Download or read book Sampling in Digital Signal Processing and Control written by Arie Feuer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Undoubtably one of the key factors influencing recent technology has been the advent of high speed computational tools. Virtually every advanced engi neering system we come in contact with these days depends upon some form of sampling and digital signal processing. Well known examples are digital tele phone systems, digital recording of audio signals and computer control. These developments have been matched by the appearance of a plethora of books which explain a variety of analysis, synthesis and design tools applica ble to sampled-data systems. The reader might therefore wonder what is distinc tive about the current book. Our observation of the existing literature is that the underlying continuous-time system is usually forgotten once the samples are tak en. The alternative point of view, adopted in this book, is to formulate the analy sis in such a way that the user is constantly reminded of the presence of the under lying continuous-time signals. We thus give emphasis to two aspects of sampled-data analysis: Firstly, we formulate the various algorithms so that the appropriate contin uous-time case is approached as the sampling rate increases. Secondly we place emphasis on the continuous-time output response rath er than simply focusing on the sampled response.
Download or read book Digital Signal Processing written by Li Tan and published by Academic Press. This book was released on 2013-01-21 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing, Second Edition enables electrical engineers and technicians in the fields of biomedical, computer, and electronics engineering to master the essential fundamentals of DSP principles and practice. Many instructive worked examples are used to illustrate the material, and the use of mathematics is minimized for easier grasp of concepts. As such, this title is also useful to undergraduates in electrical engineering, and as a reference for science students and practicing engineers. The book goes beyond DSP theory, to show implementation of algorithms in hardware and software. Additional topics covered include adaptive filtering with noise reduction and echo cancellations, speech compression, signal sampling, digital filter realizations, filter design, multimedia applications, over-sampling, etc. More advanced topics are also covered, such as adaptive filters, speech compression such as PCM, u-law, ADPCM, and multi-rate DSP and over-sampling ADC. New to this edition: MATLAB projects dealing with practical applications added throughout the book New chapter (chapter 13) covering sub-band coding and wavelet transforms, methods that have become popular in the DSP field New applications included in many chapters, including applications of DFT to seismic signals, electrocardiography data, and vibration signals All real-time C programs revised for the TMS320C6713 DSK Covers DSP principles with emphasis on communications and control applications Chapter objectives, worked examples, and end-of-chapter exercises aid the reader in grasping key concepts and solving related problems Website with MATLAB programs for simulation and C programs for real-time DSP
Download or read book Introduction to Digital Signal Processing written by Robert Meddins and published by Newnes. This book was released on 2000-09-05 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Digital Signal Processing covers the basic theory and practice of digital signal processing (DSP) at an introductory level. As with all volumes in the Essential Electronics Series, this book retains the unique formula of minimal mathematics and straightforward explanations. The author has included examples throughout of the standard software design package, MATLAB and screen dumps are used widely throughout to illustrate the text. Ideal for students on degree and diploma level courses in electric and electronic engineering, 'Introduction to Digital Signal Processing' contains numerous worked examples throughout as well as further problems with solutions to enable students to work both independently and in conjunction with their course. Assumes only minimum knowledge of mathematics and electronics Concise and written in a straightforward and accessible style Packed with worked examples, exercises and self-assesment questions
Download or read book Digital Signal Processing 101 written by Michael Parker and published by Newnes. This book was released on 2010-05-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing 101: Everything You Need to Know to Get Started provides a basic tutorial on digital signal processing (DSP). Beginning with discussions of numerical representation and complex numbers and exponentials, it goes on to explain difficult concepts such as sampling, aliasing, imaginary numbers, and frequency response. It does so using easy-to-understand examples and a minimum of mathematics. In addition, there is an overview of the DSP functions and implementation used in several DSP-intensive fields or applications, from error correction to CDMA mobile communication to airborne radar systems. This book is intended for those who have absolutely no previous experience with DSP, but are comfortable with high-school-level math skills. It is also for those who work in or provide components for industries that are made possible by DSP. Sample industries include wireless mobile phone and infrastructure equipment, broadcast and cable video, DSL modems, satellite communications, medical imaging, audio, radar, sonar, surveillance, and electrical motor control. Dismayed when presented with a mass of equations as an explanation of DSP? This is the book for you! Clear examples and a non-mathematical approach gets you up to speed with DSP Includes an overview of the DSP functions and implementation used in typical DSP-intensive applications, including error correction, CDMA mobile communication, and radar systems
