Download or read book Safety in Laboratories written by and published by . This book was released on 1980 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safe Science written by National Research Council and published by National Academies Press. This book was released on 2014-10-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent serious and sometimes fatal accidents in chemical research laboratories at United States universities have driven government agencies, professional societies, industries, and universities themselves to examine the culture of safety in research laboratories. These incidents have triggered a broader discussion of how serious incidents can be prevented in the future and how best to train researchers and emergency personnel to respond appropriately when incidents do occur. As the priority placed on safety increases, many institutions have expressed a desire to go beyond simple compliance with regulations to work toward fostering a strong, positive safety culture: affirming a constant commitment to safety throughout their institutions, while integrating safety as an essential element in the daily work of laboratory researchers. Safe Science takes on this challenge. This report examines the culture of safety in research institutions and makes recommendations for university leadership, laboratory researchers, and environmental health and safety professionals to support safety as a core value of their institutions. The report discusses ways to fulfill that commitment through prioritizing funding for safety equipment and training, as well as making safety an ongoing operational priority. A strong, positive safety culture arises not because of a set of rules but because of a constant commitment to safety throughout an organization. Such a culture supports the free exchange of safety information, emphasizes learning and improvement, and assigns greater importance to solving problems than to placing blame. High importance is assigned to safety at all times, not just when it is convenient or does not threaten personal or institutional productivity goals. Safe Science will be a guide to make the changes needed at all levels to protect students, researchers, and staff.

Download or read book Biosafety in the Laboratory written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1989-01-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosafety in the Laboratory is a concise set of practical guidelines for handling and disposing of biohazardous material. The consensus of top experts in laboratory safety, this volume provides the information needed for immediate improvement of safety practices. It discusses high- and low-risk biological agents (including the highest-risk materials handled in labs today), presents the "seven basic rules of biosafety," addresses special issues such as the shipping of dangerous materials, covers waste disposal in detail, offers a checklist for administering laboratory safetyâ€"and more.

Download or read book Complete Guide to Laboratory Safety written by Terry Jo Gile and published by Hcpro, a Division of Simplify Compliance. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert compliance and training advice to build your lab safety program Now includes fully-searchable electronic version! The third edition of this popular resource makes training and compliance easier by consolidating regulations from all relevant agencies (OSHA, Joint Commission, CAP, CLSI, DOT, state health department). Included with your hard-copy is a searchable, hyperlinked PDF to allow quick access to specific regulations. Operate your lab in an efficient and safe manner with customizable policies and procedures, practical case studies, and expert advice from lab safety authority Terry Jo Gile. The Complete Guide to Lab Safety, 3rd Edition will help you: - Save time finding all lab safety regulations using the book and the searchable PDF - Avoid costly OSHA fines by building and maintaining a culture of safety - Protect lab employees from infectious diseases, bloodborne pathogens, and hazardous chemicals, using effective training techniques - Develop an efficient compliance program with customizable policies, procedures and checklists What's new in the 3rd Edition: - Fully searchable PDF, enabling users to quickly find standards, key requirements, and important lab safety topics - Fresh case studies and tools to reflect the current trends and outline proven solutions in lab safety - Guidance on new waste management and chemical hygiene standards - Lab-specific guidance for dealing with pandemic influenza Take a look at the Table of Contents - Chapter 1: The Law of Science and Laboratory Safety - Chapter 2: Managing Laboratory Safety - Chapter 3: Safe Work Practices - Chapter 4: Personal Protective Equipment - Chapter 5: Safety in Laboratory Design - Chapter 6: Ergonomics - Chapter 7: Hazard Communication - Chapter 8: Chemical Hygiene - Chapter 9: Bloodborne Pathogens and Infectious Disease - Chapter 10: Radiation Safety - Chapter 11: Fire Safety - Chapter 12: Electrical Safety - Chapter 13: Safe Use of Compressed Gases - Chapter 14: Special Safety Requirements for Anatomic Pathology Laboratories - Chapter 15: Safe Transport of Specimens - Chapter 16: Training - Appendix 1: Model Laboratory Safety Manual - Appendix 2: Checklist for Annual Safety Audit - Appendix 3: Glossary

Download or read book Chemical Safety in the Laboratory written by Stephen K. Hall and published by CRC Press. This book was released on 2018-12-19 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing is more important to an organization than the health and safety of its workers. The managerial effectiveness of any health and safety program is judged on the basis of how well it prevents injuries and ill health. Chemical Safety in the Laboratory provides a proven approach to implementing and maintaining an effective chemical safety program for laboratories in hospital, industrial, and educational settings. Based on 20 years of experience managing and auditing chemical safety programs, the author discusses the OSHA Laboratory Standard and the Chemical Hygiene Plan, provides guidelines for the effective use of personal protective equipment, and details chemical emergency planning and response procedures. He also outlines a 19-step decontamination procedure for emergency responders. Employee chemical exposure monitoring and victim handling procedures are among the other major topics covered in this essential guide.

Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.

