Download or read book Safety and Reliability of Programmable Electronic Systems written by Daniels and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of programmable electronic systems (PES) in industry has grown considerably with the availability of microcomputers. These systems offer many benefits to the designer and user in providing more comprehensive control of industrial processes, enviroments, machine tools and in robot installations. As confidence grows with the application of PES, users and manufacturers are considering incorporating safety functions within the requirements and functions of the PES. This book represents the proceedings of the Programmable Electronic Systems Safety Symposium (PES-3) held in Guernsey, Channel Islands, May 28th - 30th 1986, which presented the guidance available to users, designers and safety assessors of programmable electronic systems. This guidance is applicable for many real and potential risk and safety situations in a wide variety of industries ranging from nuclear power plants and industrial robotics, to machine tools and chemical process controllers. The original impetus to hold the Symposium came from a two year collaborative project partially funded by the Commission of the European Communities under the 1979-83 Informatics Initiative. The sponsors of the Symposium studied the assessment, architecture and performance of industrial programmable electronic systems, with particular reference to robotics. The group of papers in the first session give the first public report of the results of this project. The session was Chaired by H Fangmeyer from the Commission's Joint Research Centre at Ispra, Italy, who was the Commission's Project Manager throughout the collaboration.

Download or read book Reliability of Safety Critical Systems written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the theory and methodology for reliability assessments of safety-critical functions through examples from a wide range of applications Reliability of Safety-Critical Systems: Theory and Applications provides a comprehensive introduction to reliability assessments of safety-related systems based on electrical, electronic, and programmable electronic (E/E/PE) technology. With a focus on the design and development phases of safety-critical systems, the book presents theory and methods required to document compliance with IEC 61508 and the associated sector-specific standards. Combining theory and practical applications, Reliability of Safety-Critical Systems: Theory and Applications implements key safety-related strategies and methods to meet quantitative safety integrity requirements. In addition, the book details a variety of reliability analysis methods that are needed during all stages of a safety-critical system, beginning with specification and design and advancing to operations, maintenance, and modification control. The key categories of safety life-cycle phases are featured, including strategies for the allocation of reliability performance requirements; assessment methods in relation to design; and reliability quantification in relation to operation and maintenance. Issues and benefits that arise from complex modern technology developments are featured, as well as: Real-world examples from large industry facilities with major accident potential and products owned by the general public such as cars and tools Plentiful worked examples throughout that provide readers with a deeper understanding of the core concepts and aid in the analysis and solution of common issues when assessing all facets of safety-critical systems Approaches that work on a wide scope of applications and can be applied to the analysis of any safety-critical system A brief appendix of probability theory for reference With an emphasis on how safety-critical functions are introduced into systems and facilities to prevent or mitigate the impact of an accident, this book is an excellent guide for professionals, consultants, and operators of safety-critical systems who carry out practical, risk, and reliability assessments of safety-critical systems. Reliability of Safety-Critical Systems: Theory and Applications is also a useful textbook for courses in reliability assessment of safety-critical systems and reliability engineering at the graduate-level, as well as for consulting companies offering short courses in reliability assessment of safety-critical systems.

Download or read book Safety and Reliability of Programmable Electronic Systems written by 3Island Press and published by . This book was released on 1986-05-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guidelines for Safe and Reliable Instrumented Protective Systems written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the decision-making processes for the management of instrumented protective systems (IPS) throughout a project's life cycle. It uses the new IEC 61511 standard as a basis for the work processes used to achieve safe and reliable process operation. By walking the reader through a project's life cycle, engineering, maintenance, and operations, the information allows users to easily focus on their responsibilities and duties. Using this approach, the book is useful as a primer, guidelines reference, and resource manual. Examples provide the added "real-world" experience applications.

