Download or read book Guidelines for Safe Storage and Handling of Reactive Materials written by and published by Wiley-AIChE. This book was released on 1995-09-15 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: With new and growing interest in dealing with the hazards of reactive chemicals, this book offers guidelines that can significantly reduce the risk or mitigate the severity of accidents associated with storing and handling reactive materials. Necessary elements of a reliable system to prevent equipment or human failures that might lead to a reactive chemical incident are sound and responsible management policies, together with a combination of superior siting, design, fabrication, erection, inspection, monitoring, maintenance, operations and maintenance of facilities. These Guidelines deal with all of these elements with emphasis on design considerations.
Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by L. Bretherick and published by Elsevier. This book was released on 2016-10-27 with total page 2058 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bretherick's Handbook of Reactive Chemical Hazards, Fourth Edition, has been prepared and revised to give access to a wide and up-to-date selection of documented information to research students, practicing chemists, safety officers, and others concerned with the safe handling and use of reactive chemicals. This will allow ready assessment of the likely potential for reaction hazards which may be associated with an existing or proposed chemical compound or reaction system. A secondary, longer-term purpose is to present the information in a way which will, as far as possible, bring out the causes of, and interrelationships between, apparently disconnected facts and incidents. This handbook includes all information which had become available to the author by April 1989 on the reactivity hazards of individual elements or compounds, either alone or in combination. It begins with an introductory chapter that provides an overview of the complex subject of reactive chemical hazards, drawing attention to the underlying principles and to some practical aspects of minimizing such hazards. This is followed by two sections: Section 1 provides detailed information on the hazardous properties of individual chemicals, either alone or in combination with other compounds; the entries in Section 2 are of two distinct types. The first type of entry gives general information on the hazardous behavior of some recognizably discrete classes or groups of the 4,600 or so individual compounds for which details are given in Section 1. The second type of entry concerns reactive hazard topics, techniques, or incidents which have a common theme or pattern of behavior involving compounds of several different groups, so that no common structural feature exists for the compounds involved.
Download or read book Guidelines for Chemical Reactivity Evaluation and Application to Process Design written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from international sources, this book provides principles and strategies for the evaluation of chemical reactions, and for using this information in process design and management. A useful resource for engineers who design, start-up, operate, and manage chemical and petrochemical plants, the book places special emphasis on the use of state-of-the-art technology in theory, testing methods, and applications in design and operations.
Download or read book Essential Practices for Managing Chemical Reactivity Hazards written by Robert W. Johnson and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its recent investigation of chemical reactivity accidents, the US Chemical Safety Board noted a gap in technical guidance and regulatory coverage. This volume closes the gap in technical guidance, helping small and large companies alike identify, address, and manage chemical reactivity hazards. It guides the reader through an analysis of the potential for chemical reactivity accidents to help prevent fires, explosions, toxic chemical releases or chemical spills. This volume is applicable to processes at any scale and is particularly useful for chemists, safety managers, and engineers involved in scale-up. An enclosed CD-ROM provides portable checklists, analysis tools, and a list of additional references. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2013-10-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
Download or read book Safety of Reactive Chemicals written by Tadao Yoshida and published by . This book was released on 1987 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire and Explosion Hazards Handbook of Industrial Chemicals written by Nicholas P. Cheremisinoff and published by Elsevier. This book was released on 2013-10-22 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook provides ready information on the fire and chemical reactivity of commonly used chemicals. Its purpose is to provide basic information important to the safe handling of chemicals and to help provide guidance in responding to a hazardous materials incident, in particular, incidents involving reactive chemicals and materials posing fire and explosion hazards. The volume has been written for chemical handling specialists, first responders to hazardous materials incidents, and firefighters. The basic definition used for a hazard materials incident is any situation that may potentially lead to catastrophic fire or explosion, and or human exposed to a toxic chemical. This situation may result from a spill of a hazardous material, a leak from a storage vessel or shipping container, or the mixing of incompatible chemicals whereby a chemical reaction could occur resulting in the release of energy and generation of toxic and perhaps flammable by-products. The volume provides chemical specific information, providing the reader with rigorous information on the chemical of interest.This book is a compendium of chemical specific fire and chemical reactivity data and information. More than 1,000 chemicals have been researched and organized into a reference handbook for fire specialists, chemical handling specialists, and plant safety engineers. The specific information provided for chemicals includes the flammability characteristics, recommended fire extinguishing practices, fire extinguishing agents not to be used, behavior in fires, burning characteristics, chemical reactivity with regard to water and common materials, incompatible chemical mixtures, containment and neutralization methods for spills. This reference book has been designed as a data bank for the hazardous materials handling specialist and industrial safety managers dealing with large chemical inventories. It is intended to be used by fire and loss prevention specialists and as a basis for developing procedures for safe storing and handling of chemicals. The authors have included an extensive physical properties section on chemicals, with information most pertinent to fire response situations.