Download or read book Digital Signal Processing Demystified written by James D. Broesch and published by Elsevier. This book was released on 2000-02-20 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: James D. Broesch is a staff engineer for General Atomics, where he is responsible for the design and development of several advanced control systems used on fusion control programs. He also teaches classes in signal processing and hardware design at the University of California-San Diego. · Integrated book/software package allows readers to simulate digital signal processing (DSP) situations and experiment with effects of different DSP techniques.· Gives an applications-oriented approach to DSP instead of a purely mathematical one.· The accompanying CD includes a DSP "calculator" to help solve design problems
Download or read book High Sampling Rate Dynamic Inversion written by Herrick Lin Chang and published by . This book was released on 2012 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few decades, computational power and speed has made it such that the Controls literature has moved away from addressing issues of finite-word-length (FWL) issues, quantization, and limited computational resources. On the other hand, the signal processing community has studied this issue extensively. In recent years, the introduction of Nano and Microelectromechanical systems (MEMS) with large bandwidth systems requires the use of high-sampling rate controllers. To satisfy such high sampling-rates, fixed-point based platforms such as Field Programmable Gate Arrays (FPGAs) and fixed-point micro-controllers are needed. This trend results in a need for high-sampling rate controllers that are more sophisticated than simple loop shaping while addressing the issues of FWL effects and limited computational resources. The aim of this dissertation is to introduce novel controllers that incorporate signal processing techniques and address these issues with controller design/realizations to control high bandwidth electro-mechanical systems.
Download or read book Understanding Digital Signal Processing written by Richard G. Lyons and published by Pearson Education. This book was released on 2010-11-01 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amazon.com’s Top-Selling DSP Book for Seven Straight Years—Now Fully Updated! Understanding Digital Signal Processing, Third Edition, is quite simply the best resource for engineers and other technical professionals who want to master and apply today’s latest DSP techniques. Richard G. Lyons has updated and expanded his best-selling second edition to reflect the newest technologies, building on the exceptionally readable coverage that made it the favorite of DSP professionals worldwide. He has also added hands-on problems to every chapter, giving students even more of the practical experience they need to succeed. Comprehensive in scope and clear in approach, this book achieves the perfect balance between theory and practice, keeps math at a tolerable level, and makes DSP exceptionally accessible to beginners without ever oversimplifying it. Readers can thoroughly grasp the basics and quickly move on to more sophisticated techniques. This edition adds extensive new coverage of FIR and IIR filter analysis techniques, digital differentiators, integrators, and matched filters. Lyons has significantly updated and expanded his discussions of multirate processing techniques, which are crucial to modern wireless and satellite communications. He also presents nearly twice as many DSP Tricks as in the second edition—including techniques even seasoned DSP professionals may have overlooked. Coverage includes New homework problems that deepen your understanding and help you apply what you’ve learned Practical, day-to-day DSP implementations and problem-solving throughout Useful new guidance on generalized digital networks, including discrete differentiators, integrators, and matched filters Clear descriptions of statistical measures of signals, variance reduction by averaging, and real-world signal-to-noise ratio (SNR) computation A significantly expanded chapter on sample rate conversion (multirate systems) and associated filtering techniques New guidance on implementing fast convolution, IIR filter scaling, and more Enhanced coverage of analyzing digital filter behavior and performance for diverse communications and biomedical applications Discrete sequences/systems, periodic sampling, DFT, FFT, finite/infinite impulse response filters, quadrature (I/Q) processing, discrete Hilbert transforms, binary number formats, and much more
Download or read book Digital Signal Processing for Measurement Systems written by Gabriele D'Antona and published by Springer Science & Business Media. This book was released on 2006-10-28 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent Senior undergraduate/graduate textbook offers an unprecedented measurement of science perspective on DSP theory and applications, a wealth of definitions and real-life examples making it invaluable for students, while practical.
Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.
Download or read book Practical Digital Signal Processing written by Edmund Lai and published by Elsevier. This book was released on 2003-10-21 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to introduce the general area of Digital Signal Processing from a practical point of view with a working minimum of mathematics. The emphasis is placed on the practical applications of DSP: implementation issues, tricks and pitfalls. Intuitive explanations and appropriate examples are used to develop a fundamental understanding of DSP theory, laying a firm foundation for the reader to pursue the matter further. The reader will develop a clear understanding of DSP technology in a variety of fields from process control to communications. * Covers the use of DSP in different engineering sectors, from communications to process control * Ideal for a wide audience wanting to take advantage of the strong movement towards digital signal processing techniques in the engineering world * Includes numerous practical exercises and diagrams covering many of the fundamental aspects of digital signal processing
Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.