Download or read book CRC Handbook of Laboratory Safety 5th Edition written by A. Keith Furr and published by CRC Press. This book was released on 2000-04-12 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and updated, The CRC Handbook of Laboratory Safety, Fifth Edition provides information on planning and building a facility, developing an organization infrastructure, planning for emergencies and contingencies, choosing the correct equipment, developing operational plans, and meeting regulatory requirements. Still the essential reference tool, the New Edition helps you organize your safety efforts to adhere to the latest regulations and use the newest technology. Thoroughly revised, the CRC Handbook of Laboratory Safety, Fifth Edition includes new OSHA laboratory safety standards, the 1994 NRC radiation safety standards, guidelines for X-ray use in hospitals, enforcement of standards for dealing with blood-borne pathogens, OSHA actions covering hazardous waste operations and emergency response, and the latest CDC guidelines for research with microbial hazards. Every word on every page has been scrutinized, and literally hundreds of changes have been made to bring the material up to date. See what's new in the New Edition New figures and tables illustrating the new material Internet references in addition to journal articles Changes in the Clean Air Act regarding incineration of hospital, medical, and infectious waste Obsolete articles removed and replaced - over one hundred pages of new material New information on respiratory protection guidelines

Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2011-09-21 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...this substantial and engaging text offers a wealth of practical (in every sense of the word) advice...Every undergraduate laboratory, and, ideally, every undergraduate chemist, should have a copy of what is by some distance the best book I have seen on safety in the undergraduate laboratory." Chemistry World, March 2011 Laboratory Safety for Chemistry Students is uniquely designed to accompany students throughout their four-year undergraduate education and beyond, progressively teaching them the skills and knowledge they need to learn their science and stay safe while working in any lab. This new principles-based approach treats lab safety as a distinct, essential discipline of chemistry, enabling you to instill and sustain a culture of safety among students. As students progress through the text, they’ll learn about laboratory and chemical hazards, about routes of exposure, about ways to manage these hazards, and about handling common laboratory emergencies. Most importantly, they’ll learn that it is very possible to safely use hazardous chemicals in the laboratory by applying safety principles that prevent and minimize exposures. Continuously Reinforces and Builds Safety Knowledge and Safety Culture Each of the book’s eight chapters is organized into three tiers of sections, with a variety of topics suited to beginning, intermediate, and advanced course levels. This enables your students to gather relevant safety information as they advance in their lab work. In some cases, individual topics are presented more than once, progressively building knowledge with new information that’s appropriate at different levels. A Better, Easier Way to Teach and Learn Lab Safety We all know that safety is of the utmost importance; however, instructors continue to struggle with finding ways to incorporate safety into their curricula. Laboratory Safety for Chemistry Students is the ideal solution: Each section can be treated as a pre-lab assignment, enabling you to easily incorporate lab safety into all your lab courses without building in additional teaching time. Sections begin with a preview, a quote, and a brief description of a laboratory incident that illustrates the importance of the topic. References at the end of each section guide your students to the latest print and web resources. Students will also find “Chemical Connections” that illustrate how chemical principles apply to laboratory safety and “Special Topics” that amplify certain sections by exploring additional, relevant safety issues. Visit the companion site at http://userpages.wittenberg.edu/dfinster/LSCS/.

Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 1995-09-16 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume updates and combines two National Academy Press bestsellers--Prudent Practices for Handling Hazardous Chemicals in Laboratories and Prudent Practices for Disposal of Chemicals from Laboratories--which have served for more than a decade as leading sources of chemical safety guidelines for the laboratory. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices for Safety in Laboratories provides step-by-step planning procedures for handling, storage, and disposal of chemicals. The volume explores the current culture of laboratory safety and provides an updated guide to federal regulations. Organized around a recommended workflow protocol for experiments, the book offers prudent practices designed to promote safety and it includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices for Safety in Laboratories is essential reading for people working with laboratory chemicals: research chemists, technicians, safety officers, chemistry educators, and students.

Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides knowledge and models of good practice needed by students to work safely in the laboratory as they progress through four years of undergraduate laboratory work Aligns with the revised safety instruction requirements from the ACS Committee on Professional Training 2015 “Guidelines and Evaluation Procedures for Bachelor’s Degree Programs” Provides a systematic approach to incorporating safety and health into the chemistry curriculum Topics are divided into layers of progressively more advanced and appropriate safety issues so that some topics are covered 2-3 times, at increasing levels of depth Develops a strong safety ethic by continuous reinforcement of safety; to recognize, assess, and manage laboratory hazards; and to plan for response to laboratory emergencies Covers a thorough exposure to chemical health and safety so that students will have the proper education and training when they enter the workforce or graduate school

Download or read book The Sustainable Laboratory Handbook written by Egbert Dittrich and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive guide to modern laboratory planning in ten years to address both construction and operating aspects. Many of the 30 authors are affiliated with the European Association for Sustainable Laboratory Technologies (EGNATON), which has also endorsed this ready reference. This expert team covers the entire lifecycle of a laboratory facility, starting with the site layout and the planning of the building, followed by the planning of such areas as housing for laboratory animals, clean rooms and production facilities. The next section of the book deals with the installation of laboratory equipment, including storage and emergency facilities, while the final parts address safety and sustainability standards applicable to laboratories, as well as facility management and optimization during normal laboratory operation. The relevant norms and standards are cited throughout, and examples from recent construction sites are also presented. Hundreds of photographs and drawings, many in full color, provide visual examples of the design and building concepts. As a result, readers will learn how to construct and maintain efficient and long-serving laboratory spaces with a minimum of maintenance costs and a maximum of safety. An invaluable, practical guide for planners, builders and managers of chemical, biological and medical research laboratories of any size.

