all possible cases. A predictable behavior of the NoC can help to ease the qualification process (e.g. formal analysis) of the system. To achieve the required predictability, designers have two classes of solutions: isolation (quality of service (QoS) mechanisms) and (formal) analysis. For mixed-criticality systems, isolation and analysis approaches must be combined to efficiently achieve the desired predictability. Isolation techniques are used to bound interference between different application classes. And analysis can then be applied verifying the real-time applications and sufficient isolation properties. Traditional NoC analysis and architecture concepts tackle only a subpart of the challenges-they focus on either performance or predictability. Existing, predictable NoCs are deemed too expensive and inflexible to host a variety of applications with opposing constraints. And state-of-the-art analyses neglect certain platform pro

Download or read book Middleware for Communications written by Qusay Mahmoud and published by John Wiley & Sons. This book was released on 2004-07-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art guide to middleware technologies, and their pivotal role in communications networks. Middleware is about integration and interoperability of applications and services running on heterogeneous computing and communications devices. The services it provides - including identification, authentication, authorization, soft-switching, certification and security - are used in a vast range of global appliances and systems, from smart cards and wireless devices to mobile services and e-Commerce. Qusay H. Mahmoud has created an invaluable reference tool that explores the origins and current uses of middleware (highlighting the importance of such technologies as CORBA, J2EE and JMS) and has thus compiled the roadmap to future research in this area. Middleware for Communications: discusses the emerging fields of Peer-to-Peer (P2P) and grid middleware detailing middleware platforms such as JXTA and the Globus middleware toolkit. shows how Middleware will play a significant role in mobile computing. presents a Platform Supporting Mobile Applications (PLASMA) - a middleware platform that consists of components for location, event, and profile handling of Location-Based Services. introduces middleware security focusing on the appropriate aspects of CORBA, J2EE, and .NET and demonstrates how to realize complex security capabilities such as role-based access control (RBAC) and mandatory access control (MAC). discusses how Quality of Service (QoS) component middleware can be combined with Model Driven Architecture (MDA) technologies to rapidly develop, generate, assemble and deploy flexible communications applications. This incomparable overview of middleware for communications is suitable for graduate students and researchers in communications and computing departments. It is also an authoritative guide for engineers and developers working on distributed systems, mobile computing and networked appliances.

Download or read book Embedded Software written by Thomas A. Henzinger and published by Springer. This book was released on 2003-06-30 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the omnipresence of micro devices in our daily lifes embedded software has gained tremendous importance in both science and industry. This volume contains 34 invited papers from the First International Workshop on Embedded Systems. They present latest research results from different areas of computer science that are traditionally distinct but relevant to embedded software development (such as, for example, component based design, functional programming, real-time Java, resource and storage allocation, verification). Each paper focuses on one topic, showing the inter-relationship and application to the design and implementation of embedded software systems.

Download or read book Ambient Intelligence Impact on Embedded System Design written by Twan Basten and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hugo de Man Professor Katholieke Universiteit Leuven Senior Research Fellow IMEC The steady evolution of hardware, software and communications technology is rapidly transforming the PC- and dot.com world into the world of Ambient Intelligence (AmI). This next wave of information technology is fundam- tally different in that it makes distributed wired and wireless computing and communication disappear to the background and puts users to the foreground. AmI adapts to people instead of the other way around. It will augment our consciousness, monitor our health and security, guide us through traffic etc. In short, its ultimate goal is to improve the quality of our life by a quiet, reliable and secure interaction with our social and material environment. What makes AmI engineering so fascinating is that its design starts from studying person to world interactions that need to be implemented as an int- ligent and autonomous interplay of virtually all necessary networked electronic intelligence on the globe. This is a new and exciting dimension for most elect- cal and software engineers and may attract more creative talent to engineering than pure technology does. Development of the leading technology for AmI will only succeed if the engineering research community is prepared to join forces in order to make Mark Weiser’s dream of 1991 come true. This will not be business as usual by just doubling transistor count or clock speed in a microprocessor or increasing the bandwidth of communication.