Download or read book Safety Critical Systems The Convergence of High Tech and Human Factors written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety-critical systems, in the sense of software-based systems used in safety critical applications, are 'high-tech'. They are products of modern technology. Their effective, efficient and safe functioning depends not only on the devel opment of the right technologies but also on the right use of them. The safety of a system may be compromised not only by faults in the system but also by the use in the first place of an unreliable, unsafe, or unproved technology in its development. The key to the development and use of both technologies and systems is the human being. Until recently, the importance of human involvement, other than at the direct operational level, was hardly admitted. But now the unreliability of humans is recognised, as is the potential for latent faults to be introduced into systems at any point in their life cycles, by all who are in volved with them, including designers and strategic decision makers.

Download or read book Human Factors in Safety critical Systems written by Felix Redmill and published by Routledge. This book was released on 1997 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety-critical systems are found in almost every sector of industry. An understanding of the basis for the functioning of these systems is therefore vital to all involved in their operation. This book provides an overview of the whole subject

Download or read book Technology and Assessment of Safety Critical Systems written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: The programme for the Second Safety-critical Systems Symposium was planned to examine the various aspects of technology currently employed in the design of safety-critical systems, as well as to emphasise the importance of safety and risk management in their design and operation. assessment There is an even balance of contributions from academia and industry. Thus, industry is given the opportunity to express its views of the safety-critical domain and at the same time offered a glimpse of the technologies which are currently under development and which, if successful, will be available in the medium-term future. In the field of technology, a subject whose importance is increasingly being recognised is human factors, and there are papers on this from the University of Hertfordshire and Rolls-Royce. Increasingly, PLCs are being employed in safety-critical applications, and this domain is represented by contributions from Nuclear Electric and August Computers. Then there are papers on maintainability, Ada, reverse engineering, social issues, formal methods, and medical systems, all in the context of safety. And, of course, it is not possible to keep the 'new' technologies out of the safety-critical domain: there are papers on neural networks from the University of Exeter and knowledge-based systems from ERA Technology.

Download or read book Industrial Perspectives of Safety critical Systems written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 6th Safety-critical Systems Sympo sium, the theme of which is Industrial Perspectives. In accordance with the theme, all of the chapters have been contributed by authors having an industrial af filiation. The first two chapters reflect half-day tutorials - Managing a Safety-critical System Development Project and Principles of Safety Management - held on the first day of the event, and the following 15 are contributed by the presenters of papers on the next two days. Following the tutorials, the chapters fa~l into five sub-themes - the session titles at the Symposium. In the first of these, on 'Software Development Tech nology', Trevor Cockram and others report on the industrial application of a requirements traceability model, Paul Bennett on configuration management in safety-critical systems, and Brian Wichmann on Ada. The next 5 chapters are on 'Safety Management'. In the safety domain, the fundamental business of management is increasingly being addressed with respect not merely to getting things done, but also to controlling the processes by which they are done, the risks involved, and the need not only to achieve safety but to demonstrate that it has been achieved. In this context, Gustaf Myhrman reveals recent developments for safer systems in the Swedish De fence, and Shoky Visram reports on the management of safety within a large and complex Air Traffic Control project.

Download or read book A Practical Guide to Security Engineering and Information Assurance written by Debra S. Herrmann and published by CRC Press. This book was released on 2001-10-18 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today the vast majority of the world's information resides in, is derived from, and is exchanged among multiple automated systems. Critical decisions are made, and critical action is taken based on information from these systems. Therefore, the information must be accurate, correct, and timely, and be manipulated, stored, retrieved, and exchanged s

Download or read book Sensemaking in Safety Critical and Complex Situations written by Stig Ole Johnsen and published by CRC Press. This book was released on 2021-07-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensemaking in Safety Critical and Complex Situations: Human Factors and Design Human factors-based design that supports the strengths and weaknesses of humans are often missed during the concept and design of complex technical systems. With the focus on digitalization and automation, the human actor is often left out of the loop but needs to step in during safety-critical situations. This book describes how human factors and sensemaking can be used as part of the concept and design of safety critical systems in order to improve safety and resilience. This book discusses the challenges of automation and automated systems when humans are left out of the loop and then need to intervene when the situation calls for it. It covers human control and accepts that humans must handle the unexpected and describes methods to support this. It is based on recent accident analysis involving autonomous systems that move our understanding forward and supports a more modern view on human errors to improve safety in industries such as shipping and marine. The book is for human factors and ergonomists, safety engineers, designers involved in safety critical work and students. Stig Ole Johnsen is a Senior Researcher at SINTEF in Norway. He has a PhD from NTNU in Norway with a focus on resilience in complex socio-technical systems and has a Master’s in Technology Management from MIT/NTNU. He chairs the Human Factors in Control network (HFC) in Norway to strengthen the human factors focus during development and implementation of safety critical technology. His research interests include meaningful human control to support safety and resilience during automation and digitalization. Thomas Porathe has a degree in Information Design from Malardalen University in Sweden. He is currently Professor of Interaction Design at the Norwegian University of Science and Technology in Trondheim, Norway. He specializes in maritime human factors and design of maritime information systems, specifically directed towards control room design, e-navigation and autonomous ships. He has been working with e-Navigation since 2006 in EU projects such as BLAST, EfficienSea, MONALISA, ACCSEAS, SESAME and the unmanned ship project MUNIN. He is active in the International Association of Aids to Navigation and Lighthouse Authorities (IALA).