Download or read book Inorganic Syntheses Volume 33 written by and published by John Wiley & Sons. This book was released on 2004-08-04 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Inorganic Syntheses series provides inorganic chemists with detailed and foolproof procedures for the preparation of important and timely compounds. Volume 33 includes provocative contributions on syntheses of selected supramolecules, useful reagents/ligands, solid state materials/clusters, and other compounds of general interest.
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 1995-09-16 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume updates and combines two National Academy Press bestsellers--Prudent Practices for Handling Hazardous Chemicals in Laboratories and Prudent Practices for Disposal of Chemicals from Laboratories--which have served for more than a decade as leading sources of chemical safety guidelines for the laboratory. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices for Safety in Laboratories provides step-by-step planning procedures for handling, storage, and disposal of chemicals. The volume explores the current culture of laboratory safety and provides an updated guide to federal regulations. Organized around a recommended workflow protocol for experiments, the book offers prudent practices designed to promote safety and it includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices for Safety in Laboratories is essential reading for people working with laboratory chemicals: research chemists, technicians, safety officers, chemistry educators, and students.
Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.
Download or read book Hazardous Chemicals written by T.S.S. Dikshith and published by CRC Press. This book was released on 2013-05-06 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: An easily accessible guide to scientific information, Hazardous Chemicals: Safety Management and Global Regulations covers proper management, precautions, and related global regulations on the safety management of chemical substances. The book helps workers and safety personnel prevent and minimize the consequences of catastrophic releases of toxic, reactive, flammable, or explosive chemical substances, which often result in toxic or explosive hazards. It also details safety measures for transportation of chemical substances by different routes, such as by road, rail, air, and sea. Discusses different aspects of potentially toxic and hazardous chemicals in simple and comprehensive language Provides toxicity and health effects of chemicals in simple, nontechnical language Covers scientific information on hazardous and potentially dangerous chemical substances at workplaces Offers fundamental knowledge about the biological and health effects of hazardous and potentially toxic chemicals in a comprehensive way Includes recent developments on safety management of hazardous and potentially toxic chemicals and related global regulations The author discusses the importance of knowledge in avoiding negligence during the use and handling of hazardous chemical substances. He stresses the importance of proper management and judicious application of each chemical substance irrespective of the workplace and eventually shows how safety and protection of the user, workplace, and the living environment can be achieved.
