Download or read book Guidance for the Design and Application of Shoulder and Centerline Rumble Strips written by Darren J. Torbic and published by Transportation Research Board. This book was released on 2009 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides guidance for the design and application of shoulder and centerline rumble strips as an effective crash reduction measure, while minimizing adverse effects for motorcyclists, bicyclists, and nearby residents. Using the results of previous studies and the research conducted under this project, safety effectiveness estimates were developed for shoulder rumble strips on rural freeways and rural two-lane roads and for centerline rumble strips on rural and urban two-lane roads.
Download or read book Centerline Rumble Strips written by Eugene Russell and published by Transportation Research Board. This book was released on 2005 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 339: Centerline Rumble Strips (CLRS) examines current design, installation, configuration, dimension, and visibility issues associated with CLRS. The report addresses the need for guidance on warrants, benefits, successful practices, and concerns such as external noise and the reduced visibility of centerline striping material. Also addressed are pavement deterioration, ice buildup in the grooves, adverse impact on emergency vehicles, and the effect of CLRS on bicyclists. Particular attention was paid to available before-and-after CLRS installation crash data to document the safety aspects of CLRS and the availability of policies, guidelines, warrants, and costs regarding their use and design.
Download or read book NCHRP Report 641 written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centerline Rumble Strips written by and published by . This book was released on 2005 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Evaluation of Centerline Rumble Strips written by David A. Noyce and published by . This book was released on 2003 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigating Safety Effectiveness of Centerline Rumble Strips on Rural Two lane Roads in Louisiana with Empirical Bayes Method written by M. Ashifur Rahman and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Evaluation of Permanent Raised Pavement Markers written by Geni Brafman Bahar and published by Transportation Research Board. This book was released on 2004 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's National Cooperative Highway Research Program (NCHRP) Report 518: Safety Evaluation of Permanent Raised Pavement Markers examines the safety performance of snowplowable permanent raised pavement markers on two-lane roadways and four-lane freeways"--Publisher's description.
Download or read book NCHRP Report 641 written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Handbook of Road Safety Measures written by Rune Elvik and published by Emerald Group Publishing. This book was released on 2009-10-14 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains summaries of the knowledge regarding the effects of 128 road safety measures. This title covers various areas of road safety including: traffic control; vehicle inspection; driver training; publicity campaigns; police enforcement; and, general policy instruments. It also covers topics such as post-accident care, and speed cameras.
Download or read book Highway Safety Review written by United States. Federal Highway Administration. Safety Review Task Force and published by . This book was released on 1978 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reducing Crossover Accidents on Kansas Highways Using Milled Centerline Rumble Strips written by Eugene Russell and published by . This book was released on 2006 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: KSU surveyed U.S. and Canadian provinces and found no serious negative problems with centerline rumble strips (CLRS) and recommended that they be field tested. KSU field tested several patterns of rumble strips, i.e., varying width and spacing. After selecting the best patterns, KDOT installed about 15 mi of two patterns of on the centerline of a two-lane state highway. This K-TRAN report summarizes the findings of safety benefits and non-benefits from this nationwide survey. It describes research on the Kansas test patterns leading to recommendations on the best patterns, and the results and conclusions of field testing of these patterns regarding drivers' acceptance and perceived benefits of CLRS.
Download or read book Traffic Engineering Handbook written by ITE (Institute of Transportation Engineers) and published by John Wiley & Sons. This book was released on 2016-01-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get a complete look into modern traffic engineering solutions Traffic Engineering Handbook, Seventh Edition is a newly revised text that builds upon the reputation as the go-to source of essential traffic engineering solutions that this book has maintained for the past 70 years. The updated content reflects changes in key industry standards, and shines a spotlight on the needs of all users, the design of context-sensitive roadways, and the development of more sustainable transportation solutions. Additionally, this resource features a new organizational structure that promotes a more functionally-driven, multimodal approach to planning, designing, and implementing transportation solutions. A branch of civil engineering, traffic engineering concerns the safe and efficient movement of people and goods along roadways. Traffic flow, road geometry, sidewalks, crosswalks, cycle facilities, shared lane markings, traffic signs, traffic lights, and more—all of these elements must be considered when designing public and private sector transportation solutions. Explore the fundamental concepts of traffic engineering as they relate to operation, design, and management Access updated content that reflects changes in key industry-leading resources, such as the Highway Capacity Manual (HCM), Manual on Uniform Traffic Control Devices (MUTCD), AASSHTO Policy on Geometric Design, Highway Safety Manual (HSM), and Americans with Disabilities Act Understand the current state of the traffic engineering field Leverage revised information that homes in on the key topics most relevant to traffic engineering in today's world, such as context-sensitive roadways and sustainable transportation solutions Traffic Engineering Handbook, Seventh Edition is an essential text for public and private sector transportation practitioners, transportation decision makers, public officials, and even upper-level undergraduate and graduate students who are studying transportation engineering.
