Download or read book Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants written by Joaquim Casal and published by Elsevier. This book was released on 2007-12-08 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants analyzes the different major accidents which can occur in process plants and during the transportation of hazardous materials. The main features of fires, explosions and toxic releases are discussed, and a set of mathematical models allowing the prediction of their effects and consequences are explained. With a practical approach, the models are applied to simple illustrative examples, as well as to more complex real cases. The use of these calculations in the frame of Quantitative Risk Analysis is also treated. Evaluation of the effects of major accidents in industrial installations covers the following topics: general introduction, source term, fire accidents, vapour cloud explosions, BLEVEs and vessel explosions, atmospheric dispersion of toxic or flammable clouds, vulnerability, and quantitative risk analysis. This book is a useful tool for engineering professionals, as well as an interesting reference for teaching at graduate and post-graduate levels. Both the essential aspects and the calculations related to the diverse accidents are discussed The prediction of effects and consequences is performed with a practical approach Recent contributions from literature have been included Subjects of increasing importance have been included: an extense analysis of BLEVEs, for example, or the atmospheric dispersion of pathogenic agents

Download or read book Fluid Mechanics for Industrial Safety and Environmental Protection written by T.K. Fannelöp and published by Newnes. This book was released on 2013-05-20 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of the science of fluid mechanics to the new and expanding fields of industrial safety and environmental protection are discussed in this volume. The material is organized in accordance with the chain-of-events in real accidents, starting with the loss of containment of hazardous fluids, going on to the spreading and mixing processes in water or air, and ending with the damage loads caused by explosions, fires or toxic content. To develop solutions relevant to the wide range of problems considered, it is necessary to draw on material from various branches of fluid mechanics, i.e. from the engineering fields (aero- and gas- and hydrodynamics, hydraulics, heat transfer and two-phase flows) as well as from geophysics (environmental flows, boundary-layer meteorology). The relevant solutions are developed from the fundamental equations, but are kept simple for transparency and understanding. To achieve this, the simplifications offered by scaling, similarity and entrainment concepts are used extensively. Many of the solutions are novel but have been confirmed by laboratory experiments. The material in the book has been used as a teaching text on Master's level, but the content will be useful also for practising engineers and scientists engaged in safety and environmental impact. The problems considered have been encountered in consultancy work for industry and government agencies. The coherent presentation and the fundamental basis for analytical developments, makes the material accessible also to readers not acquainted with the field.

Download or read book Design for Safety written by Louis J. Gullo and published by John Wiley & Sons. This book was released on 2018-02-20 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop reference guide to design for safety principles and applications Design for Safety (DfSa) provides design engineers and engineering managers with a range of tools and techniques for incorporating safety into the design process for complex systems. It explains how to design for maximum safe conditions and minimum risk of accidents. The book covers safety design practices, which will result in improved safety, fewer accidents, and substantial savings in life cycle costs for producers and users. Readers who apply DfSa principles can expect to have a dramatic improvement in the ability to compete in global markets. They will also find a wealth of design practices not covered in typical engineering books—allowing them to think outside the box when developing safety requirements. Design Safety is already a high demand field due to its importance to system design and will be even more vital for engineers in multiple design disciplines as more systems become increasingly complex and liabilities increase. Therefore, risk mitigation methods to design systems with safety features are becoming more important. Designing systems for safety has been a high priority for many safety-critical systems—especially in the aerospace and military industries. However, with the expansion of technological innovations into other market places, industries that had not previously considered safety design requirements are now using the technology in applications. Design for Safety: Covers trending topics and the latest technologies Provides ten paradigms for managing and designing systems for safety and uses them as guiding themes throughout the book Logically defines the parameters and concepts, sets the safety program and requirements, covers basic methodologies, investigates lessons from history, and addresses specialty topics within the topic of Design for Safety (DfSa) Supplements other books in the series on Quality and Reliability Engineering Design for Safety is an ideal book for new and experienced engineers and managers who are involved with design, testing, and maintenance of safety critical applications. It is also helpful for advanced undergraduate and postgraduate students in engineering. Design for Safety is the second in a series of “Design for” books. Design for Reliability was the first in the series with more planned for the future.