Download or read book Safety and Reliability Theory and Applications written by Marko Cepin and published by CRC Press. This book was released on 2017-06-14 with total page 6847 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Theory and Applications contains the contributions presented at the 27th European Safety and Reliability Conference (ESREL 2017, Portorož, Slovenia, June 18-22, 2017). The book covers a wide range of topics, including: • Accident and Incident modelling • Economic Analysis in Risk Management • Foundational Issues in Risk Assessment and Management • Human Factors and Human Reliability • Maintenance Modeling and Applications • Mathematical Methods in Reliability and Safety • Prognostics and System Health Management • Resilience Engineering • Risk Assessment • Risk Management • Simulation for Safety and Reliability Analysis • Structural Reliability • System Reliability, and • Uncertainty Analysis. Selected special sessions include contributions on: the Marie Skłodowska-Curie innovative training network in structural safety; risk approaches in insurance and fi nance sectors; dynamic reliability and probabilistic safety assessment; Bayesian and statistical methods, reliability data and testing; oganizational factors and safety culture; software reliability and safety; probabilistic methods applied to power systems; socio-technical-economic systems; advanced safety assessment methodologies: extended Probabilistic Safety Assessment; reliability; availability; maintainability and safety in railways: theory & practice; big data risk analysis and management, and model-based reliability and safety engineering. Safety and Reliability – Theory and Applications will be of interest to professionals and academics working in a wide range of industrial and governmental sectors including: Aeronautics and Aerospace, Automotive Engineering, Civil Engineering, Electrical and Electronic Engineering, Energy Production and Distribution, Environmental Engineering, Information Technology and Telecommunications, Critical Infrastructures, Insurance and Finance, Manufacturing, Marine Industry, Mechanical Engineering, Natural Hazards, Nuclear Engineering, Offshore Oil and Gas, Security and Protection, Transportation, and Policy Making.

Download or read book Safety and Reliability of Software Based Systems written by Roger Shaw and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability of Software Based Systems contains papers, presented at the twelfth annual workshop organised by the Centre for Software Reliability. Contributions come from different industries in many countries, and provide discussion and cross-fertilisation of ideas relevant to systems whose safety and/or reliability are of paramount concern. This book discusses safety cases and their varying roles in different industries; using measurement to improve reliability and safety of software-based systems; latest developments in managing, developing and assessing software intensive systems where reliability and/or safety are important considerations; and practical experiences of others in industry.

Download or read book Advances in Safety and Reliability written by C. Guedes Soares and published by Elsevier. This book was released on 1997-06-19 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: These three volumes comprise the papers presented at the ESREL '97 International Conference on Safety and Reliability held in Lisbon, Portugal, 17-20 June 1997. The purpose of the annual ESREL conferences is to provide a forum for the presentation of technical and scientific papers covering both methods and applications of safety and reliability to a wide range of industrial sectors and technical disciplines and, in so doing, to enhance cross-fertilization between them.A broad view is taken of safety and reliability which includes probabilistically-based methods, or, more generally, methods that deal with the quantification of the uncertainty in the knowledge of the real world and with decision-making under this uncertainty.The areas covered include: design and product liability; availability, reliability and maintainability; assessment and management of risks to technical systems; health and the environment; and mathematical methods of reliability and statistical analysis of data.The organization of the book closely follows the sessions of the conference with each of the three volumes containing papers from two parallel sessions, comprising a total of 270 papers by authors from 35 countries.

Download or read book Functional Safety written by David Smith and published by Routledge. This book was released on 2004-08-13 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical, electronic and programmable electronic systems, such as emergency shut down systems and railway signalling systems, increasingly carry out safety functions to guard workers and the public against injury or death and the environment against pollution. The international standard IEC 61508 has been developed as a generic standard that applies to all these systems irrespective of their application. IEC 61508 is seen by many professionals as complex. This book overcomes that complexity by introducing the standard in the context of safety in general before moving on to provide practical advice about implementing it and obtaining certification. It also explains how IEC 61508 relates to second tier standards and related guidance, such as IEC 61511, 61513, UKOOA, ISA S84.01 and DIN standards, among others. Throughout the text, the authors illustrate their explanations with examples to which the answers are supplied in the appendix. Four case studies with further exercises set the information in context. Templates and checklists for drawing up your own implementation plan and information on self-certification are also provided. As Functional Safety, the standard, is applicable to many industries, Functional Safety, the book, in its previous edition has proved to be an invaluable reference for professionals from a variety of industries, such as project/instrumentation/design/control engineers as well as safety professionals in oil and gas, chemical, rail, power generation, nuclear, aircraft, and automotive industries. The new edition includes a new chapter on IEC 61511, the process sector standard, published since the first edition. The text has been updated throughout in light of the authors’ recent experience and two case studies have been added. Dr. David J Smith, BSc, PhD, CEng, FIEE, HonFSaRS, FIQA, MIGasE, has been directly concerned with reliability, safety and software quality for 30 years. He has written a number of books on the subject as well as numerous papers. His PhD thesis was on the subject of reliability prediction accuracy and common cause failure. He chairs the IGasE panel which develops its guidelines on safety-related systems (now in its third edition). He has also made contributions to IEC 61508. Kenneth G. L. Simpson, MPhil, FIEE, FInstMC, MIGasE, has been associated with safety-related systems design and also with their assessment for 25 years. He is a member of the IEC 61508 drafting committee and also of the I Gas E panel which writes the gas industry guidance. Following a career in aerospace, Ken has spent 20 years in the control system industry and is a Director of Silvertech International plc, a leading designer of safety and control systems. He has written a number of papers on the topic and gives frequent talks.