Download or read book Safer Systems written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions to this book are the invited papers presented at the fifth annual Safety-critical Systems Symposium. They cover a broad spectrum of issues affecting safety, from a philosophical appraisal to technology transfer, from requirements analysis to assessment, from formal methods to artificial intelligence and psychological aspects. They touch on a number of industry sectors, but are restricted to none, for the essence of the event is the transfer of lessons and technologies between sectors. All address practical issues and of fer useful information and advice. Contributions from industrial authors provide evidence of both safety con sciousness and safety professionalism in industry. Smith's on safety analysis in air traffic control and Rivett's on assessment in the automotive industry are informative on current practice; Frith's thoughtful paper on artificial intelli gence in safety-critical systems reflects an understanding of questions which need to be resolved; Tomlinson's, Alvery's and Canning's papers report on collaborative projects, the first on results which emphasise the importance of human factors in system development, the second on the development and trial of a comprehensive tool set, and the third on experience in achieving tech nology transfer - something which is crucial to increasing safety.

Download or read book Achievement and Assurance of Safety written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each year there are improvements in safety-critical system technology. These arise both from developments in the contributing technologies, such as safety engineering, software engineering, human factors and risk assessment, and from the adoption or adaptation of appropriate techniques from other domains, such as security. For these improvements to be of real benefit, they need to be applied during the appropriate stage in the life cycle of the system, whether it be development, assessment, or operation. For this to occur, they must be communicated and explained. Each year the Safety-critical Systems Symposium offers a distinguished forum for the presentation of papers on such developments, and also for papers from industry on the lessons learned from the use of technologies and methods. The results of many collaborative research projects, with components from both industry and academia, are reported in a universally understandable form. In 1995 the Symposium was held in Brighton, a venue calculated to stimulate not just the presenters of papers, but all the delegates. Yet, this book of Proceedings is intended not only for the delegates but also for readers not able to attend the event itself. We welcome both categories of reader. Delegates have the benefit of attending the presentations and the opportunity to participate in the discussions; those who take up this book after the event can peruse it attheir leisure and, perhaps, on account of it will resolve to attend subsequent symposia.

Download or read book Current Issues in Safety Critical Systems written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Issues in Safety-Critical Systems contains the invited papers presented at the eleventh annual Safety-critical Systems Symposium, held in February 2003. The safety-critical systems domain is rapidly expanding and its industrial problems are always candidates for academic research. It embraces almost all industry sectors; current issues in one are commonly appropriate to others. The Safety-critical System Symposium provides an annual forum for discussing such issues. The papers contained within this volume cover a broad range of subjects. They represent a great deal of industrial experience as well as some academic research. All the papers are linked by addressing current issues in safety-critical systems: Dependability Requirements Engineering; Human Error Management; Influences on Risk; Safety Cases; Reforming the Law; Safety Management and Safety Standards.

Download or read book Design Specification and Verification of Interactive Systems 96 written by Francois Bodart and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Making systems easier to use implies an ever increasing complexity in managing communication between users and applications. Indeed an increasing part of the application code is devoted to the user interface portion. In order to manage this complexity, it is important to have tools, notations, and methodologies which support the designer’s work during the refinement process from specification to implementation. Selected revised papers from the Eurographics workshop in Namur review the state of the art in this area, comparing the different existing approaches to this field in order to identify the principle requirements and the most suitable notations, and indicate the meaningful results which can be obtained from them.

Download or read book Information Uncertainty and Fusion written by Bernadette Bouchon-Meunier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we stand at the precipice of the twenty first century the ability to capture and transmit copious amounts of information is clearly a defining feature of the human race. In order to increase the value of this vast supply of information we must develop means for effectively processing it. Newly emerging disciplines such as Information Engineering and Soft Computing are being developed in order to provide the tools required. Conferences such as the International Conference on Information Processing and ManagementofUncertainty in Knowledge-based Systems (IPMU) are being held to provide forums in which researchers can discuss the latest developments. The recent IPMU conference held at La Sorbonne in Paris brought together some of the world's leading experts in uncertainty and information fusion. In this volume we have included a selection ofpapers from this conference. What should be clear from looking at this volume is the number of different ways that are available for representing uncertain information. This variety in representational frameworks is a manifestation of the different types of uncertainty that appear in the information available to the users. Perhaps, the representation with the longest history is probability theory. This representation is best at addressing the uncertainty associated with the occurrence of different values for similar variables. This uncertainty is often described as randomness. Rough sets can be seen as a type of uncertainty that can deal effectively with lack of specificity, it is a powerful tool for manipulating granular information.