Download or read book Safety Series written by International Atomic Energy Agency and published by . This book was released on 1986 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Search for Safety written by John Langan and published by Townsend Press. This book was released on 2006-06 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ben McKee desperately tries to find a way to get himself and his mother out of an abusive situation after his mom marries Larry Taylor.

Download or read book Safety Code Series written by United States. Bureau of Labor Statistics and published by . This book was released on 1923 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Series on Chemical Accidents Guidance on Developing Safety Performance Indicators For Industry written by OECD and published by OECD Publishing. This book was released on 2014-09-03 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Guidance on Developing Safety Performance Indicators (“Guidance on SPI”) was prepared to assist enterprises that wish to implement and/or review Safety Performance Indicator Programmes.

Download or read book Managing Health and Safety at Work Super Series written by and published by Routledge. This book was released on 2007 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The philosophy of accident prevention is, in essence, simple: identify the hazards, and then put all necessary measures in place for eradicating them, or at the least, protecting people from them. As we will discuss, most accidents at work are the result of a failure to put this philosophy into practice in an adequate manner"--Page xiii.

Download or read book Series on Chemical Accidents Guidance on Developing Safety Performance Indicators For Public Authorities and Communities Public written by OECD and published by OECD Publishing. This book was released on 2014-09-03 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Document was designed to serve as a tool to assist industrial enterprises, public authorities, and communities near hazardous installations world-wide develop and implement a means to assess the success of their chemical safety activities.

Download or read book Safety of Reactive Chemicals and Pyrotechnics written by Y. Wada and published by Elsevier. This book was released on 1995-11-20 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents involving reactive chemicals can often be prevented, or their effects alleviated, if those handling them have a sound knowledge both of their hazardous properties and of appropriate handling methods. This book addresses this need. It opens with a definition of the key technical terms and evaluation methods for hazardous materials are outlined. Chapter 2 covers accidents involving self-reactive substances, accidents occurring during chemical reactions, and accidents involving hazardous products in the event of an earthquake. In the next three chapters, methods for evaluating fire and explosion hazards of reactive substances are covered. The test methods described include DSC test using a sealed cell, impact sensitivity tests, the ignitability test, burning tests, the pyrolytic severity test, and shock sensitivity tests. Recently, the Japanese Fire Services Law was amended, requiring hazardous materials to be evaluated and classified by appropriate tests. These test methods, described in chapter 4, are related to oxidising solids, combustible solids, spontaneous ignition substances, and water-reactive substances. The final chapter gives examples of the safety assessment of various pyrotechnics. There are few books available on this subject and none so comprehensive. Each of the methods described is practical, effective and of low cost; and many of the application results are from the author's own laboratory. The book will be invaluable to those in public and industrial safety laboratories, R & D chemical laboratories, Fire Departments, explosives manufacturers, and those responsible for the transportation of hazardous materials.

Download or read book Series on Chemical Accidents Corporate governance for process safety Guidance for senior leaders in high hazard industries written by OECD and published by OECD Publishing. This book was released on 2017-04-13 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Guidance on Corporate Governance for Process Safety draws attention to those at the top of industry to the need for high standards of corporate governance in relation to the management of high hazard industries. The Guidance encourages every director, CEO and President of a major hazard ...

Download or read book Industrial Safety Survey written by and published by . This book was released on 1928 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Series on Chemical Accidents OECD Guidance on Safety Performance Indicators A Companion to the OECD Guiding Principles for Chemical Accident Prevention Preparedness and Response written by OECD and published by OECD Publishing. This book was released on 2003-11-27 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidance on Safety Performance Indicators provides a systemic approach to measuring the success of stakeholders' chemical safety programmes by detailing targets, activity indicators and outcome indicators.