Download or read book Safety of Reactive Chemicals and Pyrotechnics written by Y. Wada and published by Elsevier. This book was released on 1995-11-20 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents involving reactive chemicals can often be prevented, or their effects alleviated, if those handling them have a sound knowledge both of their hazardous properties and of appropriate handling methods. This book addresses this need.It opens with a definition of the key technical terms and evaluation methods for hazardous materials are outlined. Chapter 2 covers accidents involving self-reactive substances, accidents occurring during chemical reactions, and accidents involving hazardous products in the event of an earthquake. In the next three chapters, methods for evaluating fire and explosion hazards of reactive substances are covered. The test methods described include DSC test using a sealed cell, impact sensitivity tests, the ignitability test, burning tests, the pyrolytic severity test, and shock sensitivity tests. Recently, the Japanese Fire Services Law was amended, requiring hazardous materials to be evaluated and classified by appropriate tests. These test methods, described in chapter 4, are related to oxidising solids, combustible solids, spontaneous ignition substances, and water-reactive substances. The final chapter gives examples of the safety assessment of various pyrotechnics.There are few books available on this subject and none so comprehensive. Each of the methods described is practical, effective and of low cost; and many of the application results are from the author's own laboratory. The book will be invaluable to those in public and industrial safety laboratories, R & D chemical laboratories, Fire Departments, explosives manufacturers, and those responsible for the transportation of hazardous materials.
Download or read book Chemical Reaction Hazards written by Katherine Barton and published by Elsevier. This book was released on 1997-02-27 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition of a best-selling book continues to provide a basis for the identification and evaluation of chemical reaction hazards for chemists, engineers, plant personnel, and students. Before undertaking the design of a chemical manufacturing process it is vital that the chemical reactions involved be fully understood, potential hazards assessed, and safety measures planned. Chemical Reaction Hazards aims to help the people responsible for this design and operation to meet the general duties of safety. Two major additions to this revised book are the appendices. One of these describes 100 incidents, illustrating their cause and indicating consequences if appropriate procedures within this guide are not followed. The second provides a practical example of a typical chemical reaction hazard assessment, from consideration of the process description, through experimental testing to the specification of safety measures.
Download or read book Chemical Laboratory Safety and Security written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-07 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.
Download or read book Safe Science written by National Research Council and published by National Academies Press. This book was released on 2014-10-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent serious and sometimes fatal accidents in chemical research laboratories at United States universities have driven government agencies, professional societies, industries, and universities themselves to examine the culture of safety in research laboratories. These incidents have triggered a broader discussion of how serious incidents can be prevented in the future and how best to train researchers and emergency personnel to respond appropriately when incidents do occur. As the priority placed on safety increases, many institutions have expressed a desire to go beyond simple compliance with regulations to work toward fostering a strong, positive safety culture: affirming a constant commitment to safety throughout their institutions, while integrating safety as an essential element in the daily work of laboratory researchers. Safe Science takes on this challenge. This report examines the culture of safety in research institutions and makes recommendations for university leadership, laboratory researchers, and environmental health and safety professionals to support safety as a core value of their institutions. The report discusses ways to fulfill that commitment through prioritizing funding for safety equipment and training, as well as making safety an ongoing operational priority. A strong, positive safety culture arises not because of a set of rules but because of a constant commitment to safety throughout an organization. Such a culture supports the free exchange of safety information, emphasizes learning and improvement, and assigns greater importance to solving problems than to placing blame. High importance is assigned to safety at all times, not just when it is convenient or does not threaten personal or institutional productivity goals. Safe Science will be a guide to make the changes needed at all levels to protect students, researchers, and staff.
Download or read book Handbook of Loss Prevention Engineering written by Joel M. Haight and published by John Wiley & Sons. This book was released on 2013-03-19 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loss prevention engineering describes all activities intended to help organizations in any industry to prevent loss, whether it be through injury, fire, explosion, toxic release, natural disaster, terrorism or other security threats. Compared to process safety, which only focusses on preventing loss in the process industry, this is a much broader field. Here is the only one-stop source for loss prevention principles, policies, practices, programs and methodology presented from an engineering vantage point. As such, this handbook discusses the engineering needs for manufacturing, construction, mining, defense, health care, transportation and quantification, covering the topics to a depth that allows for their functional use while providing additional references should more information be required. The reference nature of the book allows any engineers or other professionals in charge of safety concerns to find the information needed to complete their analysis, project, process, or design.