Download or read book Integrated Safety Management Process written by Geni Bahar and published by Transportation Research Board. This book was released on 2003 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rising awareness of and increased attention to sexual harassment has resulted in momentum to implement sexual harassment prevention efforts in higher education institutions. Work on preventing sexual harassment is an area that has recently garnered a lot of attention, especially around education and programs that go beyond the standard anti-sexual harassment trainings often used to comply with legal requirements. On April 20-21, 2021, the National Academies of Sciences, Engineering, and Medicine hosted the workshop Developing Evaluation Metrics for Sexual Harassment Prevention Efforts. The workshop explored approaches and strategies for evaluating and measuring the effectiveness of sexual harassment interventions being implemented at higher education institutions and research and training sites, in order to assist institutions in transforming promising ideas into evidence-based best practices. Workshop participants also addressed methods, metrics, and measures that could be used to evaluate sexual harassment prevention efforts that lead to change in the organizational climate and culture and/or a change in behavior among community members. This publication summarizes the presentations and discussion of the workshop.
Download or read book Roadside Design Guide written by American Association of State Highway and Transportation Officials. Task Force for Roadside Safety and published by . This book was released on 1989 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Using Centerline Rumble Strips in Virginia written by Chung S. Chen and published by . This book was released on 2005 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the wide and successful use of continuous shoulder rumble strips, many state departments of transportations (DOTs) installed centerline rumble strips (CLRS) on rural two-lane and undivided multilane highways in an effort to reduce cross-over-the-centerline (COCL) crashes. COCL crashes include head-on, sideswipe opposite direction, fixed object run-off-the-road left, and non-collision. The purpose of this research was to develop guidelines for using CLRS in Virginia based on a review of best practices and the analysis of Virginia COCL crash data from 2001 through 2003. The analysis procedures included data query and analyses of crash frequency, density, and rate. Areas and route locations with the highest COCL crashes and densities were identified as potential candidate sites for CLRS. As of 2003, 24 state DOTs and two Canadian provinces were using CLRS. They are generally installed on a case-by-case basis. CLRS design patterns vary greatly among states, but the most commonly used types are continuous grooves 12 to 16 inches in length, 6 to 7 inches in width, and 0.5 inch in depth spaced 12 or 24 inches apart. The optimal CLRS patterns remain unknown. Data analyses revealed that the distribution of COCL crashes in Virginia varied significantly with roadway system, road type, jurisdictional area, and road location. The statewide COCL crash densities were 0.13 and 0.71 crash per mile for secondary and primary roads, respectively. Fixed object run-off-the-road left was the predominant type of COCL crash followed by sideswipe opposite direction and head-on for undivided roads. The crash density of the primary system was 4.5 times higher than that of the secondary system. Guidelines were developed that outline the application of CLRS, design dimensions, installation and maintenance, and other issues. The authors recommend that the Virginia Department of Transportation's Traffic Engineering Division implement the guidelines as a division memorandum. Although a benefit-cost ratio for this recommendation will vary with each site, a sample estimated benefit-cost ratio was at least 7.6 per mile.
Download or read book Roundabouts written by Lee August Rodegerdts and published by Transportation Research Board. This book was released on 2010 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.
Download or read book Use of Rumble Strips to Enhance Safety written by Douglas W. Harwood and published by . This book was released on 1993 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to traffic engineers, highway design engineers, highway maintenance personnel, those responsible for toll plaza design and operation, and others concerned with the operation, safety and design of the roadway environment. Information is presented on the various applications of rumble strips on the traveled way and on highway shoulders. This synthesis describes the state of the practice with respect to placement, operational and safety effects, design, installation, and cost and service life of rumble strips. This report of the Transportation Research Board also discusses the effectiveness of rumble strips in preventing or reducing accidents. It provides information on the potential adverse effects of rumble strips, such as noise, motorist use of opposing lanes to avoid rumble strips, maintenance problems, and concerns of special users such as senior citizens, bikers, and truckers. The need for signing and public information support are also discussed. The synthesis presents several recommendations for future research.