Download or read book Safety and Reliability of Complex Engineered Systems written by Luca Podofillini and published by CRC Press. This book was released on 2015-09-03 with total page 4627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability of Complex Engineered Systems contains the Proceedings of the 25th European Safety and Reliability Conference, ESREL 2015, held 7-10 September 2015 in Zurich, Switzerland. Including 570 papers on theories and methods in the area of risk, safety and reliability, and their applications to a wide range of industrial, civil and social sectors, this book will be of interest to academics and professionals involved or interested in aspect of risk, safety and reliability in various engineering areas.

Download or read book Automotive Electronics Reliability written by Ronald K Jurgen and published by SAE International. This book was released on 2010-08-10 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle reliability problems continue to be the news because of major vehicle recalls from several manufacturers. This book includes 40 SAE technical papers, published from 2007 through 2010, that describe the latest research on automotive electronics reliability technology. This book will help engineers and researchers focus on the design strategies being used to minimize electronics reliability problems, and how to test and verify those strategies. After an overview of durability, risk assessment, and failure mechanisms, this book focuses on state-of-the-art techniques for reliability-based design, and reliability testing and verification. Topics include: powertrain control monitoring distributed automotive embedded systems model-based design x-by-wire systems battery durability design verification fault tree analysis The book also includes editor Ronald K. Jurgen’s introduction ,“Striving for Maximum Reliability in a Highly Complex Electronic Environment”, and a concluding section on the future of electronics reliability, including networking technology, domain control units, the use of AUTOSAR, and embedded software.

Download or read book Risk Reliability and Safety Innovating Theory and Practice written by Lesley Walls and published by CRC Press. This book was released on 2016-11-25 with total page 4767 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable performance of many systems with which we interact daily has been achieved through the analysis and management of risk. From complex infrastructures to consumer durables, from engineering systems and technologies used in transportation, health, energy, chemical, oil, gas, aerospace, maritime, defence and other sectors, the management of risk during design, manufacture, operation and decommissioning is vital. Methods and models to support risk-informed decision-making are well established but are continually challenged by technology innovations, increasing interdependencies, and changes in societal expectations. Risk, Reliability and Safety contains papers describing innovations in theory and practice contributed to the scientific programme of the European Safety and Reliability conference (ESREL 2016), held at the University of Strathclyde in Glasgow, Scotland (25—29 September 2016). Authors include scientists, academics, practitioners, regulators and other key individuals with expertise and experience relevant to specific areas. Papers include domain specific applications as well as general modelling methods. Papers cover evaluation of contemporary solutions, exploration of future challenges, and exposition of concepts, methods and processes. Topics include human factors, occupational health and safety, dynamic and systems reliability modelling, maintenance optimisation, uncertainty analysis, resilience assessment, risk and crisis management.

Download or read book Safety and Reliability Safe Societies in a Changing World written by Stein Haugen and published by CRC Press. This book was released on 2018-06-15 with total page 4379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Safe Societies in a Changing World collects the papers presented at the 28th European Safety and Reliability Conference, ESREL 2018 in Trondheim, Norway, June 17-21, 2018. The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk management Safety and Reliability – Safe Societies in a Changing World will be invaluable to academics and professionals working in a wide range of industrial and governmental sectors: offshore oil and gas, nuclear engineering, aeronautics and aerospace, marine transport and engineering, railways, road transport, automotive engineering, civil engineering, critical infrastructures, electrical and electronic engineering, energy production and distribution, environmental engineering, information technology and telecommunications, insurance and finance, manufacturing, marine transport, mechanical engineering, security and protection, and policy making.