Download or read book Laboratory Safety Guidance written by United States. Occupational Safety and Health Administration and published by . This book was released on 2011 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safe Work Practices for the Environmental Laboratory written by Frank R. Spellman and published by CRC Press. This book was released on 1998-10-02 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make your environmental lab--and lab technicians' work practices--the safest possible. * Protect workers from hazardous material they handle on-site * Protect the civilian population from harm in a hazardous materials emergency * Prevent accidents before they happen The purpose of Safe Work Practices for the Environmental Laboratory is twofold: 1. For the person designated as the laboratory's Chemical Hygiene Officer or Safety Officer, this text is a user friendly reference that will provide a format, a template, a guide to compliance with OSHA's Laboratory Standard (29 CFR 1910.145); and 2. for the person who is assigned to work in the environmental laboratory, this user-friendly text provides the information needed not only to perform routine laboratory tasks correctly, but also to perform them safely. The environmental lab is involved with performing analytical testing and sampling protocols relating to air, soil, biosolids, sludges, drinking water, wastewater, groundwater, stormwater, waste characterization, petroleum products, and HRSD/NPDES effluent studies. Many wastewater treatment plants and water works have their own environmental laboratories. These labs primarily perform analysis of process conditions to ensure optimization of the process. However, even these small labs (a few are quite large) perform "environmental sampling" and therefore are environmental labs. The actual genesis of the environmental laboratory can be attributed to the environmental regulations that have been generated by USEPA, AOAC, ASTM, NIOSH, OSHA, and other regulatory and advisory entities. The typical environmental laboratory contains several different types of hazards the lab worker must guard against. This is the case even though modern environmental laboratories have been designed to take maximum advantage of engineering controls that work to "engineer-out" most hazards. The main hazard discussed in this text has to do with hazardous materials--dangerous chemicals and compounds--and the effect they can have on work practices. OSHA is quite specific in regard to protecting the laboratory worker from harm that could result from handling hazardous materials--these specifics are discussed in detail throughout this text. It is important to point out that this text will provide the user with more than just a "safety book." For example, this text provides the user with a sample Chemical Hygiene Plan, it discusses various safe work practices for standard operating procedures normally performed in the environmental laboratory, and it discusses procedures to use for emergency response activities, such as clean-up of chemical spills. The bottom line is that probably the most important benefit to be derived from using this text is the exposure the user receives to the lessons and examples presented throughout the text; these lessons learned and examples provide information on how to make your environmental laboratory and the performance of your individual work practices safer. When you get right down to it, isn't this what a safety text should be all about?

Download or read book Chemical Laboratory Safety and Security written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-07 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.

Download or read book The Foundations of Laboratory Safety written by Stephen R. Rayburn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety is a word that has many connotations, of risk ofa possible accident that is acceptable conjuring up different meanings to different to one person· may not be acceptable to an people. What is safety? A scientist views safety other. This may be one reason why skydiving as a consideration in the design of an exper and mountain climbing are sports that are not iment. A manufacturing plant engineer looks as popular as are, say, boating or skiing. on safety as one of the necessary factors in But even activities that have high levels of developing a manufacturing process. A legis potential risk can be engaged in safely. How lator is likely to see safety as an important part can we minimize risks so that they decrease of an environmental law. A governmental ad to acceptable levels? We can do this by iden ministrator may consider various safety issues tifying sources of hazards and by assessing the when reviewing the environmental conse risks of accidents inherent to these hazards. quences of a proposed project. An attorney Most hazards that are faced in the laboratory may base a negligence suit on safety defects.

Download or read book Handbook of Laboratory Health and Safety Measures written by S.B. Pal and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past two decades, many books, governmental reports and regu lations on safety measures against chemieals, fire, microbiological and radioactive hazards in laboratories have been published from various coun tries. These topics have also been briefly discussed in books on laboratory planning and management. The application ofvarious scientific instruments based on different ionizing and non-ionizing radiations have brought new safety problems to the laboratory workers of today, irrespective of their scientific disciplines, be they medicine, natural or life sciences. However, no comprehensive laboratory handbook dealing with aIl these hazards, some of which are recently introduced, had so far been available in a single volume. Therefore, it was thought worthwhile to publish this Handbook on safety and health measures for laboratories, with contributions from several experts on these subjects. As this second edition of the Handbook, like the first edition, is a multiauthor volume, some duplication in conte nt among chapters is unavoidable in order to maintain the context of a chapter as weIl as make each chapter complete. An attempt has also been made to maintain the central theme, which is how to work in a laboratory with maximum possible environmental safety.

Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).