Download or read book Life Cycle Management For Dependability written by Felix Redmill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability has always been an vital attribute of operational systems, regardless of whether they are highly-specialised (like electricity generating plants) or more general-purpose (like domestic appliances). This volume provides a highly-readable overview of the topic, concentrating on dependability as a life-cycle management issue rather than as a technical subject. Specifically avoiding technical language and complex mathematics, it is designed to be accessible to readers at all levels. It will be of particular interest to project managers and software engineers in industries where dependability is of particular importance, such as aerospace, process control, and mining. It will also provide useful reading material for students taking courses with modules in dependability. Felix Redmill and Chris Dale have both worked in industry for over 15 years, and now run successful consultancy businesses.

Download or read book Diagnosis and Fault tolerant Control Volume 2 written by Vicenc Puig and published by John Wiley & Sons. This book was released on 2021-12-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in fault diagnosis and fault-tolerant control of dynamic processes. Its impetus derives from the need for an overview of the challenges of the fault diagnosis technique and sustainable control, especially for those demanding systems that require reliability, availability, maintainability, and safety to ensure efficient operations. Moreover, the need for a high degree of tolerance with respect to possible faults represents a further key point, primarily for complex systems, as modeling and control are inherently challenging, and maintenance is both expensive and safety-critical. Diagnosis and Fault-tolerant Control 2 also presents and compares different fault diagnosis and fault-tolerant schemes, using well established, innovative strategies for modeling the behavior of the dynamic process under investigation. An updated treatise of diagnosis and fault-tolerant control is addressed with the use of essential and advanced methods including signal-based, model-based and data-driven techniques. Another key feature is the application of these methods for dealing with robustness and reliability.

Download or read book Trends and Challenges in Maritime Energy Management written by Aykut I. Ölçer and published by Springer. This book was released on 2018-05-03 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of contemporary trends and challenges in maritime energy management (MEM). Coordinated action is necessary to achieve a low carbon and energy-efficient maritime future, and MEM is the prevailing framework aimed at reducing greenhouse gas emissions resulting from maritime industry activities. The book familiarizes readers with the status quo in the field, and paves the way for finding solutions to perceived challenges. The 34 contributions cover six important aspects: regulatory framework; energy-efficient ship design; energy efficient ship and port operation; economic and social dimensions; alternative fuels and wind-assisted ship propulsion; and marine renewable energy. This pioneering work is intended for researchers and academics as well as practitioners and policymakers involved in this important field.

Download or read book Guide to Applying Human Factors Methods written by Carlo Cacciabue and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human error plays a significant role in many accidents involving safety-critical systems, and it is now a standard requirement in both the US and Europe for Human Factors (HF) to be taken into account in system design and safety assessment. This book will be an essential guide for anyone who uses HF in their everyday work, providing them with consistent and ready-to-use procedures and methods that can be applied to real-life problems. The first part of the book looks at the theoretical framework, methods and techniques that the engineer or safety analyst needs to use when working on a HF-related project. The second part presents four case studies that show the reader how the above framework and guidelines work in practice. The case studies are based on real-life projects carried out by the author for a major European railway system, and in collaboration with international companies such as the International Civil Aviation Organisation, Volvo, Daimler-Chrysler and FIAT.

Download or read book Human Error Safety and Systems Development written by Philippe Palanque and published by Springer. This book was released on 2010-12-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent accidents in a range of industries have increased concern over the design, development, management and control of safety-critical systems. Attention has now focused upon the role of human error both in the development and in the operation of complex processes. Human Error, Safety and Systems Development gathers contributions from practitioners and researchers presenting and discussing leading edge techniques that can be used to mitigate the impact of error (both system and human) on safety-critical systems. Some of these contributions can be easily integrated into existing systems engineering practices while others provide a more theoretical and fundamental perspective on the issues raised by these kinds of interactive systems. More precisely the contributions cover the following themes: –Techniques for incident and accident analysis; –Empirical studies of operator behaviour in safety-critical systems; –Observational studies of safety-critical systems; –Risk assessment techniques for interactive systems; –Safety-related interface design, development and testing; –Formal description techniques for the design and development of safety-critical interactive systems. Many diverse sectors are covered, including but not limited to aviation, maritime and the other transportation industries, the healthcare industry, process and power generation and military applications. This volume contains 20 original and significant contributions addressing these critical questions. The papers were presented at the 7th IFIP Working Group 13.5 Working Conference on Human Error, Safety and Systems Development, which was held in August 2004 in conjunction with the 18th IFIP World Computer Congress in Toulouse, France, and sponsored by the International Federation for Information Processing (IFIP).

Download or read book Orthopaedic Pathology and Imaging written by Butterworth-Heinemann Limited and published by Butterworth-Heinemann. This book was released on 1993-07-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: