Download or read book Safety Valves in Oil and Gas Plants written by Karan Sotoodeh and published by Wiley. This book was released on 2025-02-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "When an overpressure event occurs in the piping or facility, an automated on--off safety valve shuts down the system immediately. Pressure Safety Valves (PSVs) are included in the design of processing facilities to protect assets such as piping and vessels by relieving system pressures during abnormal plant conditions. PSVs are safety-critical devices, and there may easily be hundreds of them installed on a plant depending on the size and complexity of same. In most countries, industries are legally required to protect pressure vessels and other equipment by using relief valves. Also, in most countries, equipment design codes such as those provided by the ASME, API and other organizations like ISO (ISO 4126) must be complied with. These codes include design standards for relief valves and schedules for periodic inspection and testing after valves have been removed by the company engineer"--
Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today's subsea technology. - Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies - Learn and review the applicable standards and specifications from API and ISO in one convenient location - Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Download or read book The Safety Relief Valve Handbook written by Marc Hellemans and published by Elsevier. This book was released on 2009-08-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. - No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves - The Safety Valve Handbook contains all of the vital technical and standards information relating to safety valves used in the process industry for positive pressure applications. - Explains technical issues of safety valve operation in detail, including identification of benefits and pitfalls of current valve technologies - Enables informed and creative decision making in the selection and use of safety valves - The Handbook is unique in addressing both US and European codes:- covers all devices subject to the ASME VIII and European PED (pressure equipment directive) codes;- covers the safety valve recommendations of the API (American Petroleum Institute);- covers the safety valve recommendations of the European Normalisation Committees;- covers the latest NACE and ATEX codes;- enables readers to interpret and understand codes in practice - Extensive and detailed illustrations and graphics provide clear guidance and explanation of technical material, in order to help users of a wide range of experience and background (as those in this field tend to have) to understand these devices and their applications - Covers calculating valves for two-phase flow according to the new Omega 9 method and highlights the safety difference between this and the traditional method - Covers selection and new testing method for cryogenic applications (LNG) for which there are currently no codes available and which is a booming industry worldwide - Provides full explanation of the principles of different valve types available on the market, providing a selection guide for safety of the process and economic cost - Extensive glossary and terminology to aid readers' ability to understand documentation, literature, maintenance and operating manuals - Accompanying website provides an online valve selection and codes guide.
Download or read book Petroleum and Natural Gas Industries Subsurface Safety Valve Systems Design Installation Operation and Redress written by British Standards Institute Staff and published by . This book was released on 2004-08-02 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum technology, Petroleum, Petroleum extraction, Natural gas, Natural gas extraction, Gas technology, Safety valves, Valves, Drilling (mineral extraction), Design, Installation, Technical documents, Test methods
Download or read book Cryogenic Valves for Liquefied Natural Gas Plants written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2022-05-18 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas and liquefied natural gas (LNG) continue to grow as a part of the sustainable energy mix. While oil and gas companies look to lower emissions, one key refinery component that contributes up to 60% of emissions are valves, mainly due to poor design, sealing, and testing. Cryogenic Valves for Liquefied Natural Gas Plants delivers a much-needed reference that focuses on the design, testing, maintenance, material selection, and standards needed to stay environmentally compliant at natural gas refineries. Covering technical definitions, case studies, and Q&A, the reference includes all ranges of natural gas compounds, including LPG, CNG, NGL, and PNG. Key design considerations are included that are specific for cryogenic services, including a case study on cryogenic butterfly valves. The material selection process can be more complex for cryogenic services, so the author goes into more detail about materials that adhere to cryogenic temperature resistance. Most importantly, testing of valves is covered in depth, including shell test, closure or seat test, and thermal shock tests, along with tactics on how to prevent dangerous cryogenic leaks, which are very harmful to the environment. The book is a vital resource for today's natural gas engineers. - Teaches LNG valve design, including sealing selection, wall thickness calculation of the valve body and bonnet, and proper material selection - Provides tactics on how to prevent cryogenic leaks with compliant valve testing - Applies natural gas calculations that will better support the LNG supply chain - Enables readers to understand cryogenic valve standards, including EN, ISO, and MSS SP
Download or read book Petroleum and Natural Gas Industries written by and published by . This book was released on 2005 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Consolidated Pop Safety Valves written by Consolidated Safety Valve Company and published by . This book was released on 1909 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum and Natural Gas Industries Downhole Equipment Subsurface Safety Valve Equipment written by British Standards Institute Staff and published by . This book was released on 2005-01-12 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum extraction, Natural gas extraction, Petroleum technology, Underwater extraction, Safety valves, Valves, Valve components, Design, Approval testing, Verification, Quality control, Calibration, Elastomers, Inspection, Heat treatment, Mechanical properties of materials, Leak tests, Pressure testing, Seals, Identification methods
Download or read book Safety Engineering in the Oil and Gas Industry written by Karan Sotoodeh and published by CRC Press. This book was released on 2023-08-10 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: When accidents occur in the oil and gas industry, the impacts can be profound. Serious injury or death to workers, environmental disasters and colossal costs for insurance or clean ups make the industry a hazardous one to operate in. Disasters become major news events such as the Prestige oil spill, Piper Alpha, Exxon Valdez oil spill and Deepwater Horizon. A move towards improving the health and safety of the industry is underway. This book emphasizes controlling, managing, and mitigating the risk of hazards in the oil and gas industry, increasing safety, and protecting the environment by identifying the hazards in the oil and gas industry through safety engineering techniques and management methods. Safety Engineering in the Oil and Gas Industry discusses how to improve safety and reliability in the oil and gas industry so that hazards can be reduced to the lowest level feasible. It covers the techniques needed to operate safely in an oil and/or gas industry setting, the standards that should be adhered to, the impacts of PPE, fire and explosions, equipment and infrastructure failures and storage and reliability engineering, amongst many other topics. This book is written in an easy-to-read and appealing style and multiple-choice questions are included to help with learning and understanding the concepts included. Underpinned by real life case studies and examples, this book aims to allow readers to consider how they can reduce the costs associated with bad safety practices to their business through maintained and consistent health, safety and environmental (HSE) standards. This book is a must-read for any student or professional studying or working in the oil and gas industries. It also has additional appeal to those with an academic or professional interest in occupational health and safety, civil engineering, offshore engineering and maritime engineering.