Download or read book Leveraging Applications of Formal Methods Verification and Validation written by Tiziana Margaria and published by Springer. This book was released on 2010-11-02 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the conference proceedings of the 4th International S- posium on Leveraging Applications of Formal Methods, Veri?cation and Vali- tion, ISoLA 2010, which was held in Greece (Heraklion, Crete) October 18–21, 2010, and sponsored by EASST. Following the tradition of its forerunners in 2004, 2006, and 2008 in Cyprus and Chalchidiki, and the ISoLA Workshops in Greenbelt (USA) in 2005, in Poitiers (France) in 2007, and in Potsdam (Germany) in 2009, ISoLA 2010 p- vided a forum for developers, users, and researchers to discuss issues related to the adoption and use of rigorous tools and methods for the speci?cation, ana- sis, veri?cation, certi?cation, construction, testing, and maintenance of systems from the point of view of their di?erent application domains. Thus, the ISoLA series of events serves the purpose of bridging the gap between designers and developers of rigorous tools, and users in engineering and in other disciplines, and to foster and exploit synergetic relationships among scientists, engineers, software developers, decision makers, and other critical thinkers in companies and organizations. In particular, by providing a venue for the discussion of c- mon problems, requirements, algorithms, methodologies, and practices, ISoLA aims at supporting researchers in their quest to improve the utility, reliability, ?exibility, and e?ciency of tools for building systems, and users in their search for adequate solutions to their problems.

Download or read book Railway Safety Reliability and Security Technologies and Systems Engineering written by Flammini, Francesco and published by IGI Global. This book was released on 2012-05-31 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human errors, as well as deliberate sabotage, pose a considerable danger to passengers riding on the modern railways and have created disastrous consequences. To protect civilians against both intentional and unintentional threats, rail transportation has become increasingly automated. Railway Safety, Reliability, and Security: Technologies and Systems Engineering provides engineering students and professionals with a collection of state-of-the-art methodological and technological notions to support the development and certification of ‘real-time safety-critical’ railway control systems, as well as the protection of rail transportation infrastructures.

Download or read book Control Systems Safety Evaluation and Reliability written by William M. Goble and published by ISA. This book was released on 2010 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve a wide variety of users. This updated third edition provides the detailed background necessary to understand how to meet important new safety regulations and reliability engineering topics. Professional control system designers will learn to properly evaluate control system components, various system architectures, how to better communicate with vendors, and how to increase accuracy of life-cycle cost estimates. The book is also an excellent text for college courses due to its detailed explanations, practical presentation, and discussion of the difference between theory and real-world application. It provides a basic foundation of material, including probability, statistics, reliability theory definitions, and basic reliability modeling techniques, as well as advanced topics relevant to safety instrumented and control systems. Each chapter contains exercises to assist the reader in applying the theories presented with their practical implementation.

Download or read book Optical Coherence Tomography in Cardiovascular Research written by Evelyn Regar and published by CRC Press. This book was released on 2007-03-06 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given that for centuries, the standard tool to understand diseases in tissues was the microscope and that its major limitation was that only excised tissue could be used, recent technology now permits the examination of diseased tissue in vivo. Optical coherence tomography (OCT) has promising potential when applied to coronary artery disease. OCT has the capability to identify coronary plaque and to distinguish between plaques that are stable and unstable. If the plaques are stable then OCT can direct percutaneous intervention (angioplasty or stenting). Optical coherence tomography is a light-based imaging technology that allows for very high resolution imaging in biological tissues. It has been first applied in ophthalmology, where it soon became the golden standard for the assessment of (epi-) retinal processes. The unique imaging capabilities have raised the interest of researchers and clinicians in the field of cardiovascular disease, since OCT offers unique possibilities to study atherosclerosis pathophysiology in vivo. With over 1.1M Americans having a heart attack this year because of unstable plaque rupture, OCT may have an increasingly important role in the early diagnosis of coronary artery disease. This unique publication offers the reader the basic background to OCT and its role in the diagnosis and management of coronary artery disease. The Handbook of Optical Coherence Tomography in Cardiovascular Research introduces the cardiovascular application of this technology. Clinicians, biologists, engineers and physicist are discussing different aspects of cardiovascular OCT application in a multidisciplinary approach. The handbook offers the readership a concise overview on the current state of the art of vascular OCT imaging and sheds light on a variety of exciting new developments. The physics, technical principles of OCT and its application in a broad spectrum of cardiovascular research areas are summarized by highly recognized specialists. The potential of OCT in peripheral and coronary arteries and in developmental cardiology are described. Each research area is introduced by a clinical expert in the field followed by discussion of different aspects from an engineering, biomedical and clinical perspective. Specifically, the current capabilities for plaque characterization, detection of vulnerable plaque, guidance of interventional procedures, Doppler-assessment, and molecular contrast imaging are being described. The Handbook of Optical Coherence Tomography in Cardiovascular Research targets researchers and clinicians involved in the field of atherosclerosis. The summary of basic physics, engineering solutions, pre-clinical and clinical application covers all relevant aspects and will be a valuable reference source.

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field