Download or read book Safety in the Chemistry and Biochemistry Laboratory written by André Picot and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical and biochemical Laboratories are full of potentially dangerous chemicals and equipment. 'Safety in the Chemistry and Biochemistry Laboratory' provides the necessary information needed for working with these chemicals and apparatus to avoid: fires, explosions, toxic fumes, skin burns, poisoning and other hazards. Both authors, André Picot and Philippe Grenouillet, are recognized authorities in the field of lab safety, and their book arrange the information not available in similar publications. It is addressed to members of Chemical Health& Safety as well as working chemists in labs everywhere. Also Lab managers will find the book a useful addition to their bookshelf.
Download or read book Safety in the Chemistry and Biochemistry Laboratory written by Picot A. and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety in the Chemistry and Biochemistry Laboratory written by Andre Picot and published by . This book was released on 1996-12-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides knowledge and models of good practice needed by students to work safely in the laboratory as they progress through four years of undergraduate laboratory work Aligns with the revised safety instruction requirements from the ACS Committee on Professional Training 2015 “Guidelines and Evaluation Procedures for Bachelor’s Degree Programs” Provides a systematic approach to incorporating safety and health into the chemistry curriculum Topics are divided into layers of progressively more advanced and appropriate safety issues so that some topics are covered 2-3 times, at increasing levels of depth Develops a strong safety ethic by continuous reinforcement of safety; to recognize, assess, and manage laboratory hazards; and to plan for response to laboratory emergencies Covers a thorough exposure to chemical health and safety so that students will have the proper education and training when they enter the workforce or graduate school
Download or read book Improving Safety in the Chemical Laboratory written by Jay A. Young and published by Wiley-Interscience. This book was released on 1987 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume provides much-needed practical information for setting up and operating a safe chemical laboratory. The reader will learn to discern whether close calls or non-events have happened, and how to identify and eliminate their causes. The book consists of five chapters. Chapter 1 covers organization for safety in laboratories. Chapter 2 describes precautionary labels, including OSHA, DOT, and other labeling systems, and material safety data sheets. Discussed in chapter 3 is the training and drill of staff, along with a selected bibliography. Chapter 4 covers the physical layout of the laboratory, including protective equipment, communication, ventilation, electrical hazards, storage, and emergencies. The last chapter rounds out the subject of accident prevention with a description of safety inspections and safety audits. Also contained are very extensive appendixes.
Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2011-09-21 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...this substantial and engaging text offers a wealth of practical (in every sense of the word) advice...Every undergraduate laboratory, and, ideally, every undergraduate chemist, should have a copy of what is by some distance the best book I have seen on safety in the undergraduate laboratory." Chemistry World, March 2011 Laboratory Safety for Chemistry Students is uniquely designed to accompany students throughout their four-year undergraduate education and beyond, progressively teaching them the skills and knowledge they need to learn their science and stay safe while working in any lab. This new principles-based approach treats lab safety as a distinct, essential discipline of chemistry, enabling you to instill and sustain a culture of safety among students. As students progress through the text, they’ll learn about laboratory and chemical hazards, about routes of exposure, about ways to manage these hazards, and about handling common laboratory emergencies. Most importantly, they’ll learn that it is very possible to safely use hazardous chemicals in the laboratory by applying safety principles that prevent and minimize exposures. Continuously Reinforces and Builds Safety Knowledge and Safety Culture Each of the book’s eight chapters is organized into three tiers of sections, with a variety of topics suited to beginning, intermediate, and advanced course levels. This enables your students to gather relevant safety information as they advance in their lab work. In some cases, individual topics are presented more than once, progressively building knowledge with new information that’s appropriate at different levels. A Better, Easier Way to Teach and Learn Lab Safety We all know that safety is of the utmost importance; however, instructors continue to struggle with finding ways to incorporate safety into their curricula. Laboratory Safety for Chemistry Students is the ideal solution: Each section can be treated as a pre-lab assignment, enabling you to easily incorporate lab safety into all your lab courses without building in additional teaching time. Sections begin with a preview, a quote, and a brief description of a laboratory incident that illustrates the importance of the topic. References at the end of each section guide your students to the latest print and web resources. Students will also find “Chemical Connections” that illustrate how chemical principles apply to laboratory safety and “Special Topics” that amplify certain sections by exploring additional, relevant safety issues. Visit the companion site at http://userpages.wittenberg.edu/dfinster/LSCS/.