Download or read book Risk Assessment and Management in the Context of the Seveso II Directive written by Michalis D Christou and published by Elsevier. This book was released on 1998-02-18 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assessment and management of risk to society from the operation of chemical process plants and other industrial activities in which dangerous substances are produced, used, handled or stored will remain a topic of great importance in the next decade. In order to evaluate this specific risk on a qualitative and/or quantitative basis, the concepts of risk analyses are linked together in this book. The "performance based" and "goal oriented" regulatory requirements of the European Council's new "Seveso II Directive" for the identification of large scale industrial hazards, prevention of sudden and uncontrolled releases of dangerous substances from industrial plants and mitigation of serious consequences of industrial accidents to people and the environment are examined. The fact that risk assessment and management are key elements to such forms of regulation is also demonstrated. While the "Seveso II Directive" defines "what" has to be achieved on the control of major hazards involving dangerous substances within the European Union, the methods of risk assessment and management give guidance on "how" to achieve it. The text provides a practical guide for decision-makers in regulatory bodies and companies with a non-technical background. Scientists and engineers who are not yet familiar with the concepts of risk assessment and who want a survey of some fundamentals of, and principal results from, risk assessment studies and approaches primarily for applications in the context defined by the "Seveso Directives" will also find this book invaluable.

Download or read book Risk Management Series Design Guide for Improving Hospital Safety in Earthquakes Floods and High Winds written by and published by FEMA. This book was released on with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Risk Management Series Design Guide for Improving School Safety in Earthquakes Floods and High Winds written by and published by FEMA. This book was released on with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Risk Management Series Design Guide for Improving Critical Facility Safety from Flooding and High Winds written by U. S. Department Security and published by FEMA. This book was released on 2013-01-26 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: On August 29, 2005, Hurricane Katrina caused extensive damage to the coast along the Gulf of Mexico, resulting in an unprecedented relief, recovery, and reconstruction effort. This reconstruction presents a unique opportunity to rebuild the communities and public infrastructure using the latest hazard mitigation techniques proven to be more protective of lives and property. Critical facilities comprise all public and private facilities deemed by a community to be essential for the delivery of vital services, protection of special populations, and the provision of other services of importance for that community. This manual concentrates on a smaller group of facilities that are crucial for protecting the health and safety of the population: health care, educational, and emergency response facilities. The Design Guide for Improving Critical Facility Safety from Flooding and High Winds (FEMA 543) was developed with the support of the Federal Emergency Management Agency (FEMA) Region IV in the aftermath of Hurricane Katrina. This manual recommends incorporating hazard mitigation measures into all stages and at all levels of critical facility planning and design, for both new construction and the reconstruction and rehabilitation of existing facilities. It provides building professionals and decision makers with information and guidelines for implementing a variety of mitigation measures to reduce the vulnerability to damage and disruption of operations during severe flooding and high-wind events. The underlying theme of this manual is that by building more robust critical facilities that will remain operational during and after a major disaster, people's lives and the community's vitality can be better preserved and protected. The poor performance of many critical facilities in the affected areas was not unique to Hurricane Katrina. It was observed in numerous hurricanes dating back more than three decades. Several reasons may explain this kind of performance. In many cases the damaged facilities were quite old and were constructed well before the introduction of modern codes and standards. Some of the older facilities were damaged because building components had deteriorated as a result of inadequate maintenance. Many fa¬cilities occupy unsuitable buildings that were never intended for this type of use. Some newer facilities suffered damage as a result of deficiencies in design and construction or the application of inappropriate design criteria and standards. The primary objective of this manual is to assist the building design community and local officials and decision makers in adopting and implementing sound mitigation measures that will decrease the vulnerability of critical facilities to major disasters. The goals of this manual are to: Present and recommend the use of building design features and building materials and methods that can improve the performance of critical facilities in hazard-prone areas during and after flooding and high-wind events. m Introduce and provide guidelines for implementing flooding and high-wind mitigation best practices into the process of design, construction, and operation and maintenance of critical facilities; and To aid in the reconstruction of the Gulf Coast in the wake of Hurricane Katrina, this manual presents an overview of the principal planning and design considerations for improving the performance of critical facilities during, and in the aftermath of, flooding and high-wind events. It provides design guidance and practical recommendations for protecting critical facilities and their occupants against these natural hazards. It presents incremental approaches that can be implemented over time to decrease the vulnerability of buildings, but emphasizes the importance of incorporating the requirements for mitigation against flooding and high winds into the planning and design of critical facilities from the very beginning of the process.