Download or read book Digital Signal Processing and Applications written by Dag Stranneby and published by Elsevier. This book was released on 2004-09-10 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: A uniquely practical DSP text, this book gives a thorough understanding of the principles and applications of DSP with a minimum of mathematics, and provides the reader with an introduction to DSP applications in telecoms, control engineering and measurement and data analysis systems.The new edition contains: Expanded coverage of the basic concepts to aid understanding New sections on filter sysnthesis, control theory and contemporary topics of speech and image recognition Full solutions to all questions and exercises in the book Assuming the reader already has some prior knowledge of signal theory, this textbook will be highly suitable for undergraduate and postgraduate students in electrical and electronic engineering taking introductory and advanced courses in DSP, as well as courses in communications and control systems engineering. It will also prove an invaluable introduction to DSP and its applications for the professional engineer. Expanded coverage of the basic concepts to aid understanding, along with a wide range of DSP applications New textbook features included throughout, including learning objectives, summary sections, exercises and worked examples to increase accessibility of the text Full solutions to all questions and exercises included in the book
Download or read book Applied Digital Signal Processing written by Dimitris G. Manolakis and published by Cambridge University Press. This book was released on 2011-11-21 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the basic concepts and methodologies of digital signal processing with this systematic introduction, without the need for an extensive mathematical background. The authors lead the reader through the fundamental mathematical principles underlying the operation of key signal processing techniques, providing simple arguments and cases rather than detailed general proofs. Coverage of practical implementation, discussion of the limitations of particular methods and plentiful MATLAB illustrations allow readers to better connect theory and practice. A focus on algorithms that are of theoretical importance or useful in real-world applications ensures that students cover material relevant to engineering practice, and equips students and practitioners alike with the basic principles necessary to apply DSP techniques to a variety of applications. Chapters include worked examples, problems and computer experiments, helping students to absorb the material they have just read. Lecture slides for all figures and solutions to the numerous problems are available to instructors.
Download or read book An Introduction to Digital Signal Processing written by Stanley Mneney and published by River Publishers. This book was released on 2009-01-10 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mneney's text focuses on basic concepts of digital signal processing, MATLAB simulation, and implementation on selected DSP hardware.
Download or read book Digital Filters and Signal Processing in Electronic Engineering written by S M Bozic and published by Elsevier. This book was released on 1998-10-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: From industrial and teaching experience the authors provide a blend of theory and practice of digital signal processing (DSP) for advanced undergraduate and post-graduate engineers reading electronics. This fast-moving, developing area is driven by the information technology revolution. It is a source book in research and development for embedded system design engineers, designers in real-time computing, and applied mathematicians who apph DSP techniques in telecommunications, aerospace (control systems), satellite communications, instrumentation, and medical technology (ultrasound and magnetic resonance imaging).The book is particularly useful at the hardware end of DSP, with its emphasis on practical I)SP devices and the integration of basic processes with appropriate software. It is unique to find in one volume the implementation of the equations as algorithms, not only in \IATLAB but right up to a working DSP-based scheme. Other relevant architectural features include number representations, multiply-accumulate, special addressing modes, zero overhead iteration schemes. and single and multiple nlicroprocessors which will allow the readers to compare and understand both current processors and future DSP developments.Fundamental signal processing procedures are introduced and developed: also convolution. correlation, the Discrete Fourier Transform and its fast computation algorithms. Then follo finite impulse response (FIR) filters, infinite impulse response (IlR) filters, multirate filters, adaptive filters, and topics from communication and control. I)esign examples are given in all of these cases, taken through an algorithm testing stage using MATLAB. The design of the latter. using C language models, is explained together with the experimental results of real time integer implementations.Academic prerequisites are first and second year university mathematics, an introductor knowledge of circuit theor ‘and microprocessors. and C Language. Provides an unusual blend of theory and practice of digital signal processing (DSP) Discusses fundamental signal processing procedures, convolution, correlation, the Discrete Fourier Transform and its fast computation algorithms Includes number representations, multiply-accumulate, special addressing modes, zero overhead iteration schemes, and single and multiple instructions
Download or read book Real time Digital Signal Processing written by Sen-Maw Kuo and published by 清华大学出版社有限公司. This book was released on 2003 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Digital Signal Processing written by Tae Hong Park and published by World Scientific. This book was released on 2010 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book offers an introduction to digital signal processing (DSP) with an emphasis on audio signals and computer music ... This book is designed for both technically and musically inclined readers alike--folks with a common goal of exploring digital signal processing"--Cover, p. [4].