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
Download or read book Chemical Laboratory Safety and Security written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-07 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.
Download or read book Safe Science written by National Research Council and published by National Academies Press. This book was released on 2014-10-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent serious and sometimes fatal accidents in chemical research laboratories at United States universities have driven government agencies, professional societies, industries, and universities themselves to examine the culture of safety in research laboratories. These incidents have triggered a broader discussion of how serious incidents can be prevented in the future and how best to train researchers and emergency personnel to respond appropriately when incidents do occur. As the priority placed on safety increases, many institutions have expressed a desire to go beyond simple compliance with regulations to work toward fostering a strong, positive safety culture: affirming a constant commitment to safety throughout their institutions, while integrating safety as an essential element in the daily work of laboratory researchers. Safe Science takes on this challenge. This report examines the culture of safety in research institutions and makes recommendations for university leadership, laboratory researchers, and environmental health and safety professionals to support safety as a core value of their institutions. The report discusses ways to fulfill that commitment through prioritizing funding for safety equipment and training, as well as making safety an ongoing operational priority. A strong, positive safety culture arises not because of a set of rules but because of a constant commitment to safety throughout an organization. Such a culture supports the free exchange of safety information, emphasizes learning and improvement, and assigns greater importance to solving problems than to placing blame. High importance is assigned to safety at all times, not just when it is convenient or does not threaten personal or institutional productivity goals. Safe Science will be a guide to make the changes needed at all levels to protect students, researchers, and staff.
Download or read book Safety in the Chemistry and Biochemistry Laborator Y written by Picot and published by . This book was released on 1997-02-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improving Safety in the Chemical Laboratory written by Jay A. Young and published by Wiley-Interscience. This book was released on 1991-06-26 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work of accident prevention in the lab begins with foresight. Discerning "close calls"—near accidents—early enough prevents them from turning into full-fledged mishaps, mishaps that cost time and money, and which could result in injury. Improving Safety in the Chemical Laboratory is an accident prevention handbook for the professional in the lab that shows how to detect and eliminate the causes of dangerous mishaps—and virtually "hazard proof" any lab environment. In unequivocally clear and practical terms, Improving Safety in the Chemical Laboratory, Second Edition offers detailed procedures—from precautionary labeling to simulated drills, safety inspections,and the preparation of a chemical hygiene plan—for the development of a safety-enhanced workplace. Reflecting, in part, the upgraded procedures now mandated by the OSHA Laboratory Standard in the USA, as well as the WHMIS regulations in Canada and the COSHH regulations in the United Kingdom, this newest edition offers unparalleled and up-to-date guidance on the fine points of hazard control, with new added material on managing and handling especially hazardous substances and personal protective equipment: The 95 percent solution: the list of causes of laboratory accidents Hazard categories: unsafe acts; unsafe conditions Selecting and maintaining personal protective conditions Accident handling Classes of fuels and fires Preventing and extinguishing fires Toxic effects of chemicals Recognition of and treatment for exposure Chemical specific safety protocol Storage of lab chemicals Safe disposal of hazardous waste Personal protective equipment in the laboratory Improving hood performance Designing safety into new or renovated laboratories A comprehensive, one-volume safety seminar, Improving Safety in the Chemical Laboratory will provide indispensable guidance to lab supervisors and workers, teachers and students, and anyone involved in the investigation of chemical accidents and injury. In clear language that quickly details the full range of hidden—and avoidable—laboratory hazards, Improving Safety in the Chemical Laboratory, Second Edition offers the most up-to-date, practical, and easy-to-implement lab safety regimen yet available.
Download or read book Laboratory Safety Theory and Practice written by Anthony Fuscaldo and published by Elsevier. This book was released on 2012-12-02 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory Safety: Theory and Practice focuses on theoretical aspects of the hazards the students, technicians, and scientists encounter in the laboratory. It presents methods of risk assessment that can be applied to technologies as they are translated from the scientist's mind to the laboratory bench. It is organized into three sections designated as General Laboratory Safety, Biological Laboratory Safety, and Medical and Psychological Factors. The first section, encompassing three chapters, discusses hazards found in almost all laboratories; pertinent safety theories and practices; ubiquitous compounds that are either toxic or carcinogenic and guidelines for their use; and radiation hazards. Chapters 4 to 7 focus on the safety in the biological laboratory. Discussions on relatively complex group of viruses, approach to recombinant DNA research, and awareness on the possible hazards associated with the field are included in this book. Chapters 6 and 7 present design and function of biohazard laboratories and the hazards relating to laboratory animals. The final section discusses medical surveillance of persons at risk and the psychological factors involved in accident control. It presents a comprehensive list of chemical agents, their sources, subsequent physical effects, and the accepted mode of medical surveillance. Various genetic screening tests and their potential use for the evaluation of presumptive and actual mutagens are also covered. This book is ideal for safety and design engineers, students, technicians, and scientists.