Download or read book A Practical Guide to Piping and Valves for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-01-30 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today's valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project
Download or read book Industrial Valves written by Karan Sotoodeh and published by John Wiley & Sons. This book was released on 2023-05-02 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: INDUSTRIAL VALVES Improve the design and safety of your industrial valves with this comprehensive guide Industrial valves are used to regulate the flow of liquids, gases, or slurries. They are fundamental to multiple industries, including marine shipping, in which valves regulate power supply, wastewater, water for fire-fighting, and other shipboard essentials. They are also critical to the oil and gas industry, where valves are used to control the flow of oil or gas out of deposits, direct the crude oil refining process, protect key areas and equipment from spillage and overflow, and more. Without the safety and regulating power provided by industrial valves these industries could not proceed. This book provides a thorough introduction to the modeling and calculation of key challenges related to valve design, manufacturing, and operation. It focuses particularly on solving problems of material failure due to corrosion and cavitation, allowing readers to construct valve designs that will maximize safety and reliability. It is a critical resource in helping protect workplaces, industrial sites, and valuable equipment from the externalities of these fundamental industrial resources. Readers will also find: Applied calculations based on real-life cases from industry Information based on international standards including NORSOK (Norwegian standard) and IECs (European standards) Based on decades of experience in the relevant industries Industrial Valves is a useful reference for engineers and practitioners in the oil and gas and marine industries, piping engineers, valve manufacturers, and more.
Download or read book Prevention of Valve Fugitive Emissions in the Oil and Gas Industry written by Karan Sotoodeh and published by Elsevier. This book was released on 2021-05-26 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prevention of Valve Fugitive Emissions in the Oil and Gas Industry delivers a critical reference for oil and gas engineers and managers to get up-to-speed on all factors surrounding valve fugitive emissions. New technology is included on monitoring, with special attention given to valve seals which are typically the biggest emitting factor on the valve. Proper testing requirements to mitigate future leaks are also covered. Rounding out with international standards, laws and specifications to apply to projects around the world, this book gives today's engineers updated knowledge on how to lower emissions on today's equipment. Helps readers understand the sources and key factors that contribute to fugitive emissions and leakage from oil and gas valves Teaches ways to select proper seals and perform valve testing to mitigate future emissions Includes international standards, laws and specifications to help readers stay compliant and environmentally responsible
Download or read book Piping and Instrumentation Diagram written by Avinashkumar Vinodkumar Karre and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-07-04 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides stepwise guidelines for the development of Piping and Instrumentation Diagrams for all different areas of chemical engineering such as pumps, heat exchangers, columns, compressors, vessels, instrumentation, control logic, piping, valves, notes, equipment design, and flare systems. It also provides guidance to commonly used methodology to mark-up each subsystem mentioned earlier and discusses common tools used in the industry.
Download or read book Safety at Natural gasoline Plants written by G. B. Shea and published by . This book was released on 1929 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety valves written by William Barnet Le Van and published by . This book was released on 1892 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Case Studies of Material Corrosion Prevention for Oil and Gas Valves written by Karan Sotoodeh and published by Elsevier. This book was released on 2022-06-09 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers working in oil and gas operations understand that corrosion is a costly expense that increases emissions and damages the environment, but many standards do not provide practical examples with solutions, leaving engineers to learn through experience. Case Studies of Material Corrosion Prevention for Oil and Gas Valves delivers a critical reference for engineers and corrosion researchers to get up to speed quickly through practical examples. Packed with nearly 30 real-world case studies, the reference gives the engineer standardized knowledge on how to maintain, select, and prevent typical corrosion problems in a variety of oil and gas settings. Subsea, offshore, refineries, and processing plants are all included, covering a variety of challenges such as chloride stress cracking, how to use Teflon powder to prevent cross contamination, and carbon dioxide corrosion. Organized for quick discovery, Case Studies of Material Corrosion Prevention for Oil and Gas Valves gives engineers the much-needed tool to safely protect their assets and the environment.
Download or read book Recommended Practice for Installation Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore written by American Petroleum Institute. Production Department and published by . This book was released on 1991 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
