Download or read book Rubber Hoses and Hose Assemblies for Automobile Power Steering Systems written by British Standards Institution and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rubber Hoses and Hose Assemblies for Automobile Power Steering Systems Specification written by British Standards Institute Staff and published by . This book was released on 1997-01-15 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible pipes, Pipe fittings, Vulcanized rubber, Synthetic rubber, Private cars, Steering control devices, Power (mechanics), Pressure, Working range, Temperature, Grades (quality), Dimensions, Diameter, Strength of materials, Testing conditions, Test pressure, Dimensional changes, Low temperatures, Flexibility, Adhesive strength, Ozone, Chemical-resistance tests, Contamination, Pressure testing, Performance testing, Burst tests, Marking, Volume measurement, Test specimens, Expansion (deformation)

Download or read book Rubber Hoses and Hose Assemblies for Automobile Power steering Systems Specification written by British Standards Institution and published by . This book was released on 1997 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Specification for Rubber Hoses and Hose Assemblies for Automobile Power Steering Systems written by British Standards Institution and published by . This book was released on 1986 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rubber Hoses and Hose Assemblies for Automotive Power Steering Systems Specification written by Malaysia. Jabatan Standard and published by . This book was released on 2004 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Power Steering Pressure Hose written by Automotive Brake and Steering Hose Standards Comm and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers two types of hose fabricated from textile reinforcement and synthetic rubber, assembled with end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of 40 to +150 °C (40 to +302 °F) maximum and 10.3 MPa (1500 psi) maximum working pressure. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsation is required. Class A hose has a nominal OD of 19.84 mm (0.781 in). Class B hose is a lightweight hose with a nominal OD of 17.91 mm (0.705 in). This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering pump to the steering gear. The technical report covers technology, products, or processes which are mature and not likely to change in the foreseeable future.

Download or read book Power Steering Return Hose Low Pressure written by Automotive Brake and Steering Hose Standards Comm and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers hose fabricated from fabric braid and synthetic rubber, assembled with end fittings or user applied clamps for use in automotive power steering applications as flexible connections within the temperature range of 40 °C to +120 °C (40 °F to 250 °F) average and 135 °C (275 °F) maximum peaks. Hose assemblies shall be suitable for 1.72 MPa (250 psi) maximum working pressure with end fittings and 0.69 MPa (100 psi) maximum working pressure with user applied clamps.

Download or read book Power Steering Pressure Hose Wire Braid written by Automotive Brake and Steering Hose Standards Comm and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers hose fabricated from wire braid and synthetic rubber, assembled with end fittings for use in automotive applications up to 10.3 MPa (1500 psi) maximum pressure, as flexible connections within the temperature range of -40 °C to 121 °C (-40 °F to +250 °F) average, 13.5 °C (275 °F) maximum peaks. The specification in this SAE Standard originated in the SAE-ASTM Technical Committee on Automotive Rubber (other than tires). They represent the correlation of the best information available from research investigation and production experience on the minimum constructional and performance characteristics essential for new power steering assemblies used as original or replacement equipment. This standard applies to passenger cars. It may prove useful to truck manufacturers, but it is not to be presented as present practices. They also represent the minimum quality recognized by original equipment manufacturers and hose suppliers as essential for satisfactory and safe operation by the hose itself and other coacting parts of the power steering system. The original equipment manufacturer may, at his option, add or alter tests through OEM specifications.The document has been designated non-current by the Auto Brake and Steering Hose Committee. There have been no changes to the document since the last revision (MAY 1998) due to the absence of technical experts for the standard on the committee. Care should be taken by those using this standard and recognize its non-current designation.

Download or read book High Temperature Power Steering Return Hose Low Pressure written by Automotive Brake and Steering Hose Standards Comm and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers hose fabricated from textile reinforcement and synthetic rubber, assembled with clamps and/or end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of 40 to +150 °C (40 to +302 °F) maximum and 1.21 MPa (175 psi) maximum working pressure. This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering gear back to the pump/reservoir. This document has been determined to contain basic and stable technology which is not dynamic in nature.

Download or read book Power Steering Pressure Hose Low Volumetric Expansion Type written by Automotive Brake and Steering Hose Standards Comm and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications at pressures as indicated in Table 1B, as flexible connections within the temperature range of -40 C (-40 F) to 121C (250 F) average, 135 C (275 F) maximum peaks.These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is not required.

Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 1997 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Steering Pressure Hose High Volumetric Expansion Type written by Automotive Brake and Steering Hose Standards Comm and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document covers two types of hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications as flexible connections within the temperature range of -40 C to +120 °C (-40 F to +250 °F) average, and 135 C (275 F) maximum peaks.These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is required.Type 1 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure.Type 2 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure.

Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2008 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book QC T 1012 2015 Translated English of Chinese Standard QCT 1012 2015 QC T1012 2015 QCT1012 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-09-02 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the technical requirements and determination for cleanliness of automotive hydraulic power steering system components. This Standard is applicable to the automotive hydraulic power steering system components including automotive hydraulic power steering gear, steering oil pump, steering oil tank, steering power cylinder, steering oil tube, and joint.

Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).

Download or read book Products and Services Catalogue written by and published by . This book was released on 1999 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Speciality Rubbers written by J. A. Brydson and published by iSmithers Rapra Publishing. This book was released on 1994 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Speciality rubbers account for 15% of world rubber consumption in financial terms in spite of providing just 4% by c099. Their most important property is generally a high heat resistance, frequently required in combination with hydrocarbon oil resistance. Other key properties may include flexibility at low temperatures and long service life. 400 Abstracts from the Rapra Polymer Library.