Download or read book Manual of Laboratory Safety written by Najat Rashid and published by Jaypee Brothers Medical Publishers Pvt. Limited. This book was released on 2013-08-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a concise guide to medical laboratory safety in hospitals. Divided into five sections, it covers biosafety and biosecurity, chemical hazards, radioactive materials hazards, healthcare-associated infections and biocides, and waste management. The manual describes methods to prevent accidents, as well as measures that should be taken if they do occur. Safety measures suggested by the World Health Organisation (WHO) and Centres for Disease Control (CDC) are also included. Manual of Laboratory Safety is an invaluable, up to date reference guide for laboratory owners and technicians and includes images, illustrations and tables, to enhance learning. Key points Concise guide to medical laboratory safety in hospitals Covers all hazards including chemical and radioactive hazards, infections and waste management Includes safety measures suggested by the WHO and CDC Features images, illustrations and tables to enhance learning
Download or read book Safety scale Laboratory Experiments for General Organic and Biochemistry Third Edition written by Spencer L. Seager and published by . This book was released on 1998 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Laboratory Health and Safety Measures written by S.B. Pal and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past two decades, many books, governmental reports and regu lations on safety measures against chemieals, fire, microbiological and radioactive hazards in laboratories have been published from various coun tries. These topics have also been briefly discussed in books on laboratory planning and management. The application ofvarious scientific instruments based on different ionizing and non-ionizing radiations have brought new safety problems to the laboratory workers of today, irrespective of their scientific disciplines, be they medicine, natural or life sciences. However, no comprehensive laboratory handbook dealing with aIl these hazards, some of which are recently introduced, had so far been available in a single volume. Therefore, it was thought worthwhile to publish this Handbook on safety and health measures for laboratories, with contributions from several experts on these subjects. As this second edition of the Handbook, like the first edition, is a multiauthor volume, some duplication in conte nt among chapters is unavoidable in order to maintain the context of a chapter as weIl as make each chapter complete. An attempt has also been made to maintain the central theme, which is how to work in a laboratory with maximum possible environmental safety.
Download or read book Safety Scale Laboratory Experiments written by Spencer L. Seager and published by Cengage Learning. This book was released on 2016-12-05 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proven lab manual offers a unique blend of laboratory skills and exercises that effectively illustrate concepts from the main text, CHEMISTRY FOR TODAY: GENERAL, ORGANIC, AND BIOCHEMISTRY, 8th and 9th Editions. The book's 15 general chemistry and 20 organic/biochemistry safety-scale laboratory experiments use small quantities of chemicals and emphasize safety and proper disposal of materials. 'Safety-scale' is the authors' own term for describing the amount of chemicals each lab experiment requires -- less than macroscale quantities, which are expensive and hazardous, and more than microscale quantities, which are difficult to work with and require special equipment. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book The Foundations of Laboratory Safety written by Stephen R. Rayburn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety is a word that has many connotations, of risk ofa possible accident that is acceptable conjuring up different meanings to different to one person· may not be acceptable to an people. What is safety? A scientist views safety other. This may be one reason why skydiving as a consideration in the design of an exper and mountain climbing are sports that are not iment. A manufacturing plant engineer looks as popular as are, say, boating or skiing. on safety as one of the necessary factors in But even activities that have high levels of developing a manufacturing process. A legis potential risk can be engaged in safely. How lator is likely to see safety as an important part can we minimize risks so that they decrease of an environmental law. A governmental ad to acceptable levels? We can do this by iden ministrator may consider various safety issues tifying sources of hazards and by assessing the when reviewing the environmental conse risks of accidents inherent to these hazards. quences of a proposed project. An attorney Most hazards that are faced in the laboratory may base a negligence suit on safety defects.
